Limitadores Fantasmas

[Onelove2323]

I have pfsense 2.6.0 installed, everything is perfect. Maybe I wanted to change the model of the traffic shaper limiters, eliminating all the ones I had created and starting that part from scratch. When I create a new limiter and add it to the firewall rule, the connection is lost. When I reviewed the information in limiter info I noticed that the limiters I removed continue to run limiting with this 0.0.0.0/0 which means everything

I already restarted pfsense and it's still the same

where is the file to config limiters (Edit file GUI)

[johnpoz]

@Onelove2323 so your wanting to know how to clear your limiters? That your saying the gui is not showing?

I would do a download of your config, you can select just the limiters section - what is in there?

Example here is snip of mine I just downloaded

[Onelove2323]

this is my config.xml

section dnshaper

<dns_server2>1.1.1.1</dns_server2>
<dns_server3>8.8.8.8</dns_server3>
<dns_server4>200.44.32.12</dns_server4>
<netbios_enable>yes</netbios_enable>
<netbios_ntype>0</netbios_ntype>
<netbios_scope></netbios_scope>
<nbdd_server1></nbdd_server1>
</openvpn-csc>
</openvpn>
<dnshaper></dnshaper>
<unbound>
<enable></enable>
<dnssec></dnssec>
<active_interface></active_interface>
<outgoing_interface></outgoing_interface>
<custom_options></custom_options>
<hideidentity></hideidentity>
<hideversion></hideversion>
<dnssecstripped></dnssecstripped>
</unbound>
<vlans>
<vlan>
<if>bce3</if>

[johnpoz]

@Onelove2323 said in Limitadores Fantasmas:

<dnshaper></dnshaper>

well then there are no limiters... Did you reboot pfsense?

[Onelove2323]

@johnpoz I already found the problem, you cannot have limitsdores and captive portral at the same time in pfsense 2.6.0. Is there a solution?

[stephenw10]

You can.

You can also add Limiter pipes in the captive portal config which it looks like you may have done ince they still appear.

[Onelove2323]

@stephenw10 quiero usar los limitadores de traffic shaper pero al utilizar activar el portal cautivo en cualquier interfaz de jan de funcionar los limitadores de traffic shaper fpsense 2.6.0 comunity edition que solucion hay

[stephenw10]

Hmm Google Translate isn't really helping here!

What exactly is failing here?

Do you have Limiters set in the Captive Portal? It looks like you so since limiter info still shows them present.