Wireguard routing between tunnels

[nickologic]

Hi there,
I have successfully configured wireguard tunnels between two separate endpoints.

I have RDP (Remote Desktop) on one end, accessible via the PFsense LAN interface.

On another Wireguard tunnel, I am able to access the LAN resources, but not the resources on the other wireguard tunnel.

I cannot ping them. Seems to me like there is a routing issue.

Any suggestions?

[Jarhead]

@nickologic
Post pics.

[nickologic]

On Site 1 - Both endpoints connected via wireguard.

LAN - 198.136.186.0/24
Remote resources - 10.14.14.0/30 (on tun_wg2 )
Laptop - 10.13.13.2/30 (on tun_wg1)

Tun_wg1 is my Laptop. I can currently access Site 1's LAN.
Tun_wg2 is the remote resources I am trying to access.

I have a static route configured on Site1 to access the resources on Tun_wg2) (10.14.14.0/30)
I can successfully access these resources from Site1 LAN but not from tun_wg1 (my laptop)

On Laptop (tun_wg1) :

Firewall rules are set to allow all traffic for both wireguard tunnels

Here is my laptop configuration on TUN_wg1. I am able to access resources on SIte 1 LAN (198.136.186.0/24) but not

[Jarhead]

@nickologic Why are you using public IP's on you LAN?