Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    [SOLVED] Since adding the new interface -> OpenVPN and WIreguard are working at half capacity

    Firewalling
    1
    4
    215
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • S
      SwissSteph
      last edited by SwissSteph

      OpenVPN et Wiregaurd fonctionnaient sans problèmes (accés interne et sur le WWW) avant mon ajout d'une interface "EMERGENCY"

      04db30ef-4f5d-4537-8fd3-8dd00168ab70-image.png

      since adding "EMERGENCY" OpenVPNet WIREGUARD connect without problems, but I can only launch the pfsense GUI and absolutely not go to the WWW.

      Here are my configurations :
      ac0ed153-e05b-4b9a-aeec-6346327db2e0-image.png

      fb9922cd-c6c1-4608-be62-af85d4ceacea-image.png

      72633dee-a8a6-4a29-b844-b2babea972f6-image.png

      4114cb9a-73a4-4347-a658-0692127afb2e-image.png

      15dfa390-a2f7-4d7d-9c7a-8251b3bd1f55-image.png

      With my "EMERGENCY" interface I can go to the Pfsesne GUI and go to the WWW

      I don't understand it anymore. I started from a configuration with OpenVPN and Wireguard OK and the simple addition of an interface breaks everything.

      Can you give me some advice?

      Thanks in advance for your ideas :-)

      I started with two "no-name" pfsense, one for use at home and the other as a backup in case of problems (which can happen when you're new to pfsense).
      ... And now I'm living with a Netgate 8200
      ... And sorry for my bad English...

      1 Reply Last reply Reply Quote 0
      • S
        SwissSteph
        last edited by SwissSteph

        A test with Wireguard, I can connect to my pfsense without any problem. But no link on the WWW works

        06619435-a801-4b31-82c7-58fc4bc68879-image.png

        2f56b643-f1f3-4f39-9718-d6ab7e965587-image.png

        c4e59c1d-89ac-4db3-844d-077162aae862-image.png

        I started with two "no-name" pfsense, one for use at home and the other as a backup in case of problems (which can happen when you're new to pfsense).
        ... And now I'm living with a Netgate 8200
        ... And sorry for my bad English...

        1 Reply Last reply Reply Quote 0
        • S
          SwissSteph
          last edited by

          I added the OpenVPN interface and rules, but same problem as with Wireguard

          68af078d-2a7a-4394-987d-22df8598034c-image.png

          I started with two "no-name" pfsense, one for use at home and the other as a backup in case of problems (which can happen when you're new to pfsense).
          ... And now I'm living with a Netgate 8200
          ... And sorry for my bad English...

          1 Reply Last reply Reply Quote 0
          • S
            SwissSteph
            last edited by

            Well, I've made a lot of progress ... now everything works except that OpenVPN and Wireguard don't take my DNS 9.9.9.9 configured in pfsense.

            I don't know where to force this setting for these two!

            Do you have any advice?

            I started with two "no-name" pfsense, one for use at home and the other as a backup in case of problems (which can happen when you're new to pfsense).
            ... And now I'm living with a Netgate 8200
            ... And sorry for my bad English...

            1 Reply Last reply Reply Quote 0
            • First post
              Last post