PfBlockerng 3.1.0.9 error - does not save Custom DST Port alias

Tzvia

@bbcan177 said in PfBlockerng 3.1.0.9 error - does not save Custom DST Port alias:

curl -o /usr/local/www/pfblockerng/pfblockerng_category_edit.php "https://gist.githubusercontent.com/BBcan177/1a33c42d0a61f3ddd9c2f1b1d514ed83/raw"

Working here- input my port-alias and the setting stuck- and the REPORTS/ALERTS calmed down and I am only seeing inbound alerts on the ports listed in my alias.

cjbujold

That fixed the issue, Thanks

lsarakinos

Thank you @BBcan177
Patch fixed the problem

Bob.Dig

@bob-dig said in PfBlockerng 3.1.0.9 error - does not save Custom DST Port alias:

Today I also hit this. No port is saved and that is kinda problematic. I will have to turn off logging for that rule to not get flooded.

@BBcan177 Today I had the impression that rsync downloads don't work. I switched to auto and gave a regular http-address and the list got updated again. I don't know where the problem lies, could be up to them (uceprotect) and is not related to the topic about ports at all! Just to let you know... Rsync doesn't seem to be that necessary anyways.

BBcan177

@bob-dig what is the URL that you use for that feed?

Bob.Dig

@bbcan177
rsync-mirrors.uceprotect.net::RBLDNSD-ALL/dnsbl-1.uceprotect.net
rsync-mirrors.uceprotect.net::RBLDNSD-ALL/dnsbl-2.uceprotect.net

But with (auto) those did it:
http://wget-mirrors.uceprotect.net/rbldnsd-all/dnsbl-1.uceprotect.net.gz
http://wget-mirrors.uceprotect.net/rbldnsd-all/dnsbl-2.uceprotect.net.gz

This IP was buggen me: 195.133.40.188

BBcan177

@bob-dig said in PfBlockerng 3.1.0.9 error - does not save Custom DST Port alias:

rsync-mirrors.uceprotect.net::RBLDNSD-ALL/dnsbl-1.uceprotect.net
rsync-mirrors.uceprotect.net::RBLDNSD-ALL/dnsbl-2.uceprotect.net

They seem ok with my tests? Do you see any errors in the error.log? What happens when you ping rsync-mirrors.uceprotect.net?

Bob.Dig

@bbcan177 said in PfBlockerng 3.1.0.9 error - does not save Custom DST Port alias:

Do you see any errors in the error.log? What happens when you ping rsync-mirrors.uceprotect.net?

Sry, I don't even know where to look at what... I am a noob for the most part. I only know that it has worked before and, maybe, after the "patch" from here, rsync didn't worked anymore, presumably. Or it was just a coincidence.

bladezpro

Hey the patch fixed the issue port alias not saving for IPv4 but not for the GeoIP rules. Anyone have luck with that?

bladezpro

@bbcan177 Hey thanks for your efforts, any luck with the patch specific to saving port alias for Geo IP as well.