some services show can't start
-
The previous pfsense versions frr bgp will not interrupt bgp sessions due to the wiregaurd service status. I don’t know what code pfsense has changed.
-
Does
pkg update
always succeed or did we just happen to see it succeed previously?Its very odd that pkg update succeeds and repoc succeeds but pfSense-upgrade fails. And that it fails with an error that implies it cannot find the file. pkg update clearly was able to find it.
You should be seeing FRR 9 if you're on the latest beta build.
-
pkg update is ok. pfSense-upgrade not normal work.
i have using frr9. Since frr8- frr9 requires that the fe80:: address must be configured. so wiregaurd need add this fe80:: address.
How do I now change Pfsense's limit on wiregaurd service status errors? And how to cancel frr bgp sessions to establish a connection based on the wireguard service status?
The main problem now is that wiregaurd has connected to the tunnel normally, and pfsense mistakenly believes that wiregaurd is not working properly and stops the service. At the same time, frr bgp sessions also stop working.
i am using the version
23.09-BETA (amd64)
built on Fri Oct 13 14:00:00 CST 2023
FreeBSD 14.0-CURRENT -
Ok, as I stated previously, the service that pfSense is checking for is
php_wg
. So is that actually running? If it isn't is there an error logged when you try to start it? -
@stephenw10 said in some services show can't start:
Ok, as I stated previously, the service that pfSense is checking for is
php_wg
. So is that actually running? If it isn't is there an error logged when you try to start it?how i check the php_wg run? When I use webgui, I can sometimes start the wiregaurd service. But after a while, it will automatically show that the wiregaurd service is stopped. But in fact, wiregaurd is running normally.
-
-
Oct 15 03:35:24 check_reload_status 507 Syncing firewall Oct 15 03:35:24 php-fpm 78457 /pkg_edit.php: Configuration Change: Oct 15 03:32:00 sshguard 44701 Now monitoring attacks. Oct 15 03:32:00 sshguard 39046 Exiting on signal. Oct 15 03:25:11 xinetd 6828 Reconfigured: new=0 old=10 dropped=0 (services) Oct 15 03:25:11 xinetd 6828 readjusting service 19007-tcp Oct 15 03:25:11 xinetd 6828 readjusting service 19006-tcp Oct 15 03:25:11 xinetd 6828 readjusting service 19005-udp Oct 15 03:25:11 xinetd 6828 readjusting service 19005-tcp Oct 15 03:25:11 xinetd 6828 readjusting service 19004-udp Oct 15 03:25:11 xinetd 6828 readjusting service 19004-tcp Oct 15 03:25:11 xinetd 6828 readjusting service 19003-tcp Oct 15 03:25:11 xinetd 6828 readjusting service 19002-tcp Oct 15 03:25:11 xinetd 6828 readjusting service 19001-tcp Oct 15 03:25:11 xinetd 6828 readjusting service 19000-tcp Oct 15 03:25:11 xinetd 6828 Swapping defaults Oct 15 03:25:11 xinetd 6828 Starting reconfiguration Oct 15 03:24:53 php-fpm 91277 /rc.dyndns.update: phpDynDNS: Not updating wg A record because the public IP address cannot be determined. Oct 15 03:24:38 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/sbin/route -n6 get 'default' 2>/dev/null | /usr/bin/egrep 'flags: <.*PROTO.*>'' returned exit code '1', the output was '' Oct 15 03:24:38 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Default gateway setting frwg0 as default. Oct 15 03:24:37 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Applied package default settings as necessary. Oct 15 03:24:36 check_reload_status 507 Syncing firewall Oct 15 03:24:36 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed Unbound ACL group (WireGuard). Oct 15 03:24:36 check_reload_status 507 Syncing firewall Oct 15 03:24:36 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed Unbound ACL group (WireGuard). Oct 15 03:24:35 check_reload_status 507 Syncing firewall Oct 15 03:24:35 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed interface group (WireGuard). Oct 15 03:24:34 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed interface group (WireGuard). Oct 15 03:24:34 check_reload_status 507 Syncing firewall Oct 15 03:24:34 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed earlyshellcmd(s). Oct 15 03:24:34 check_reload_status 507 Syncing firewall Oct 15 03:24:33 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed earlyshellcmd(s). Oct 15 03:24:30 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Error starting gateway monitor for UKWG Oct 15 03:24:30 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/usr/local/bin/dpinger -S -r 0 -i UKWG -B 10.18.1.2 -p /var/run/dpinger_UKWG~10.18.1.2~10.18.1.1.pid -u /var/run/dpinger_UKWG~10.18.1.2~10.18.1.1.sock -C "/etc/rc.gateway_alarm" -d 1 -s 500 -l 2000 -t 60000 -A 1000 -D 