nvme0n1 Unknown

tedquade

24.08-DEVELOPMENT (amd64)
built on Mon Jun 24 0:00:00 CST 2024
FreeBSD 15.0-CURRENT

6100 MAX

S.M.A.R.T. Status shows nvme0n1 as Unknown

Ted

DefenderLLC

@tedquade I was just about to install it on my 6100 MAX. Perhaps I'll wait. :)

stephenw10

Testing....

stephenw10

Works OK here:

[24.08-DEVELOPMENT][root@6100-3.stevew.lan]/root: smartctl -a /dev/nvme0
smartctl 7.4 2023-08-01 r5530 [FreeBSD 15.0-CURRENT amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       M.2 (P80) 3TE6
Serial Number:                      BCA12107210770235
Firmware Version:                   V20B09
PCI Vendor/Subsystem ID:            0x1bc0
IEEE OUI Identifier:                0x24693e
Controller ID:                      0
NVMe Version:                       1.3
Number of Namespaces:               1
Namespace 1 Size/Capacity:          120,034,123,776 [120 GB]
Namespace 1 Formatted LBA Size:     512
Namespace 1 IEEE EUI-64:            24693e 78490bc0bb
Local Time is:                      Tue Jun 25 19:43:54 2024 BST
Firmware Updates (0x02):            1 Slot
Optional Admin Commands (0x0006):   Format Frmw_DL
Optional NVM Commands (0x000f):     Comp Wr_Unc DS_Mngmt Wr_Zero
Log Page Attributes (0x03):         S/H_per_NS Cmd_Eff_Lg
Maximum Data Transfer Size:         256 Pages
Warning  Comp. Temp. Threshold:     70 Celsius
Critical Comp. Temp. Threshold:     85 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     6.50W       -        -    0  0  0  0        5       5
 1 +     5.80W       -        -    1  1  1  1       30      30
 2 +     3.60W       -        -    2  2  2  2      100     100
 3 -   0.0500W       -        -    3  3  3  3     5000   10000
 4 -   0.0025W       -        -    4  4  4  4     5000   45000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning:                   0x00
Temperature:                        45 Celsius
Available Spare:                    100%
Available Spare Threshold:          1%
Percentage Used:                    0%
Data Units Read:                    102,556 [52.5 GB]
Data Units Written:                 933,057 [477 GB]
Host Read Commands:                 1,461,531
Host Write Commands:                46,027,016
Controller Busy Time:               27
Power Cycles:                       201
Power On Hours:                     3,656
Unsafe Shutdowns:                   137
Media and Data Integrity Errors:    0
Error Information Log Entries:      27
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0
Temperature Sensor 1:               66 Celsius
Temperature Sensor 2:               45 Celsius
Temperature Sensor 3:               45 Celsius
Temperature Sensor 4:               46 Celsius
Thermal Temp. 1 Transition Count:   2
Thermal Temp. 1 Total Time:         157498

Error Information (NVMe Log 0x01, 16 of 64 entries)
No Errors Logged

Self-tests not supported

What exactly are you seeing?

stephenw10

Oh in the widget?

Screenshot from 2024-06-25 19-46-32.png

tedquade

@stephenw10 In the widget Yes.
Ted

stephenw10

Ok looks like the way the drive devices are presented has changed slightly. nvme0n1 doesn't exist in 24.03. Digging.

DefenderLLC

@stephenw10 In that case, I'll roll the dice after hours. :)

stephenw10

Mmm, digging into what changed but it doesn't appear to be anything more than cosmetic. You can just exclude it from the widget manually for now.

DefenderLLC

@stephenw10 The ZFS widget is broken like it was when 24.03 was first being tested. Everything else is good so far!

stephenw10

Hmm, that was broken in earlier snaps but should be fixed now.

Check /usr/local/pfSense/include/Netgate/Services/ZFS/LibZFS.php line 109 should be:

				zfsState = zfs.asdict()

Assuming you do have ZFS pools on that system.

DefenderLLC

@stephenw10 Yeah, it's there. It's not a big deal. Everything else is working fine. Thanks.

			try:
				zfs = libzfs.ZFS()
				zfsState = zfs.asdict()
				jsonOutput = json.dumps(zfsState, default=str)
			except Exception:

stephenw10

Hmm and zpool status returns the correct values?

DefenderLLC

@stephenw10 Yes sir.

stephenw10

Does it appear if you refresh the dashboard a few times? The values used there are cached.

DefenderLLC

@stephenw10 Yes I have including a manual reboot (post-upgrade). I'm really not worried about it. Just thought you might want to know. Thanks.

stephenw10

Hmm, curious. Yes, that should be working .

stephenw10

Try clearing the cache with: rm -rf /tmp/symfony-cache

DefenderLLC

@stephenw10 No change - even with an incognito window or logging in from another device. I remember this came up exactly the same way during the early 24.03 development cycle, so let me scroll back through some of the older threads to see what you suggested before to fix it. Thanks.

stephenw10

Yeah it came up during early 24.08 testing internally because of a change to the python zfs library, but that should be fixed.