pfSense 22.05 breaks VLANS, restoring pfSense 22.01 fixes the issue
-
@johnpoz said in pfSense 22.05 breaks VLANS, restoring pfSense 22.01 fixes the issue:
@nrgia said in pfSense 22.05 breaks VLANS, restoring pfSense 22.01 fixes the issue:
So maybe not beeing part of any VLAN , the traffic is transmitted to VLAN 0
That shouldn't ever be able to happen.. I have never seen a switch where there wasn't a pvid on an interface. So if untagged the traffic would be on whatever the pvid is, which normally would be default vlan 1 of the switch.
So a PVID is set by default to 1 if it's not set to anything else, ok then what is vlan 0? As I read out, some say VLAN 1 is the default, others that VLAN 0 is the default. As you saw my switch can only tag from 1 above...then I'm trying to understand which device in the network sets VLAN 0 tag?
-
@nrgia said in pfSense 22.05 breaks VLANS, restoring pfSense 22.01 fixes the issue:
then what is vlan 0
That is a special use vlan - it is not commonly used.. Its used normally to set priority when the actual vlan is not known, or whatever can not set the priority on the actual vlan.
It is a special use.. when a switch sees a vlan 0, it should set the priority of the frame to whatever the priority is on on vlan 0 to whatever the default vlan/native vlan for that port is, ie the pvid.. Which normally is 1 on any switch, unless it has been changed by the operator..
Here is what I can tell you how uncommon it is in the normal enterprise - I have never in 30 some years working in the biz, ever had need/want to set that on any sort of switches or routers, and have worked with lots and lots of them over the years. Nor have I ever seen it in the field on any pcaps, or any pcaps sent to me from multiple customer and locations - and I work for a major player, and have gotten pcaps for things they want help on from really all over the globe. Vlan 0 has never been part of any discussion or troubleshooting have ever been involved in. Now is it possible it was there and pcaps sent to me didn't have it - ok sure. But I have to say its not a very common used thing in my personal and professional opinion.
That your seeing them it is odd for sure..
-
@johnpoz said in pfSense 22.05 breaks VLANS, restoring pfSense 22.01 fixes the issue:
@nrgia said in pfSense 22.05 breaks VLANS, restoring pfSense 22.01 fixes the issue:
then what is vlan 0
That is a special use vlan - it is not commonly used.. Its used normally to set priority when the actual vlan is not known, or whatever can not set the priority on the actual vlan.
It is a special use.. when a switch sees a vlan 0, it should set the priority of the frame to whatever the priority is on on vlan 0 to whatever the default vlan/native vlan for that port is, ie the pvid.. Which normally is 1 on any switch, unless it has been changed by the operator..
Here is what I can tell you how uncommon it is in the normal enterprise - I have never in 30 some years working in the biz, ever had need/want to set that on any sort of switches or routers, and have worked with lots and lots of them over the years. Nor have I ever seen it in the field on any pcaps, or any pcaps sent to me from multiple customer and locations - and I work for a major player, and have gotten pcaps for things they want help on from really all over the globe. Vlan 0 has never been part of any discussion or troubleshooting have ever been involved in. Now is it possible it was there and pcaps sent to me didn't have it - ok sure. But I have to say its not a very common used thing in my personal and professional opinion.
That your seeing them it is odd for sure..
pfff...As deeper we go in, the more weirder it becomes.
The point is, if it was a package, like Suricata, or something, I could live without...but this is something that prevents me, to use pfSense. Sure, for a few months 22.01 is sound, but after those...I mean you guys are way more experienced than me, and ran out of ideas...
Can I at least ask both of you @johnpoz and @stephenw10 , to just drop me a message, if you stumble upon the same issue on other users posts, and you find a solution.
If you please @stephenw10 and find out, that something changed upstream in FreeBSD, can you let me know to test again?Thank you guys for your time, I will not dare to keep more on this. If you have any news, ideas please let me know.
Thank you again. -
@nrgia said in pfSense 22.05 breaks VLANS, restoring pfSense 22.01 fixes the issue:
So due to the fact that for the same port I have tagged and untagged, maybe the tags for the VLANS get stripped ? And only the traffic to VLAN 0(1) remains?