600 -L 80 10.18.1.1 >/dev/null' returned exit code '1', the output was '' Oct 15 03:24:29 php-fpm 8018 /rc.filter_configure_sync: dpinger: No dpinger session running for gateway FRVPN_VPNV4 Oct 15 03:24:29 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/sbin/ifconfig tun_wg3 inet6 'fe80::32ed:b7ff:fe85:93d3' -alias' returned exit code '1', the output was 'ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address' Oct 15 03:24:28 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Applied package default settings as necessary. Oct 15 03:24:27 check_reload_status 507 Syncing firewall Oct 15 03:24:27 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed Unbound ACL group (WireGuard). Oct 15 03:24:27 check_reload_status 507 Syncing firewall Oct 15 03:24:27 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed Unbound ACL group (WireGuard). Oct 15 03:24:26 check_reload_status 507 Syncing firewall Oct 15 03:24:26 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed interface group (WireGuard). Oct 15 03:24:25 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed interface group (WireGuard). Oct 15 03:24:25 check_reload_status 507 Syncing firewall Oct 15 03:24:25 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed earlyshellcmd(s). Oct 15 03:24:25 check_reload_status 507 Syncing firewall Oct 15 03:24:24 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed earlyshellcmd(s). Oct 15 03:24:22 check_reload_status 507 Reloading filter Oct 15 03:24:22 check_reload_status 507 Restarting OpenVPN tunnels/interfaces Oct 15 03:24:22 check_reload_status 507 Restarting IPsec tunnels Oct 15 03:24:22 check_reload_status 507 updating dyndns WAN_PPPOE Oct 15 03:24:22 rc.gateway_alarm 74567 >>> Gateway alarm: WAN_PPPOE (Addr:10.1.8.1 Alarm:1 RTT:2.320ms RTTsd:.061ms Loss:33%) Oct 15 03:24:21 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Error starting gateway monitor for OPT7GW Oct 15 03:24:21 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/usr/local/bin/dpinger -S -r 0 -i OPT7GW -B 10.17.2.2 -p /var/run/dpinger_OPT7GW~10.17.2.2~10.17.2.1.pid -u /var/run/dpinger_OPT7GW~10.17.2.2~10.17.2.1.sock -C "/etc/rc.gateway_alarm" -d 1 -s 500 -l 2000 -t 60000 -A 1000 -D 600 -L 80 10.17.2.1 >/dev/null' returned exit code '1', the output was '' Oct 15 03:24:21 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/sbin/ifconfig tun_wg5 inet6 'fe80::f291:32ff:fe07:db47' -alias' returned exit code '1', the output was 'ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address' Oct 15 03:24:19 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Applied package default settings as necessary. Oct 15 03:24:19 check_reload_status 507 Syncing firewall Oct 15 03:24:18 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed Unbound ACL group (WireGuard). Oct 15 03:24:18 check_reload_status 507 Syncing firewall Oct 15 03:24:18 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed Unbound ACL group (WireGuard). Oct 15 03:24:17 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed interface group (WireGuard). Oct 15 03:24:17 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed interface group (WireGuard). Oct 15 03:24:17 check_reload_status 507 Syncing firewall Oct 15 03:24:16 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed earlyshellcmd(s). Oct 15 03:24:16 check_reload_status 507 Syncing firewall Oct 15 03:24:16 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed earlyshellcmd(s). Oct 15 03:24:13 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Error starting gateway monitor for DEwgGW Oct 15 03:24:13 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/usr/local/bin/dpinger -S -r 0 -i DEwgGW -B 10.11.0.2 -p /var/run/dpinger_DEwgGW~10.11.0.2~10.11.0.1.pid -u /var/run/dpinger_DEwgGW~10.11.0.2~10.11.0.1.sock -C "/etc/rc.gateway_alarm" -d 1 -s 500 -l 2000 -t 60000 -A 1000 -D 600 -L 80 10.11.0.1 >/dev/null' returned exit code '1', the output was '' Oct 15 03:24:13 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/sbin/ifconfig tun_wg4 inet6 'fe80::a9b3:3fff:febe:d75a' -alias' returned exit code '1', the output was 'ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address' Oct 15 03:24:11 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Applied package default settings as necessary.
-
Force pfsense to start wiregaurd, but it will stop automatically after a while
-
I would use:
[23.09-BETA][admin@6100-3.stevew.lan]/root: ps aux | grep php_wg root 24313 0.0 0.5 69316 44980 - Ss 21:45 0:00.03 php_wg: WireGuard service (php_wg) root 59822 0.0 0.0 12752 2364 0 S+ 21:46 0:00.00 grep php_wg
But it looks like you have an actual errors there.
