OpenVPN Server / Dual Stack
-
Hey folks,
I am having a mixed client pool of ipv6 and ipv4 so I want openvpn to listen on 6&4. According to https://serverfault.com/questions/651832/openvpn-with-mixed-ipv4-and-ipv6-clients selecting UDP6 will make openvpn bind in Dual-Stack mode, but:
# sockstat -64 | grep 1194 root openvpn 92011 6 udp6 fe:fake::2:1194 *:*
I can see that /var/etc/openvpn/server1.conf employes the local directive that binds the server to a ip. The value changes whether it's udp6 or 4. While writing this I noticed that this value vanished if you do not supply an interface to bind to.
Even with interface set to "any" it will only listen on either udp4 or 6.How to get openvpn to correctly server ipv4 and ipv6 clients?
Cheers,
-Chris. -
That response on serverfault is incorrect. udp6 is IPv6 only.
You can't do dual stack until OpenVPN 2.4, which is in pfSense 2.4 snapshots. To use it there, you need to use one of the options labeled "IPv4 and IPv6 on all interfaces (multihome)", there is one for UDP and one for TCP.
It can't be dual stack currently without binding to all interfaces, and the multihome keyword lets it properly source replies based on how the packets arrived.
-
^ that being said jim it doesn't seem to export the ipv6 IP addresses in the client export.
I just tried to fire that up, and when I do the export it only lists the ipv4 address. I have to do more testing because I normally just have my HE tunnel up for ipv6 and don't have ipv6 on my normal isp wan.
But the way I read that "all interfaces" it would list my IP address of my tunnel interface?
To the OP - why can you not just fire up an other instance? One udp4 and the other upd6 - this is what I currently do. Partly because not really dual stack since like I said my IPv6 is on my HE tunnel interface. But be happy to try the ipv4 and ipv6 mode.. And get the isp ipv6 working on my wan.. Just enabling it didn't seem to grab a IPv6 on the wan - but to be honest the comcast ipv6 in my area is flaky at best. This is why I run a HE tunnel ;)
-
multihome isn't going to work well with anything automatic in the export package. You'll have to set the remote addresses yourself or go by hostname not IP address.
There is no way for it to accurately list everything you want in there without maybe listing something you don't.
-
^ valid point ;)
I will test when I get a chance.
It does put in the IPv6 for sure when running udp6 on my HE.. and I pick interface address.
I was hoping when I pick the udp4 and 6 option and in the openvpn setup it still lists wan as the interface it would list out the ipv4 and ipv6 address on my wan interface vs all of them.. But you make a good point. Prob want to note something like that in the export client.
-
The best thing to do there is to make your own DNS record with both A and AAAA responses and set that as what clients use to connect.
-
Agreed that would be the best option to be sure!