Youtube content getting filtered on Squid
-
Now Testing with restrictions enabled
Header restrictions functional
Thank !!! this option now has the ability to be enabled and disabled.
-
@themaharshpatel I can confirm this is fixed as well for me. Thanks again !!
-
Redmine issue opened: https://redmine.pfsense.org/issues/13811
Thank you @JonathanLee and @michmoor for testing this. Now, let's hope that the PR gets merged soon! -
@themaharshpatel I hope your ticket gets some movement. Its an obvious coding flaw that truthfully...shouldve been picked up years ago but i suppose it shows how often the Squid package gets used by people. Do you know if theres a way to notify folks? Its still sitting there with no acknowledgement.
-
@michmoor said in Youtube content getting filtered on Squid:
@themaharshpatel I hope your ticket gets some movement. Its an obvious coding flaw that truthfully...shouldve been picked up years ago but i suppose it shows how often the Squid package gets used by people. Do you know if theres a way to notify folks? Its still sitting there with no acknowledgement.
There might be no acknowledgment due to holidays. And this is the first time I am opening an issue so I don't know about notifying the mods.
-
@themaharshpatel same issue with 23.05
-
@jonathanlee The redmine hasnt been actioned. The Git pull request hasnt been approved from what i can tell.
TBH, considering staff is extremely limited i doubt this will ever get resolved. I would instead see if you could pin this thread at the top. -
I have added a new pull
-
J JonathanLee referenced this topic on
-
@JonathanLee Coming back to this. Still no pickup from Netgate?
I am using Squid and I remembered this forum post :)Firewall: NetGate,Palo Alto-VM,Juniper SRX
Routing: Juniper, Arista, Cisco
Switching: Juniper, Arista, Cisco
Wireless: Unifi, Aruba IAP
JNCIP,CCNP Enterprise -
@michmoor Still waiting for a update on the 2nd pull request, I made another that was in PfSense packages to see if that gets traction
-
https://forum.netgate.com/topic/180588/pfsense-freebsd-ports-question
I have also added this to the development discussion area to attempt to get some traction.
-
@JonathanLee I am running into another issue with Squid. Curious if you can replicate it.
Using Unrestricted IPs section along with using Authetnication. No matter what IP or Network i place in the Unrestricted IPs section i am still prompted for Authentication. Its like that variable is not being passed through the config.Also this is unchecekd.
-
Ok i figured it out but its a tad confusing in the GUI.
There is this section under ACL. According to the Note adding your IP here should exempt users from being authenticated BUT this does not work.
Instead under the authentication tab there is a section that DOES work ane remove the ability for the IPs listed here to be authenticated.
Its confusing and the documentation is not clear on this point at all.
-
Came back to this post again for the youtube fix it's still present :) good times
-
It looks like this was merged today !!!
YEAH!!
https://github.com/pfsense/FreeBSD-ports/commit/bd93b039663782e42721656ed50653086e6118ba
Took a bit but it is now in there for 24.11, with Squid doing all sorts of updates I might get lucky and still have this package.
-
@JonathanLee Thats really great news, sorry was not following this since long (I switched from IT to Development). So to clean things up I will be closing PR and Redmine issue.
Best
Maharsh.