Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    some services show can't start

    Scheduled Pinned Locked Moved Plus 23.09 Development Snapshots (Retired)
    131 Posts 5 Posters 28.7k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S
      stephenw10 Netgate Administrator
      last edited by

      Yes it's likely because that command is trying to remove an alias from the interface that doesn't exist?

      yon 0Y 1 Reply Last reply Reply Quote 0
      • yon 0Y
        yon 0 @stephenw10
        last edited by yon 0

        @stephenw10

        when wiregaurd restart, then wg interface was lost?

        I used the manually added fe80 address. When I restarted the wg service, the fe80 address disappeared.

        1 Reply Last reply Reply Quote 0
        • stephenw10S
          stephenw10 Netgate Administrator
          last edited by

          So, to be clear, how was this setup in 23.05.1? Assuming it worked as expected there?

          yon 0Y 1 Reply Last reply Reply Quote 0
          • yon 0Y
            yon 0 @stephenw10
            last edited by

            @stephenw10

            The settings are brought over from the 23.05 configuration.

            Maybe I found the reason why starting wg service cannot be displayed.

            when setup wiregaurd endpoint address use pfsense LAN gateway ipv6 address, then pfsense show can't start wiregaurd service.

            Could you try test this?

            1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              So you were adding the IPv6 LL addresses as IPAliases VIPs in 23.05.1 also?

              Is the LAN IPv6 address not valid?

              yon 0Y 1 Reply Last reply Reply Quote 0
              • yon 0Y
                yon 0 @stephenw10
                last edited by

                @stephenw10 said in some services show can't start:

                So you were adding the IPv6 LL addresses as IPAliases VIPs in 23.05.1 also?
                yes.

                Is the LAN IPv6 address not valid?
                when wireguard endpoint input Lan ip, then pfsense can't start wg service. but in fact wg is normal running.
                i have try deleted endpoint LAN ip, only use 127.0.0.1 ,then pfsense may start wg service.

                1 Reply Last reply Reply Quote 0
                • stephenw10S
                  stephenw10 Netgate Administrator
                  last edited by

                  Right but the LAN IPv6 address it's set to use is a valid address at the time WG tries to start?

                  yon 0Y 1 Reply Last reply Reply Quote 0
                  • yon 0Y
                    yon 0 @stephenw10
                    last edited by

                    @stephenw10 said in some services show can't start:

                    Right but the LAN IPv6 address it's set to use is a valid address at the time WG tries to start?

                    yes, it is public ipv6 valid address.

                    yon 0Y 1 Reply Last reply Reply Quote 0
                    • yon 0Y
                      yon 0 @yon 0
                      last edited by

                      use 127.0.0.1 wg endpoint address can't start service also now.

                      23.09-BETA (amd64)
                      built on Wed Oct 18 14:00:00 CST 2023
                      FreeBSD 14.0-CURRENT

