Attempting to update to 23.01 DEVEL corrupts my pfSense installation

[stephenw10]

@opit-gmbh That looks like what you might see if the filesystem is full. Do you have a lot of ZFS snapshots on that box? Do you see any filesystem errors in the upgrade logs?

At the command line you can run bectl list to see how many snaps you might have. And bectl destroy xxxx to remove older snaps.

Steve

[OpIT GmbH]

@stephenw10

i dont know but i think not.... Its a7100 netgate

[stephenw10]

Hmm, OK. Not that then. Let me try to replicate it....

[stephenw10]

Ok, that looks like a bug: https://redmine.pfsense.org/issues/13831
Should be fixed in the next snap.

[stephenw10]

@opit-gmbh Do you have any of the upgrade logs from that? Any other errors shown?

The chances of hitting that bug we found are extremely low.

[Viper_Rus]

@stephenw10
Fixed the situation like this.

• I made a backup of the settings.
• Restored an older image (22.05),
• updated to the latest version of 23.01,
• restored setting from backup

[chickendog]

@viper_rus Is this what you were getting?

I'm not sure it's really an issue though since it seems to complete the checks fine in the end?

This is running the pfSense-upgrade -d as Stephen suggested.

[Viper_Rus]

@chickendog
I was getting this error in the WEB interface and the installation process was interrupted. Perhaps it was possible to fix it with the proposed option, I'll use it next time :))) But at the moment I have the last snapshot ;)

[chickendog]

@viper_rus Ah ok I see, yeah I have no error in the web interface but have it via CLI. I'll see if it persists. I assume for now I'm on the latest build and there just hasn't been a new one since 23.01.b.20230104.0600

[mikeisfly]

Upgrade completed successfully.

[mtarbox]

@stephenw10 all set. Cleared the .rrd file.
Reinstalled pfb-ng. Services now show.

Dynamic DNS is still wonky. Using the default which is http://checkip.dyndns.org. It does resolve to my address. Will wait and see what the next snap brings us.

[OpIT GmbH]

@stephenw10
where i can find this logs? and what can i do now to get my Netgate working ? ;)

[OpIT GmbH]

This post is deleted!

[chickendog]

@chickendog said in Attempting to update to 23.01 DEVEL corrupts my pfSense installation:

@viper_rus Ah ok I see, yeah I have no error in the web interface but have it via CLI. I'll see if it persists. I assume for now I'm on the latest build and there just hasn't been a new one since 23.01.b.20230104.0600

Confirming I've again upgraded successfully to 23.01.b.20230105.0600 from 23.01.b.20230104.0600. So looks like my pkg remote version errors are fixed - for now ;)

[Viper_Rus]

I also upgraded successfully to 23.01.b.20230105.0600 from 23.01.b.20230104.0600 in the web interface. And now there is not even a message that I do not have a plus license :)

Maybe someone will tell. For a long time now, when I load phsense, two lines appear

---

OpenVPN settings...done
route: route has not been found
route: route has not been found
Configuring firewall......done.

Can't find the reason for these errors

[michaellacroix]

Last night I was not able to upgrade a fresh install from 2.6.0 to plus. Kept getting package and cert errors. Can someone confirm if its an issue on my end or a netgate issue.
Thanks so much

[stephenw10]

Failed upgrading from 2.6 to 22.01? Nothing has changed there AFAIK. Testing...

[michaellacroix]

@stephenw10
Thanks for testing, hoping its just me...

[stephenw10]

Upgrades still working as expected for me here. No change since I last tested it. Which is as expected since nothing has changed there.

[michaellacroix]

@stephenw10

Thanks for testing for me. Tonight I'll try again. I'm going to do a fresh install of 2.6 to plus to dev.