High CPU Usage after upgrading to 22.05

Rockyuk

Hi Everyone,
I updated my pfsense last night to 22.05 and noticed straight away after upgrading 100% CPU usage. When I disable pfBlockerNG the CPU usage goes back to normal and all worked fine on my previous version of pfsense. So, not sure now why pfBlockerNG is causing 100% CPU with the new version is anyone else experiencing this?

Thanks

Rockyuk

SteveITS

@rockyuk I've seen posts but not 100% usage and haven't seen issues myself. See
https://forum.netgate.com/topic/173083/22-05-and-pfblocker/

provels

My little VM with the packages in my sig seems to be running normally.

Rockyuk

There was an issue with it, I spoke to the developer and they provided the following solution.

https://www.reddit.com/r/pfBlockerNG/comments/v7zp72/ip_block_logging_not_working_in_2205_plus_release/

dennypage

Known issue with a simple fix.

Mike-moon

Hi all, I have applied the fix referenced above but I still have 30-40% CPU usage at an i3 with 3.7GHz. With the previous version 22.01 the CPU usage was typically below 10%.
Could there be an additional issue?
Thanks, Mike

sretalla

I can confirm I saw the issue with pfBlocker and was able to fix it by following this patch (already linked via posts above):
https://redmine.pfsense.org/issues/13154s

I guess I don't need to say what time I performed the fix. (I needed to restart pfBlocker after doing it)

Mike-moon

@mike-moon said in High CPU Usage after upgrading to 22.05:

Hi all, I have applied the fix referenced above but I still have 30-40% CPU usage at an i3 with 3.7GHz. With the previous version 22.01 the CPU usage was typically below 10%.
Could there be an additional issue?
Thanks, Mike

Sorry, I made a mistake when applying the fix: I removed the bracket between the two quotes but did not replace that bracket by a space as required. After correcting this the CPU usage jumped down and the core temperatures decreased about 10 degrees. So everything is fine.
Mike

tohil

Hi,

Upgraded the first firewall to 22.05, but I'm not experiencing high cpu load by pfblockerng.
has this issue already been fixed in a new package release?

/usr/local/pkg/pfblockerng/pfblockerng.inc on line 4139 at my install:

 foreach ($list_type as $ip_type => $vtype) {
                        if (!empty($config['installedpackages'][$ip_type]['config'])) {
                                foreach ($config['installedpackages'][$ip_type]['config'] as $key => $list) {
                                        if (!is_array($list)) {
                                                $list = array();
                                        }
                                        if (!is_array($list['row'])) {
                                                $list['row'] = array();
                                        }

                                        if ($vtype == '_v4') {
                                                $list['vtype'] = '_v4';
                                        } else {
                                                $list['vtype'] = '_v6';
                                        }

                                        // Collect list array key location
                                        $list['key'] = "{$key}";

                                        // If only the 'customlist' is defined. Remove the 'List row' data.
                                        if (empty($list['row'][0]['url'])) {
                                                unset($list['row']);
                                        }

fireodo

@tohil said in High CPU Usage after upgrading to 22.05:

/usr/local/pkg/pfblockerng/pfblockerng.inc on line 4139 at my install:

Maybe your Texteditor is counting wrong:

Here at line 4139 is "$r = explode(' ', $result, 2);"

tohil

@fireodo said in High CPU Usage after upgrading to 22.05:

$r = explode(' ', $result, 2)

Hi

I'm using vi and jump to:4139

I even cannot find that line....
vi /usr/local/pkg/pfblockerng/pfblockerng.inc

fireodo

@tohil said in High CPU Usage after upgrading to 22.05:

@fireodo said in High CPU Usage after upgrading to 22.05:

$r = explode(' ', $result, 2)

Hi

I'm using vi and jump to:4139

I even cannot find that line....
vi /usr/local/pkg/pfblockerng/pfblockerng.inc
If you trust me:
pfblockerng.txt
You have to change the .txt to .inc
Changes are allready made - you can replace the file directly.

tohil

@fireodo
Okay, now its going kind of weird. I've compared my file (putty.log) with your text...
it seems like the file version is not the same....
alt text

fireodo

@tohil
Hmmm,

I have here pfblocker 3.1.0_4 devel and this pfblocker.inc file

tohil

@fireodo
I have pfBlocker 2.1.4_27

Is this issue just with dev version?
Checked the bugtracker entry:

I'm running this on 22.01-Release and this was CPU load was not occurring prior to 3.1.0.4.

So everyone not using pfBlockerNG higher than 3.1.04 will be affected...

fireodo

@tohil said in High CPU Usage after upgrading to 22.05:

@fireodo
I have pfBlocker 2.1.4_27

Is this issue just with dev version?

Ooooh - in this case the file is NOT for this old Version!!! But the problem is the same the line number must be in this old version different - I suggest to upgrade to the devel version wich is actually maintained! But its in the end your decision!

Edit: If you find in your pfblocker .inc

$r = explode(')', $result, 2);

then you should replace it with:

$r = explode(' ', $result, 2);

tohil

@fireodo
https://forum.netgate.com/topic/156604/pfblockerng-vs-pfblockerng-devel/7

https://forum.netgate.com/topic/172036/solved-pfblocker-stable-vs-devel/3

It seems I have to update and go to the devel version on all my installs...

fireodo

@tohil said in High CPU Usage after upgrading to 22.05:

@fireodo
https://forum.netgate.com/topic/156604/pfblockerng-vs-pfblockerng-devel/7

It seems I have to update and go to the devel version on all my installs...

That would (from my point of view) be a good move ...
(as far I recall, there should be no problems and all your settings are preserved - but BACKUP is allways recommended )

johnpoz

@mike-moon said in High CPU Usage after upgrading to 22.05:

I removed the bracket between the two quotes but did not replace that bracket by a space as required

I made the same mistake doing the patch by hand - hehehe

Yup what a difference.

I was thinking that "fix" didn't seem to do much.. Then as you can see from graph after putting in the space between the 's cpu util dropped off to normal, and yup did see a couple of degrees difference in the temp as well.

FrankZappa

@johnpoz Johnpoz, can you give a "how to for idiots" on changing the script?
I've never changed the script file and not sure how to do it e.g. What software (Putty?/Text Editor, etc) and where do I go to change it.

Sorry, I'm a newbie at this.