                      Oct 18 22:05:57	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: The command '/sbin/route -n6 get 'default' 2>/dev/null | /usr/bin/egrep 'flags: <.*PROTO.*>'' returned exit code '1', the output was ''
                      Oct 18 22:05:57	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Default gateway setting frwg0 as default.
                      Oct 18 22:05:55	check_reload_status	1217	Syncing firewall
                      Oct 18 22:05:54	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Applied package default settings as necessary.
                      Oct 18 22:05:53	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed Unbound ACL group (WireGuard).
                      Oct 18 22:05:52	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed Unbound ACL group (WireGuard).
                      Oct 18 22:05:51	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed interface group (WireGuard).
                      Oct 18 22:05:50	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed interface group (WireGuard).
                      Oct 18 22:05:49	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed earlyshellcmd(s).
                      Oct 18 22:05:48	check_reload_status	1217	Syncing firewall
                      Oct 18 22:05:48	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed earlyshellcmd(s).
                      Oct 18 22:05:40	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Error starting gateway monitor for UKWG
                      Oct 18 22:05:40	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: The command '/usr/local/bin/dpinger -S -r 0 -i UKWG -B 10.18.1.2 -p /var/run/dpinger_UKWG~10.18.1.2~10.18.1.1.pid -u /var/run/dpinger_UKWG~10.18.1.2~10.18.1.1.sock -C "/etc/rc.gateway_alarm" -d 1 -s 500 -l 2000 -t 60000 -A 1000 -D 600 -L 80 10.18.1.1 >/dev/null' returned exit code '1', the output was ''
                      Oct 18 22:05:40	php-fpm	60021	/rc.filter_configure_sync: dpinger: No dpinger session running for gateway wg0GW
                      Oct 18 22:05:39	php-fpm	60021	/rc.filter_configure_sync: dpinger: No dpinger session running for gateway FMTZHU
                      Oct 18 22:05:39	php-fpm	60021	/rc.filter_configure_sync: dpinger: No dpinger session running for gateway DEwg
                      Oct 18 22:05:37	check_reload_status	1217	Syncing firewall
                      Oct 18 22:05:37	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Applied package default settings as necessary.
                      Oct 18 22:05:35	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed Unbound ACL group (WireGuard).
                      Oct 18 22:05:35	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed Unbound ACL group (WireGuard).
                      Oct 18 22:05:33	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed interface group (WireGuard).
                      Oct 18 22:05:33	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed interface group (WireGuard).
                      Oct 18 22:05:32	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed earlyshellcmd(s).
                      Oct 18 22:05:32	check_reload_status	1217	Syncing firewall
                      Oct 18 22:05:32	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed earlyshellcmd(s).
                      Oct 18 22:05:26	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Error starting gateway monitor for OPT7GW
                      Oct 18 22:05:26	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: The command '/usr/local/bin/dpinger -S -r 0 -i OPT7GW -B 10.17.2.2 -p /var/run/dpinger_OPT7GW~10.17.2.2~10.17.2.1.pid -u /var/run/dpinger_OPT7GW~10.17.2.2~10.17.2.1.sock -C "/etc/rc.gateway_alarm" -d 1 -s 500 -l 2000 -t 60000 -A 1000 -D 600 -L 80 10.17.2.1 >/dev/null' returned exit code '1', the output was ''
                      Oct 18 22:05:26	php-fpm	60021	/rc.filter_configure_sync: dpinger: No dpinger session running for gateway wg0GW
                      Oct 18 22:05:26	php-fpm	60021	/rc.filter_configure_sync: dpinger: No dpinger session running for gateway WAN_PPPOE
                      Oct 18 22:05:24	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Applied package default settings as necessary.
                      Oct 18 22:05:23	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed Unbound ACL group (WireGuard).
                      Oct 18 22:05:22	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed Unbound ACL group (WireGuard).
                      Oct 18 22:05:21	check_reload_status	1217	Syncing firewall
                      Oct 18 22:05:21	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed interface group (WireGuard).
                      Oct 18 22:05:21	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed interface group (WireGuard).
                      Oct 18 22:05:20	check_reload_status	1217	Syncing firewall
                      Oct 18 22:05:20	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed earlyshellcmd(s).
                      Oct 18 22:05:20	check_reload_status	1217	Syncing firewall
                      Oct 18 22:05:19	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed earlyshellcmd(s).
                      Oct 18 22:05:12	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Error starting gateway monitor for DEwgGW
                      Oct 18 22:05:12	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: The command '/usr/local/bin/dpinger -S -r 0 -i DEwgGW -B 10.11.0.2 -p /var/run/dpinger_DEwgGW~10.11.0.2~10.11.0.1.pid -u /var/run/dpinger_DEwgGW~10.11.0.2~10.11.0.1.sock -C "/etc/rc.gateway_alarm" -d 1 -s 500 -l 2000 -t 60000 -A 1000 -D 600 -L 80 10.11.0.1 >/dev/null' returned exit code '1', the output was ''
                      Oct 18 22:05:05	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Applied package default settings as necessary.
                      Oct 18 22:05:04	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed Unbound ACL group (WireGuard).
                      Oct 18 22:05:03	check_reload_status	1217	Syncing firewall
                      Oct 18 22:05:03	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed Unbound ACL group (WireGuard).
                      Oct 18 22:05:01	check_reload_status	1217	Syncing firewall
                      Oct 18 22:05:01	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed interface group (WireGuard).
                      Oct 18 22:05:00	check_reload_status	1217	Syncing firewall
                      Oct 18 22:04:59	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed interface group (WireGuard).
                      Oct 18 22:04:58	check_reload_status	1217	Syncing firewall
                      Oct 18 22:04:57	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] Installed earlyshellcmd(s).
                      Oct 18 22:04:57	check_reload_status	1217	Syncing firewall
                      Oct 18 22:04:57	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Configuration Change: (system): [pfSense-pkg-WireGuard] De-installed earlyshellcmd(s).
                      Oct 18 22:04:49	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: Error starting gateway monitor for wg3GW
                      Oct 18 22:04:49	php_wg	48848	/usr/local/pkg/wireguard/includes/wg_service.inc: The command '/usr/local/bin/dpinger -S -r 0 -i wg3GW -B 10.15.1.2 -p /var/run/dpinger_wg3GW~10.15.1.2~10.15.1.1.pid -u /var/run/dpinger_wg3GW~10.15.1.2~10.15.1.1.sock -C "/etc/rc.gateway_alarm" -d 1 -s 500 -l 2000 -t 60000 -A 1000 -D 600 -L 80 10.15.1.1 >/dev/null' returned exit code '1', the output was ''
                      Oct 18 22:04:48	php-fpm	60021	/rc.filter_configure_sync: dpinger: No dpinger session running for gateway wg3GW
                      Oct 18 22:04:48	php-fpm	60021	/rc.filter_configure_sync: dpinger: No dpinger session running for gateway wg0
                      Oct 18 22:04:48	php-fpm	60021	/rc.filter_configure_sync: dpinger: No dpinger session running for gateway wg0GW
                      
