[HOWTO] port forward rules for P2P emule :-)
-
Hi all :)
I wish to help other users to create correct rules for emule P2P program (the goal is obtain HIGH ID :-)
I tested these rules with 2.3.2 version of pfsense… good luck :-p"Default scenario":
MODEM <--> WAN [PFSENSE] <–> LAN0
WAN has address 192.168.200.2/30
LAN0 has address 192.168.1.200/24CLIENT1 has address 192.168.1.10/24
On CLIENT1 we have emule (emule uses 2 ports):
from emule menu --> options --> connection:
TCP is 10991
UDP is 7812you can change these port like you wish
Well, we need to create a new rule for port forward:
Firewall --> NAT --> Port Forward
Add
Interface: WAN
Protocol: TCP
Source: ANY
Destination: WAN address
Destination port range "OTHER" from port 10991 to "OTHER" port 10991
Redirect target IP: 192.168.1.10
Redirect target port "Other" 10991Save it!!! and do same thing with a new rule changing protocol (from TCP) to UDP and fill with 7812 port.
Cheers!!!
Don't remember to check firewall on CLIENT1 (if there's ;-)
Pol
-
Thanks
Get