pfSense Plus Software Version 23.01 is Now Available for Upgrades
-
@steveits I've been using pfsense for more than 5 years and it's the first time I've encountered problems like this.
I recovered the Netgate 2100 with installation with ZFS. I did not succeed with UFS. Clearly, as you say, due to the small partition.
The following devices I will do as you said with the uninstallation of the packages.
Thank you very much! -
@mwatch what about a CE 2.7 release? Are there plans for a new release or will CE be phased out silently? In former times CE and plus arrived at the same time, until now i can't here anything about a new CE release ...
-
@saerdna https://redmine.pfsense.org/projects/pfsense/roadmap
-
@steveits thnaks for the link to the roadmap. The open bug reports have "Target Version: 2.7.0" and "Plus Target Version: 23.05", so the new CE 2.7.0 will be released with plus 23.05 in maybe 4-6 months?
-
@saerdna I was just trying to point out 2.7 still existed. re: target versions, they tend to show a version instead of "next" for open issues. Up until 23.01's release they were all 2.7 and 23.01. So I don't think one can assume 2.7 will be tied to any Plus version. Seems they are disconnected now. Per https://www.netgate.com/blog/pfsense-plus-pfsense-ce-dev-insights-direction "There will be CE releases after 2.6, but unlike Plus, they’ll be done when they’re ready, not on a regular cadence."
-
There is a certain irony here with this split between the CE version and the + version in that those paying for (via hardware) or opting for the + version end up being BETA testers for the upgrade process and the new version.
Those not opting for the plus version and so deliberately getting the upgrade delayed to their CE version, actually end up with the better experience!
Just seems a bizarre approach by Netgate.
-
@phil_d
Well, I had a strong allie this time : I could install/upgrade the new RC, and test drive it.
With the click of a button I could get back to 'stable (22.05 for me), thanks to ZFS.RC was ... event-less. It worked for me.
Btw : I have 2.6.0 at home.
I'm not in a rush to update that one.
2.7.0 will be fine. Or maybe a RC if that shows up first. -
@jarhead the upgrade that is presented in the GUI does not show 23.01 as an option. The only path currently is 22.01 and then move from there. However that isn’t really an option because of all of the changes made to the code base. For example I need support for the Intel 226i NIC which works fine in 27.0 but not 22.01.
-
@patryan said in pfSense Plus Software Version 23.01 is Now Available for Upgrades:
GUI does not show 23.01 as an option. The only path currently is 22.01 and then move from there.
So, you wind up in 22.01, and several minutes later in 23.01.
23.01 doesn't have 226i NIC support ?
Or 22.01 doesn't have 226 support, leaving your system in a state without NIC's ?Ask support for a copy of 23.01, and clean install - it's just a minute or so more work.
-
Can you really ask support for a pfsense plus installer for generic x86-64 hardware?
I thought the only options are factory images for Netgate hardware or install CE and upgrade to plus. I didn’t think fresh installing plus on generic hardware was possible.
-
@bradsm87 said in pfSense Plus Software Version 23.01 is Now Available for Upgrades:
I didn’t think fresh installing plus on generic hardware was possible.
If it is - I have missed that announcement, which I think would be a pretty big one.
-
@bradsm87 said in pfSense Plus Software Version 23.01 is Now Available for Upgrades:
Can you really ask support for a pfsense plus installer for generic x86-64 hardware?
No, one must upgrade from 2.6. Netgate doesn't have a download for Plus so one needs to request the image from TAC. Usually it takes only 15 minutes or so, they are pretty fast.
-
@steveits said in pfSense Plus Software Version 23.01 is Now Available for Upgrades:
Netgate doesn't have a download for Plus so one needs to request the image from TAC
Just to clarify - this would only be for netgate appliances - I am not aware of generic install for non netgate devices.
If your running say for example a netgatte 6100 or 5100 or like me an older 4860, then sure you can get image from TAC, and they are normally johnny on the spot in answering with a link to the download.
-
@johnpoz said in pfSense Plus Software Version 23.01 is Now Available for Upgrades:
this would only be for netgate appliances - I am not aware of generic install for non netgate devices.
That's what I was trying to say (by the "no"...), without enough coffee. Thanks. :)
Almost all of the Netgate hardware models have their own (re)install instructions at https://docs.netgate.com/pfsense/en/latest/solutions/ which is what their support will send with the image.
-
@steveits I get what you were saying - but just wanted to make it crystal clear ;) heheh
-
And now they have come up with the official solution for 1100 and 2100… politely I didn’t write this before, but I’m not surprised I guessed it… the gave the finger and woke reinstall from scratch is the only solution.
Looks like these are the advantages of official supported hardware! -
@fam said in pfSense Plus Software Version 23.01 is Now Available for Upgrades:
And now they have come up with the official solution for 1100 and 2100… politely I didn’t write this before, but I’m not surprised I guessed it… the gave the finger and woke reinstall from scratch is the only solution.
Looks like these are the advantages of official supported hardware!Pardon me but there is no fix for your system that has too-small a partition except re-imaging.
The engineers are still working on getting the script tested and verified so that if your system has too small a EFI partition the upgrade attempt stops so that it does not keep it from being bootable.
-
@rcoleman-netgate Q: will 1100/2100 that are not on 22.05, and can't upgrade to 23.01, be able to upgrade to 22.05? We have a few non-managed clients that had not yet upgraded to 22.05, and can only get to 23.01 via reinstall, which means an on-site visit.
-
@steveits They should but you want to make sure you set the right upgrade branch.
-
I am having issues upgrading my "System Netgate 1100" which below is the information of the system. Are there issues with the 1100 Netgate devices at this time?
Here is the error messages:
Updating repositories metadata...
Updating pfSense-core repository catalogue...
pkg-static: https://repo01.atx.netgate.com/pkg/pfSense_plus-v23_01_aarch64-core/meta.txz: Service Unavailable
repository pfSense-core has no meta file, using default settings
pkg-static: https://repo01.atx.netgate.com/pkg/pfSense_plus-v23_01_aarch64-core/packagesite.pkg: Service Unavailable
pkg-static: https://repo01.atx.netgate.com/pkg/pfSense_plus-v23_01_aarch64-core/packagesite.txz: Service Unavailable
Unable to update repository pfSense-core
Updating pfSense repository catalogue...
pkg-static: https://repo01.atx.netgate.com/pkg/pfSense_plus-v23_01_aarch64-pfSense_plus_v23_01/meta.txz: Service Unavailable
repository pfSense has no meta file, using default settings
pkg-static: https://repo01.atx.netgate.com/pkg/pfSense_plus-v23_01_aarch64-pfSense_plus_v23_01/packagesite.pkg: Service Unavailable
pkg-static: https://repo01.atx.netgate.com/pkg/pfSense_plus-v23_01_aarch64-pfSense_plus_v23_01/packagesite.txz: Service Unavailable
Unable to update repository pfSense
Error updating repositories!
Locking package pkg... done.
ERROR: Unable to compare version of pfSense-repo
BIOS Vendor: U-Boot
Version: 2018.03-devel-18.12.3-gc9aa92c-dirty
Release Date: Thu Oct 7 2021
Version 22.05-RELEASE (arm64)
built on Wed Jun 22 18:56:18 UTC 2022
FreeBSD 12.3-STABLEUnable to check for updates
CPU Type ARM Cortex-A53 r0p4
2 CPUs:
CPU 0: ARM Cortex-A53 r0p4 affinity: 0
CPU 1: ARM Cortex-A53 r0p4 affinity: 1