It's unable to add the linklocal IPv6 address:
Oct 15 03:24:13 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/sbin/ifconfig tun_wg4 inet6 'fe80::a9b3:3fff:febe:d75a' -alias' returned exit code '1', the output was 'ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address'
So that likely explains the issues you were seeing with FRR.
But also:Oct 15 03:24:38 php_wg 22802 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/sbin/route -n6 get 'default' 2>/dev/null | /usr/bin/egrep 'flags: <.*PROTO.*>'' returned exit code '1', the output was ''
If you run
/sbin/route -n6 get 'default'
dircetly does it return a valid default route?Is that the last thing logged by the php_wg process before it stops?
Steve
-
I will provide you with the latest php_wg log that I can see. I have tried to delete all fe80: address settings, but the wg service still cannot be started.
Oct 15 12:41:33 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/sbin/route -n6 get 'default' 2>/dev/null | /usr/bin/egrep 'flags: <.*PROTO.*>'' returned exit code '1', the output was '' Oct 15 12:41:33 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Default gateway setting frwg0 as default. Oct 15 12:41:32 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Applied package default settings as necessary. Oct 15 12:41:31 check_reload_status 1217 Syncing firewall Oct 15 12:41:31 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed Unbound ACL group (WireGuard). Oct 15 12:41:30 check_reload_status 1217 Syncing firewall Oct 15 12:41:30 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed Unbound ACL group (WireGuard). Oct 15 12:41:30 check_reload_status 1217 Syncing firewall Oct 15 12:41:29 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed interface group (WireGuard). Oct 15 12:41:29 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed interface group (WireGuard). Oct 15 12:41:28 check_reload_status 1217 Syncing firewall Oct 15 12:41:28 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed earlyshellcmd(s). Oct 15 12:41:28 check_reload_status 1217 Syncing firewall Oct 15 12:41:28 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed earlyshellcmd(s). Oct 15 12:41:24 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Error starting gateway monitor for UKWG Oct 15 12:41:24 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/usr/local/bin/dpinger -S -r 0 -i UKWG -B 10.18.1.2 -p /var/run/dpinger_UKWG~10.18.1.2~10.18.1.1.pid -u /var/run/dpinger_UKWG~10.18.1.2~10.18.1.1.sock -C "/etc/rc.gateway_alarm" -d 1 -s 500 -l 2000 -t 60000 -A 1000 -D 600 -L 80 10.18.1.1 >/dev/null' returned exit code '1', the output was '' Oct 15 12:41:23 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/sbin/ifconfig tun_wg3 inet6 'fe80::32ed:b7ff:fe85:93d3' -alias' returned exit code '1', the output was 'ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address' Oct 15 12:41:21 check_reload_status 1217 Syncing firewall Oct 15 12:41:21 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Applied package default settings as necessary. Oct 15 12:41:20 check_reload_status 1217 Syncing firewall Oct 15 12:41:20 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed Unbound ACL group (WireGuard). Oct 15 12:41:20 check_reload_status 1217 Syncing firewall Oct 15 12:41:19 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed Unbound ACL group (WireGuard). Oct 15 12:41:18 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed interface group (WireGuard). Oct 15 12:41:18 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed interface group (WireGuard). Oct 15 12:41:17 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed earlyshellcmd(s). Oct 15 12:41:17 check_reload_status 1217 Syncing firewall Oct 15 12:41:17 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed earlyshellcmd(s). Oct 15 12:41:12 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Error starting gateway monitor for OPT7GW Oct 15 12:41:12 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/usr/local/bin/dpinger -S -r 0 -i OPT7GW -B 10.17.2.2 -p /var/run/dpinger_OPT7GW~10.17.2.2~10.17.2.1.pid -u /var/run/dpinger_OPT7GW~10.17.2.2~10.17.2.1.sock -C "/etc/rc.gateway_alarm" -d 1 -s 500 -l 2000 -t 60000 -A 1000 -D 600 -L 80 10.17.2.1 >/dev/null' returned exit code '1', the output was '' Oct 15 12:41:12 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/sbin/ifconfig tun_wg5 inet6 'fe80::f291:32ff:fe07:db47' -alias' returned exit code '1', the output was 'ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address' Oct 15 12:41:10 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Applied package default settings as necessary. Oct 15 12:41:10 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed Unbound ACL group (WireGuard). Oct 15 12:41:09 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed