23.01 Squid issue

JonathanLee

If you reboot everything is fine and works, as soon as I try to change any configuration of squid that is when the errors occur.

Does anyone know how to fix this issue with 23.01 prior to this I could make squid configuration changes on the fly.

JonathanLee

@jonathanlee Should I open a ticket to do a full reinstall of 23.01 from a USB? or will this result in the same thing?

stephenw10

Are you using Squid Reverse? Is that what you were making changes to?

That line is:

	if (is_array($config['installedpackages']['squidreversegeneral']['config'])) {

Do you have that section in your config?

Steve

JonathanLee

@stephenw10 I just use Squid, this is when I save the general page for and this error occurs. It works but I cannot make any changes currently. I have Squid Reverse proxy disabled.

JonathanLee

@stephenw10

That section is blank, I can check the actual file hold on.

JonathanLee

@jonathanlee

stephenw10

Ok, go to the Reverse Squid setting page and save it without making any changes. That will create the reverse squid config section and you should then be able to make Squid changes.

JonathanLee

@stephenw10 That fixed it!!! thanks, TAC wants me to do a full reinstall of 23.01, I wonder if I have to do it now.

michmoor

@jonathanlee
@stephenw10 you are awesome !!

stephenw10

@jonathanlee said in 23.01 Squid issue:

I wonder if I have to do it now.

Probably not. That's an actual php bug, you would hit that on a clean install just the same.

JonathanLee

@stephenw10 I did a full fresh USB install with formatting the old firewall first and that error did not return. It was something that went wrong with the upgrade in place for me.

stephenw10

And you imported the config that didn't have an reverse squid tags present?

JonathanLee

@stephenw10 yes, this was done with a imported the config, again this was the config after the resave of the reverse proxy being disabled.

stephenw10

Ah, Ok that would have had the Reverse Squid tags in it then. So, yes, that's what I would expect.

Amenophisphp

@stephenw10 Thanks a lot

hugoeyng

@stephenw10 Hello.

I did as you said, but did not work.

Upgrading pfSense-pkg-squidGuard...
Updating pfSense-core repository catalogue...
pfSense-core repository is up to date.
Updating pfSense repository catalogue...
pfSense repository is up to date.
All repositories are up to date.
Checking integrity... done (0 conflicting)
The following 1 package(s) will be affected (of 0 checked):

Installed packages to be REINSTALLED:
pfSense-pkg-squidGuard-1.16.18_20 [pfSense]

Number of packages to be reinstalled: 1
[1/1] Reinstalling pfSense-pkg-squidGuard-1.16.18_20...
[1/1] Extracting pfSense-pkg-squidGuard-1.16.18_20: .......... done
Removing squidGuard components...
Menu items... done.
Services... done.
Loading package instructions...

Fatal error: Uncaught TypeError: Cannot access offset of type string on string in /usr/local/pkg/squidguard.inc:1193
Stack trace:
#0 /usr/local/pkg/squidguard.inc(1047): convert_pfxml_to_sgxml_time(Array)
#1 /usr/local/pkg/squidguard.inc(93): convert_pfxml_to_sgxml()
#2 /etc/inc/pkg-utils.inc(1068): require_once('/usr/local/pkg/...')
#3 /etc/rc.packages(80): delete_package_xml('squidGuard', 'deinstall')
#4 {main}
thrown in /usr/local/pkg/squidguard.inc on line 1193
PHP ERROR: Type: 1, File: /usr/local/pkg/squidguard.inc, Line: 1193, Message: Uncaught TypeError: Cannot access offset of type string on string in /usr/local/pkg/squidguard.inc:1193
Stack trace:
#0 /usr/local/pkg/squidguard.inc(1047): convert_pfxml_to_sgxml_time(Array)
#1 /usr/local/pkg/squidguard.inc(93): convert_pfxml_to_sgxml()
#2 /etc/inc/pkg-utils.inc(1068): require_once('/usr/local/pkg/...')
#3 /etc/rc.packages(80): delete_package_xml('squidGuard', 'deinstall')
#4 {main}
thrownpkg-static: DEINSTALL script failed
Saving updated package information...
overwrite!
Loading package configuration... done.
Configuring package components...
Loading package instructions...

Fatal error: Uncaught TypeError: Cannot access offset of type string on string in /usr/local/pkg/squidguard.inc:1193
Stack trace:
#0 /usr/local/pkg/squidguard.inc(1047): convert_pfxml_to_sgxml_time(Array)
#1 /usr/local/pkg/squidguard.inc(93): convert_pfxml_to_sgxml()
#2 /etc/inc/pkg-utils.inc(868): require_once('/usr/local/pkg/...')
#3 /etc/rc.packages(76): install_package_xml('squidGuard')
#4 {main}
thrown in /usr/local/pkg/squidguard.inc on line 1193
PHP ERROR: Type: 1, File: /usr/local/pkg/squidguard.inc, Line: 1193, Message: Uncaught TypeError: Cannot access offset of type string on string in /usr/local/pkg/squidguard.inc:1193
Stack trace:
#0 /usr/local/pkg/squidguard.inc(1047): convert_pfxml_to_sgxml_time(Array)
#1 /usr/local/pkg/squidguard.inc(93): convert_pfxml_to_sgxml()
#2 /etc/inc/pkg-utils.inc(868): require_once('/usr/local/pkg/...')
#3 /etc/rc.packages(76): install_package_xml('squidGuard')
#4 {main}
thrownpkg-static: POST-INSTALL script failed

Cleaning up cache... done.
Success

stephenw10

That's a different error. It's in Squidguard not squid: /usr/local/pkg/squidguard.inc:1193

I added the variation you're seeing to the open bug for this:
https://redmine.pfsense.org/issues/13978

Steve

psUser

@stephenw10
didnt help

Ive tried it today, but still the same error

PHP ERROR: Type: 1, File: /usr/local/pkg/squid_reverse.inc, Line: 414, Message: Uncaught TypeError: Cannot access offset of type string on string in /usr/local/pkg/squid_reverse.inc:414
Stack trace:
#0 /usr/local/pkg/squid.inc(751): squid_reverse_enabled()
#1 /usr/local/www/pkg_edit.php(137) : eval()'d code(1): squid_validate_general(Array, Array)
#2 /usr/local/www/pkg_edit.php(137): eval()
#3 {main}
thrown @ 2023-03-20 09:49:44

stephenw10

Did it create the reverse squid config section i your config file?

psUser

This post is deleted!