                      yon 0Y 1 Reply Last reply Reply Quote 0
                      • yon 0Y
                        yon 0 @yon 0
                        last edited by

                        Filter Reload
                        There were error(s) loading the rules: /tmp/rules.debug:198: syntax error - The line in question reads [198]: binat on pppoe2 inet from to any -> 10.1.7.12
                        @ 2023-10-24 00:11:20
                        There were error(s) loading the rules: /tmp/rules.debug:198: syntax error - The line in question reads [198]: binat on pppoe2 inet from to any -> 10.1.7.12
                        @ 2023-10-24 00:12:14
                        There were error(s) loading the rules: /tmp/rules.debug:198: syntax error - The line in question reads [198]: binat on pppoe2 inet from to any -> 10.1.7.12
                        @ 2023-10-24 00:13:08
                        There were error(s) loading the rules: /tmp/rules.debug:198: syntax error - The line in question reads [198]: binat on pppoe2 inet from to any -> 10.1.7.12

                        M 1 Reply Last reply Reply Quote 0
                        • stephenw10S
                          stephenw10 Netgate Administrator
                          last edited by

                          What address is that mapping supposed to be from?

                          yon 0Y 1 Reply Last reply Reply Quote 0
                          • yon 0Y
                            yon 0 @stephenw10
                            last edited by

                            @stephenw10

                            no setup Port Forward for pppoe2. I don't know where this comes from either.

                            1 Reply Last reply Reply Quote 0
                            • stephenw10S
                              stephenw10 Netgate Administrator
                              last edited by

                              It's a 1:1 NAT rule.

                              Do you have any 1:1 NAT rules? Perhaps the interface got switched out somehow.

