Routing between two OpenVPN servers
-
Hello Routing Gurus
I have setup the following network
Server A is a remote client to site mode
Server B is a site to site mode
Server A and server B are sitting on the same pfsense instance
Everithing work fine expect when RoadWarrior connected to server A try to go to go the pfsense client machine
A simple ping 192.168.2.1 from RoadWarrior just time out.
I understand tha some routing between Server A and B must be put in place.
Some advise on how to setup that routing will be very usefull.
Thanks for helping
Pierre -
@PierreFrench
In the sever A settings you have to add 192.168.2.0/24 to the local networks to push the route to the clients.At the remote site you have to add the road warrior tunnel network 10.0.20.0/24 to the remote networks.
-
Thanks for the reply
I have tried that before but it doesn't work
I fact it's even more one way, I only need to have RoadWarrior acces PfsenseRmote and not vice versa -
@PierreFrench
It presumed, that connection between the main and the remote site are already working.Can you post all the OpenVPN configs and the routing tables of main and remote to get some insight, please?
Consider that the used local network ranges could be problematical if a road warrior client has the same, as they are often used as default on consumer routers.
-
Thanks for the advise
I will double check and redo the config
