Pfsense Date & Time
-
No this thing is not work in my work. I can try with power off & on as well as reboot option.
Did anyone have solution for same??? -
Ok, so it didn't work. What steps did you take to check that it didn't work? Have you checked the date/time in the BIOS at startup? Have you checked that the correct timezone is set as suggested by ishtiaqaj? For that matter, what date/time are you getting? Is it the correct date but out of sync by a few hours? Or is it set to something like 1990? The latter would suggest a CMOS battery issue.
-
Ok, so it didn't work. What steps did you take to check that it didn't work? Have you checked the date/time in the BIOS at startup? Have you checked that the correct timezone is set as suggested by ishtiaqaj? For that matter, what date/time are you getting? Is it the correct date but out of sync by a few hours? Or is it set to something like 1990? The latter would suggest a CMOS battery issue.
Steps -: General Setup -> Timezone -> Choose timezone then reboot or power off or on the pfsense.
No i'm not getting correct date it show me old date & time Fri Jan 1 4:10:52 UTC 2010, Their is no CMOS battery issue. -
@ashi_220:
No i'm not getting correct date it show me old date & time Fri Jan 1 4:10:52 UTC 2010, Their is no CMOS battery issue.
Your time is over six years out. I repeat, have you checked the date/time in your system BIOS at bootup?
-
@ashi_220:
No i'm not getting correct date it show me old date & time Fri Jan 1 4:10:52 UTC 2010, Their is no CMOS battery issue.
Your time is over six years out. I repeat, have you checked the date/time in your system BIOS at bootup?
Yeah, Now it is changed & show me current date & time. I change Date/time in BIOS settings.
But one thing that how it is changed & getting six year old date/time when i was not change any date/time settings??Thank u very much :)
-
Configure a NTP server under System>General Setup.
-
@ashi_220:
how it is changed & getting six year old date/time when i was not change any date/time settings??
My guess is that your CMOS battery may be running low generally, though maybe not enough to bomb out completely. Might be worth replacing it in the long run, and also do what cmb suggests and set an NTP server in your settings.
-
-
@ashi_220:
how it is changed & getting six year old date/time when i was not change any date/time settings??
My guess is that your CMOS battery may be running low generally, though maybe not enough to bomb out completely. Might be worth replacing it in the long run, and also do what cmb suggests and set an NTP server in your settings.
I think their may be issue of CMOS battery. I had already configure NTP server.
-
S Samuel BF referenced this topic on
-
@Iahmad
I have the same issue. My BIOS time is correct.
Is there anyway I can set time by command prompt. -
@Cleetus-Antony said in Pfsense Date & Time:
I have the same issue. My BIOS time is correct.
Is your BIOS time UTC or local?
Linux/FreeBSD requires it to be UTC time
Then make sure to configure the correct timezone for your location.
-
And why wouldn't the pfSense build in NTP client work for you ?
Or isn't your pfSense connected to the Internet ? -
@Gertjan PFSENSE connected to internet and everything is working. Clients r getting internet thru pfsense. When I want to create rules with scheduler, due to time wrong time, the rule doesnt work as indented for clients. Any clue ?
-
@elvisimprsntr
I set the correct time zone in pfsense. Date is correct. but the time is few hours difference. Looks like the time in BIOS is local. there is no option I can see in BIOS to change to UTC. What am I missing ? -
This post is deleted! -
simply set the BIOS time to UTC HH:MM:SS
https://www.timeanddate.com/worldclock/timezone/utc
-
@elvisimprsntr
Time in BIOS is correct and its in UTC format. Still I installed new battery in motherboard.
But even after setting correct time zone in pfsense, time is 7 Hours ahead. -
- GUI: stop NTP service
- CLI: ntpdate time.nist.gov
- GUI: restart NTP service
-
This post is deleted! -
Did the same. I got below msg on output.
Still the time is wrong.. Now 4 Hours 30 min difference.14 Jun 19:03:04 ntpdate[63408]: the NTP socket is in use, exiting