Unbound ACL group (WireGuard). Oct 15 12:41:08 check_reload_status 1217 Syncing firewall Oct 15 12:41:08 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed interface group (WireGuard). Oct 15 12:41:08 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed interface group (WireGuard). Oct 15 12:41:07 check_reload_status 1217 Syncing firewall Oct 15 12:41:07 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed earlyshellcmd(s). Oct 15 12:41:07 check_reload_status 1217 Syncing firewall Oct 15 12:41:07 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed earlyshellcmd(s). Oct 15 12:41:03 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Error starting gateway monitor for DEwgGW Oct 15 12:41:03 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/usr/local/bin/dpinger -S -r 0 -i DEwgGW -B 10.11.0.2 -p /var/run/dpinger_DEwgGW~10.11.0.2~10.11.0.1.pid -u /var/run/dpinger_DEwgGW~10.11.0.2~10.11.0.1.sock -C "/etc/rc.gateway_alarm" -d 1 -s 500 -l 2000 -t 60000 -A 1000 -D 600 -L 80 10.11.0.1 >/dev/null' returned exit code '1', the output was '' Oct 15 12:41:03 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/sbin/ifconfig tun_wg4 inet6 'fe80::a9b3:3fff:febe:d75a' -alias' returned exit code '1', the output was 'ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address' Oct 15 12:41:01 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Applied package default settings as necessary. Oct 15 12:41:00 check_reload_status 1217 Syncing firewall Oct 15 12:41:00 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed Unbound ACL group (WireGuard). Oct 15 12:41:00 check_reload_status 1217 Syncing firewall Oct 15 12:41:00 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed Unbound ACL group (WireGuard). Oct 15 12:40:59 check_reload_status 1217 Syncing firewall Oct 15 12:40:59 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed interface group (WireGuard). Oct 15 12:40:59 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed interface group (WireGuard). Oct 15 12:40:58 check_reload_status 1217 Syncing firewall Oct 15 12:40:58 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed earlyshellcmd(s). Oct 15 12:40:58 check_reload_status 1217 Syncing firewall Oct 15 12:40:58 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed earlyshellcmd(s). Oct 15 12:40:54 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Error starting gateway monitor for wg3GW Oct 15 12:40:54 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/usr/local/bin/dpinger -S -r 0 -i wg3GW -B 10.15.1.2 -p /var/run/dpinger_wg3GW~10.15.1.2~10.15.1.1.pid -u /var/run/dpinger_wg3GW~10.15.1.2~10.15.1.1.sock -C "/etc/rc.gateway_alarm" -d 1 -s 500 -l 2000 -t 60000 -A 1000 -D 600 -L 80 10.15.1.1 >/dev/null' returned exit code '1', the output was '' Oct 15 12:40:53 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/sbin/ifconfig tun_wg2 inet6 'fe80::a833:6fff:fe6c:4985' -alias' returned exit code '1', the output was 'ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address' Oct 15 12:40:52 check_reload_status 1217 Syncing firewall Oct 15 12:40:52 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Applied package default settings as necessary. Oct 15 12:40:51 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed Unbound ACL group (WireGuard). Oct 15 12:40:50 check_reload_status 1217 Syncing firewall Oct 15 12:40:50 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed Unbound ACL group (WireGuard). Oct 15 12:40:49 check_reload_status 1217 Syncing firewall Oct 15 12:40:49 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed interface group (WireGuard). Oct 15 12:40:49 check_reload_status 1217 Syncing firewall Oct 15 12:40:48 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed interface group (WireGuard). Oct 15 12:40:48 check_reload_status 1217 Syncing firewall Oct 15 12:40:47 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed earlyshellcmd(s). Oct 15 12:40:47 check_reload_status 1217 Syncing firewall Oct 15 12:40:47 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed earlyshellcmd(s). Oct 15 12:40:43 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Error starting gateway monitor for FMTv Oct 15 12:40:43 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/usr/local/bin/dpinger -S -r 0 -i FMTv -B 10.10.2.2 -p /var/run/dpinger_FMTv~10.10.2.2~10.10.2.1.pid -u /var/run/dpinger_FMTv~10.10.2.2~10.10.2.1.sock -C "/etc/rc.gateway_alarm" -d 1 -s 500 -l 2000 -t 60000 -A 1000 -D 600 -L 80 10.10.2.1 >/dev/null' returned exit code '1', the output was '' Oct 15 12:40:42 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/sbin/ifconfig tun_wg1 inet6 'fe80::32ed:b7ff:fe83:93d3' -alias' returned exit code '1', the output was 'ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address' Oct 15 12:40:41 check_reload_status 1217 Syncing