PFSense 6100 blocking traffic to LAN from VLAN (PBX)

frog

I have a 6100 and have setup a VLAN80 called PBX on the LAN igc0. I had some config issues and deleted it trying to figure out why there was not internet for that interface, things weren't working. I then deleted the PBX Vlan in vlan and assignments. Then recreated it and now the PBX vlan works to the internet and the firewall ports are working, but it is not allowing packets to the default lan
pbx lan is 192.168.80.x/24
LAn lan 192.168.85.x/24

pbx fw rules.png

lan fw rules.png

fw block.png

viragomann

@frog
Seems to be an asymmetric routing issue. The blocks are SYN-Ack packets. So presumably the SYN didn't pass pfSense.

I'd suspect that there is a layer 2 leak outside of pfSense (switch).

frog

@viragomann great shout. Thanks for that. I had left an ip address entry on the layer 3 switch for the vlan. So would send the packets to the gateway.

Many thanks
Chris