I was suggesting that what might have happened to get that client a dhcp lease on LAN is that while making changes to the QoS settings at some point the switch removed the VLAN tags from the port long enough for the DHCP sequence to complete.
Where as if you had your LAN assigned as ix2.10, for example, untagged traffic arriving at pfSense would simply be dropped.That's a completely separate issue to the inexplicable VLAN 0 tags we see in the pcaps though.
And I agree VLAN 0 (priority) tagged traffic is rare. I've only seen it in DHCP traffic arriving from an ISP.Steve
-
-
@stephenw10 said in pfSense 22.05 breaks VLANS, restoring pfSense 22.01 fixes the issue:
get a mirror port working that could see all the tagged traffic on your Netgear switch?
No I haven't I got tied up with real work stuff.. And have to look into being able to sniff vlan traffic on windows machine before hand anyway.. Or might be easier to just mirror the traffic to a spare interface on pfsense ;) That will be much easier I think.
-
@stephenw10 said in [pfSense 22.05 breaks VLANS, restoring pfSense 22.01 fixes the issue]
@NRgia Do you have any other interfaces you can use on that box? Or could you add any?
Steve
Yep, I have 4, only 2 are used
Is this board:
https://www.supermicro.com/en/products/motherboard/A2SDi-4C-HLN4FI tried to find something that resembles to Netgate Hardware, and not to be a no name board, but this is another discussion.
-
@stephenw10 said in pfSense 22.05 breaks VLANS, restoring pfSense 22.01 fixes the issue:
@nrgia said in pfSense 22.05 breaks VLANS, restoring pfSense 22.01 fixes the issue:
So due to the fact that for the same port I have tagged and untagged, maybe the tags for the VLANS get stripped ? And only the traffic to VLAN 0(1) remains?
I was suggesting that what might have happened to get that client a dhcp lease on LAN is that while making changes to the QoS settings at some point the switch removed the VLAN tags from the port long enough for the DHCP sequence to complete.
Where as if you had your LAN assigned as ix2.10, for example, untagged traffic arriving at pfSense would simply be dropped.That's a completely separate issue to the inexplicable VLAN 0 tags we see in the pcaps though.
And I agree VLAN 0 (priority) tagged traffic is rare. I've only seen it in DHCP traffic arriving from an ISP.Steve
Telling you that I saw the word (Incomplete) under DHCP leases table, will be of any help? I only saw this Incomplete during the last tests
-
Mmm, so only the 4 ix NICs on board. Is it in a case you can use the PCIe slow in to add another type of NIC?
That would be an easy way to prove out the driver/hardware vs config/network. -
@stephenw10 said in pfSense 22.05 breaks VLANS, restoring pfSense 22.01 fixes the issue:
Mmm, so only the 4 ix NICs on board. Is it in a case you can use the PCIe slow in to add another type of NIC?
That would be an easy way to prove out the driver/hardware vs config/network.I thought of that, unfortunately I don't have any low profiles NICs to test. For the low profile I need to buy one.
The chassis looks like this:https://www.supermicro.com/en/products/system/Mini-ITX/SYS-E300-9A-4C.cfm
In the PCI port I have a Riser card, in which a low profile NIC must be inserted.
I also want to be the driver, but you also tested with a board that uses ix driver. What is your NIC model? Mine is X553. Maybe the model counts also?
What if we do a little hack, it should work, for example to build an if_ix.ko on pfSense 22.01, then install pfSense 22.05, and load the .ko from the 22.01. Do you think it's a good test?
-
Yeah it seems unlikely to be the driver because that's the same SoC with the same NICs we use in the 6100 and 7100. And the 7100 uses VLANs on it by default.
Kernel modules from 22.01 will not load in the 22.05 kernel. At least most won't, especially something like that. You would have to build the 22.01 driver against 22.05. And it probably won't build without some work. You might be able to just revert the patch we think went in the created the issue in your network and compile that. However if it does that only proves the VLAN0 handling was bad.
We need to see pcap on a mirror port showing all the traffic on the wire going into the port with working two way connectivity.
