Text with Code-tags displayed differently

Bob.Dig

When I change my own posting and saving it, "code" will be displayed differently and much favorably to me. Also I can hover over it and a copy shortcut is displayed.

Sadly when I reload the page again, it is all gone.

jimp

When you use the code block it defaults to a generic automatic lexer for syntax highlighting that isn't always accurate. You can override that by specifying the lexer to use immediately after the opening three backticks.

```config
blahblahblah
```

You can try different ones like shell, diff, php and other languages. If you want to strip the formatting and go plain you can use text as well.

I rarely rely on the automatic behavior since it often guesses wrong (especially for shell input/output prompts)

stephenw10

Testing....

Shell:

*** Welcome to pfSense 2.7.0-RELEASE (amd64) on t70 ***

 WAN (wan)       -> igb0       -> v4/DHCP4: 172.21.16.226/24
 LAN (lan)       -> igb1       -> v4: 192.168.226.1/24
 OPT1 (opt1)     -> igb2       -> v4: 10.112.20.1/26
 SWITCH (opt2)   -> igb3       -> v4: 192.168.70.1/25
 VLAN229 (opt3)  -> igb0.229   -> v4: 10.229.0.10/24
 VTI0 (opt9)     -> ipsec1     -> v4: 10.66.11.1/30
 OPT10 (opt10)   -> pppoe0     -> 
 VLAN50 (opt11)  -> igb1.50    -> v4: 10.10.50.10/26

 0) Logout (SSH only)                  9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart webConfigurator
 3) Reset webConfigurator password    12) PHP shell + pfSense tools
 4) Reset to factory defaults         13) Update from console
 5) Reboot system                     14) Disable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping host                         16) Restart PHP-FPM
 8) Shell

Enter an option: 
Connection to t70 closed.

Auto:

*** Welcome to pfSense 2.7.0-RELEASE (amd64) on t70 ***

 WAN (wan)       -> igb0       -> v4/DHCP4: 172.21.16.226/24
 LAN (lan)       -> igb1       -> v4: 192.168.226.1/24
 OPT1 (opt1)     -> igb2       -> v4: 10.112.20.1/26
 SWITCH (opt2)   -> igb3       -> v4: 192.168.70.1/25
 VLAN229 (opt3)  -> igb0.229   -> v4: 10.229.0.10/24
 VTI0 (opt9)     -> ipsec1     -> v4: 10.66.11.1/30
 OPT10 (opt10)   -> pppoe0     -> 
 VLAN50 (opt11)  -> igb1.50    -> v4: 10.10.50.10/26

 0) Logout (SSH only)                  9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart webConfigurator
 3) Reset webConfigurator password    12) PHP shell + pfSense tools
 4) Reset to factory defaults         13) Update from console
 5) Reboot system                     14) Disable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping host                         16) Restart PHP-FPM
 8) Shell

Enter an option: 
Connection to t70 closed.

stephenw10

No difference I can see. In both cases it shows the code box differently only on first viewing.

Edit: Huh, after posting that reply they initially show as expected. But then revert back after refreshing the page.

Bob.Dig

@stephenw10 said in Text with Code-tags displayed differently:

In both cases it shows the code box differently only on first viewing.

Right! So something could be optimized I guess. The "first" view is the best in my eyes.

jimp

Hmm, wonder what happens with others.

Diff:

diff --git a/src/etc/inc/openvpn.inc b/src/etc/inc/openvpn.inc
index 0281a094cb..1e63e3dfbf 100644
--- a/src/etc/inc/openvpn.inc
+++ b/src/etc/inc/openvpn.inc
@@ -899,7 +899,7 @@ function openvpn_reconfigure($mode, $settings) {
 	// OpenVPN defaults to SHA1, so use it when unset to maintain compatibility.
 	$digest = !empty($settings['digest']) ? $settings['digest'] : "SHA1";
 
-	$interface = get_failover_interface($settings['interface']);
+	$interface = $settings['interface'];
 	// The IP address in the settings can be an IPv4 or IPv6 address associated with the interface
 	$ipaddr = $settings['ipaddr'];

PHP:

require_once('guiconfig.inc');
require_once('functions.inc');
require_once('notices.inc');
require_once("pkg-utils.inc");

jimp

Not sure if it's related, but when I have the browser debug console open and bring up the editor where it shows, it has a log entry saying it's initializing highlight.js.

But when loading the page directly it hits a JS error:

Uncaught (in promise) TypeError: config.theme is undefined

And other processing seems to die there.

So it may be a NodeBB issue, though I'm not seeing any other hits on that error (other than someone here on the forum mentioning it back in June).

jimp

Looks like a NodeBB bug

https://github.com/NodeBB/NodeBB/issues/11708

There is already a fix committed so hopefully should be in whatever upgrade we do next.

stephenw10

Aha, nice find!