                              1 Reply Last reply Reply Quote 0
                              • M
                                marcosm Netgate @yon 0
                                last edited by marcosm

                                @yon-0 said in some services show can't start:

                                Filter Reload
                                There were error(s) loading the rules: /tmp/rules.debug:198: syntax error - The line in question reads [198]: binat on pppoe2 inet from to any -> 10.1.7.12
                                @ 2023-10-24 00:11:20
                                There were error(s) loading the rules: /tmp/rules.debug:198: syntax error - The line in question reads [198]: binat on pppoe2 inet from to any -> 10.1.7.12
                                @ 2023-10-24 00:12:14
                                There were error(s) loading the rules: /tmp/rules.debug:198: syntax error - The line in question reads [198]: binat on pppoe2 inet from to any -> 10.1.7.12
                                @ 2023-10-24 00:13:08
                                There were error(s) loading the rules: /tmp/rules.debug:198: syntax error - The line in question reads [198]: binat on pppoe2 inet from to any -> 10.1.7.12

                                Thank you for reporting this. The fix should be in the next snapshot. See https://redmine.pfsense.org/issues/14918

                                If that fixes it for you, please let us know here or on the redmine report.

                                yon 0Y 2 Replies Last reply Reply Quote 0
                                • yon 0Y
                                  yon 0 @marcosm
                                  last edited by

                                  Services: Shellcmd

                                  I added 6 shellcmd configurations, but when the system restarts, the 5th-6th shellcmd configurations cannot be executed.

                                  554fac3a-c7af-4af4-b13a-dca0860e727b-image.png

                                  1 Reply Last reply Reply Quote 0
                                  • yon 0Y
                                    yon 0 @marcosm
                                    last edited by

                                    @marcosm said in some services show can't start:

                                    @yon-0 said in some services show can't start:

                                    Filter Reload
                                    There were error(s) loading the rules: /tmp/rules.debug:198: syntax error - The line in question reads [198]: binat on pppoe2 inet from to any -> 10.1.7.12
                                    @ 2023-10-24 00:11:20
                                    There were error(s) loading the rules: /tmp/rules.debug:198: syntax error - The line in question reads [198]: binat on pppoe2 inet from to any -> 10.1.7.12
                                    @ 2023-10-24 00:12:14
                                    There were error(s) loading the rules: /tmp/rules.debug:198: syntax error - The line in question reads [198]: binat on pppoe2 inet from to any -> 10.1.7.12
                                    @ 2023-10-24 00:13:08
                                    There were error(s) loading the rules: /tmp/rules.debug:198: syntax error - The line in question reads [198]: binat on pppoe2 inet from to any -> 10.1.7.12

                                    Thank you for reporting this. The fix should be in the next snapshot. See https://redmine.pfsense.org/issues/14918

                                    If that fixes it for you, please let us know here or on the redmine report.

                                    ok. Let me observe.

                                    yon 0Y 1 Reply Last reply Reply Quote 0
                                    • yon 0Y
                                      yon 0 @yon 0
                                      last edited by

                                      System startup can't be completed in this version, but it does not affect the use of webgui.

                                      23.09-BETA (amd64)
                                      built on Tue Oct 24 1:01:00 CST 2023
                                      FreeBSD 14.0-CURRENT

                                      882ba54c-6478-4812-bea3-3f1c823146fa-image.png

                                      yon 0Y 2 Replies Last reply Reply Quote 0
                                      • yon 0Y
                                        yon 0 @yon 0
                                        last edited by

                                        23.09-BETA (amd64)
                                        built on Tue Oct 24 1:01:00 CST 2023
                                        FreeBSD 14.0-CURRENT

                                        Unable to route over WAN

                                        73bdc247-59e8-437b-88d2-a8dda088d4ae-image.png

                                        1 Reply Last reply Reply Quote 0
                                        • yon 0Y
                                          yon 0 @yon 0
                                          last edited by yon 0

                                          firewall bug

                                          When I change the firewall to go out from the designated gateway, the firewall does not actually take effect.

                                          eg: LAN via vpn route out, but some 10.50.2.50 via WAN, the via wan can't work.

                                          The reload page always gets stuck
                                          44c19ea0-a000-4865-a2a6-3accc2c0c629-image.png

                                          1 Reply Last reply Reply Quote 0
                                          • stephenw10S
                                            stephenw10 Netgate Administrator
                                            last edited by

                                            What happens if you try to reload it at the CLI:
                                            pfctl -v -f /tmp/rules.debug

                                            If it's gets stuck where does it stick?

                                            yon 0Y 2 Replies Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.