It almost impossible to believe the driver could add those tags to incoming packets. Incorrectly removing them in 22.01 is far more likely.
Steve
-
@stephenw10 I just don't see how the driver would add them as well - that just makes no sense. And if that was the case as you mention you have it on a bunch of devices sold by netgate. And hard to believe he is the only one running this specific MB etc. But the driver would be the same.. So why would add something in on his, but not all the others?
So what would be something different on his hardware where something wrong with drive adding the vlan 0, but nothing else is - I would think lots of people running 22.05 with ix interfaces - why is the board not a flame with people saying their vlans are not working.
This is something pretty unique in this setup that is causing it.. Just missing what that something is in trying to solve the puzzle.
btw: I will fire up the mirror port on my netgear tmrw, unless something breaks or catches fire I have a pretty empty cal tmrw with real life work ;)
-
Yup, I agree. I seems far more likely we are just failing to capture the offending traffic at this point.
Except it appeared to do the same thing with the AP connected directly to ix2.
So now I'm starting to doubt things! -
@stephenw10 said in pfSense 22.05 breaks VLANS, restoring pfSense 22.01 fixes the issue:
it seems unlikely to be the driver because that's the same SoC with the same NICs we use in the 6100 and 7100. And the 7100 uses VLANs on it by default.
I don't know if you have the management LAN, on Native LAN, you have it also on VLAN, like VLAN 10 or something? Maybe you can try replicate my setup, although you don't have the same switch. Or maybe I ask to much, it was just an idea.
I mean is there any mistake in this picture for LAN:
https://imgur.com/a/WIZZ6rB
?If I can do something else, let me know
-
That should work fine. You do have spare NICs so you could try other setups like putting VLANs 20 and 30 on ix1 and running a second link to the switch. But it should work as you have it now in 22.05.
-
@stephenw10 said in pfSense 22.05 breaks VLANS, restoring pfSense 22.01 fixes the issue:
That should work fine. You do have spare NICs so you could try other setups like putting VLANs 20 and 30 on ix1 and running a second link to the switch. But it should work as you have it now in 22.05.
I think I can repurpose another mini pc that uses igb and em drivers(for a few hours). But I will need some time to save my work. Then just to understand what it will prove:
- If it works on another machine with other type of NICs then it's not the switch.
- If it doesn't it means it's the switch?
I'm trying to double check with you on this, to make sure this will not be in vain, because what I see here https://github.com/pfsense/FreeBSD-src/commit/9c762cc125c0c2dae9fbf49cc526bb97c14b54a4 is that the fix is also for igb and em drivers.
-
Yes if the switch is really tagging the traffic with VLAN0 it should fail using any NIC/driver in 22.05.
Though as I understand it we also saw that when the switch was removed entirely and the AP was connected directly to pfSense. Which is hard to explain.
-
@stephenw10 said in pfSense 22.05 breaks VLANS, restoring pfSense 22.01 fixes the issue:
Yes if the switch is really tagging the traffic with VLAN0 it should fail using any NIC/driver in 22.05.
Though as I understand it we also saw that when the switch was removed entirely and the AP was connected directly to pfSense. Which is hard to explain.
Yes, that's correct, that was one of the test you asked me to do. The AP was connected directly to pfSense. That's why I don't know what to say, if it's the switch or not. If I understood it corectly @johnpoz has almost the same switch as mine and also the same AP ( Flex HD) and he did not encounter any issues. I don't know if he had a board that used ix driver. Other then that he has 2 of my possible ofending devices.
-
@nrgia yeah I had no issues with vlans, and a native vlan as well. Both with port qos and 802.1p.
Only difference is yeah my switch is a bit different, baby sister to your switch. And mine is downstream of another switch that could be stripping the vlan 0??
But if you said you plugged the AP directly into the interface on pfsense, that kind of rules out the switch.
This is a odd one for sure.. tmrw I could plug my AP directly into a port on pfsense, its just on a ix interface its a igb interface.
-
Mmm, because we also saws the vlan0 tags when we removed the access point and just used the switch.
That implies it's either not the AP or the switch or that it's both devices doing it. Which seems unlikely!