firewall Oct 15 12:40:41 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Applied package default settings as necessary. Oct 15 12:40:40 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed Unbound ACL group (WireGuard). Oct 15 12:40:40 check_reload_status 1217 Syncing firewall Oct 15 12:40:39 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed Unbound ACL group (WireGuard). Oct 15 12:40:39 check_reload_status 1217 Syncing firewall Oct 15 12:40:38 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed interface group (WireGuard). Oct 15 12:40:38 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed interface group (WireGuard). Oct 15 12:40:37 check_reload_status 1217 Syncing firewall Oct 15 12:40:37 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed earlyshellcmd(s). Oct 15 12:40:37 check_reload_status 1217 Syncing firewall Oct 15 12:40:36 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed earlyshellcmd(s). Oct 15 12:40:31 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: The command '/sbin/ifconfig tun_wg0 inet6 'fe80::981f:60ff:fee9:56d3' -alias' returned exit code '1', the output was 'ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address' Oct 15 12:40:30 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Applied package default settings as necessary. Oct 15 12:40:29 check_reload_status 1217 Syncing firewall Oct 15 12:40:29 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed Unbound ACL group (WireGuard). Oct 15 12:40:28 check_reload_status 1217 Syncing firewall Oct 15 12:40:28 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed Unbound ACL group (WireGuard). Oct 15 12:40:27 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed interface group (WireGuard). Oct 15 12:40:27 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed interface group (WireGuard). Oct 15 12:40:27 check_reload_status 1217 Syncing firewall Oct 15 12:40:26 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed earlyshellcmd(s). Oct 15 12:40:26 check_reload_status 1217 Syncing firewall Oct 15 12:40:26 php_wg 46096 /usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed earlyshellcmd(s).
-
@stephenw10 said in some services show can't start:
/sbin/route -n6 get 'default'
[23.09-BETA][admin@]/root: /sbin/route -n6 get 'default' route: route has not been found: No error: 0 [23.09-BETA][admin@]/root:
i have upgrade pfsense to new version:
23.09-BETA (amd64)
built on Sun Oct 15 0:18:00 CST 2023
FreeBSD 14.0-CURRENT -
i can via ssh cli command add fe80 address, why pfsense can't add it?
/sbin/ifconfig tun_wg4 inet6 fe80::a9b3:3fff:febe:d75a tun_wg4: flags=10080c1<UP,RUNNING,NOARP,MULTICAST,LOWER_UP> metric 0 mtu 1350 description: DEwg options=80000<LINKSTATE> inet 10.11.0.2 netmask 0xffffff00 inet6 2602:fed:7022:b::11 prefixlen 127 inet6 fe80::a9b3:3fff:febe:d75a%tun_wg4 prefixlen 64 scopeid 0xc groups: wg WireGuard nd6 options=101<PERFORMNUD,NO_DAD>
-
One of the causes of the problem was found. When I manually added the fe80:: address to the wiregaurd interface using the command, frr bgp sessions resumed working. The reason was that the new version of pfsenese restricted the addition of fe80 addresses.
from frr8 start, must use linklocal IPv6 address for each interface.
-
-
@stephenw10 said in some services show can't start:
@stephenw10 said in some services show can't start:
Ok, that is a bug I can easily replicate that.
Changing the firewall gateway cannot take effect.
-
@yon-0 504 timeout.. The box has a load of 10 on it.. That for sure can not be normal - if it is this box is so undersized for what your wanting to do with it its pretty much useless..
-
@yon-0 said in some services show can't start:
i can via ssh cli command add fe80 address, why pfsense can't add it?
/sbin/ifconfig tun_wg4 inet6 fe80::a9b3:3fff:febe:d75a
Can you add it as an alias like the wg script tries to?
-alias
When there is no v6 IP on the interface already.
-
@johnpoz said in some services show can't start:
@yon-0 504 timeout.. The box has a load of 10 on it.. That for sure can not be normal - if it is this box is so undersized for what your wanting to do with it its pretty much useless..
It is a dedicated server ,with enough spare resources . opnsense running normal now, only pfsense timeout
-
@stephenw10 said in some services show can't start:
@yon-0 said in some services show can't start:
i can via ssh cli command add fe80 address, why pfsense can't add it?
/sbin/ifconfig tun_wg4 inet6 fe80::a9b3:3fff:febe:d75a
Can you add it as an alias like the wg script tries to?
-alias
When there is no v6 IP on the interface already.
your mean is add this?
-
No I mean like it shows in the logged error:
@yon-0 said in some services show can't start:
The command '/sbin/ifconfig tun_wg3 inet6 'fe80::32ed:b7ff:fe85:93d3' -alias' returned exit code '1'