[SOLVED] Internal Web Service not show through captive portal
-
Hello,
Maybe the title is not so explanatory, but I'll try to do it below.
We have:
- pfsense as border firewall.
- pfsense virtualized with captive portal enabled.
In the border pfsense I have several VLANS, among them the VLAN300 which is for the servers.
-
In the VLAN300 we have the site of our institute.
-
In the VLAN300 we have our DNS that answers for our internal services.
NOTE: All our internal services have valid IP. -
The captiveportal WAN is a valid IP (of course :D) that is on the VLAN300.
-
The LAN is a private IP.
The rules for ports 53, 80, and 443 are allowed from the LAN out, otherwise they would not have access to external sites.
What happens:
When trying to access the site of the institute (internal service) using a device connected to our captiveportal, timed out error occurs. Any other site we access normal.
Any idea?
-
Well, at first I corrected the problem! What I did:
I added in the /boot/loader.conf entry,
hw.xen.disable_pv_nics = "1"
The interfaces are recognized as xn0 and xn1. When adding the entry above, they become as re0 and re1.
When restarting the server I had to assign the interfaces again.
I do not know if the correction was made by adding the input. I just know it worked.