TNSR Feature Request and Bug Reporting
-
Hi,
Would like to see DHCP Relay (unless I missed it in the documentation).
Would also like to be able to add "description" to static DHCP leases which are configured.Keep up the good work !
Thanks :)
-
@matlear +1 for DHCP Relay. I want to be able to setup a single DHCP server for all my subnets.
While I could (afaik) setup a relay agent for every subnet with Windows RAS, that would be wasted resources, especially when we are talking 10+ subnets. -
My wishlist - for router visibility via SNMP + syslog
- SNMP FRR integration for BGP stats / states
- SNMP interface ifAlias sourced from interface descriptions
- SNMP disk usage - so I can setup alerting rules at >90% usage in case logging is misconfigured and uses up all the disk space
- Easier Syslog configuration - it looks like I have to edit rsyslog.conf to enable syslogging.
On Cisco it's just "logging host 10.99.99.99", so it's quite a bit more work on TNSR.
The critical messages are BGP peer changes and interface up/down notifications
-
@jdoodle Thank you for your feedback! I sent you a message to ask a couple of questions.
-
A couple of suggestions for future release
-
CLI: Add support for showing the full current "active" configuration node name as part of the config mode prompt. example tnsr tnsr(config-ospf-if GigabitEthernet0/3/4)#
-
CLI: Add support for showing settings of the current active configuration node. Currently running show in a subbranch of the configuration tree returns unknown command rather than showing setting in that branch of the tree.
-
Add support for interface names rather than only ip addresses in settings where ip address might be assigned by dhcp. like tnsr(config-wireguard)# source-address <ip-addr> or tnsr(config-unbound)# [no] outgoing-interface <ip-address>
-
-
I'd like multicast implemented (i.e. PIM). I'd like to be able to create a rendezvous point and enable pim sparse mode to process multicast traffic amongst multiple sub interfaces. PIM BSR would be even better.
I'm also waiting for a dhcp relay functionality that allows me to forward dhcp requests to a specific dhcp server instead of relying on a L3 switch for this functionality.
-
I request to implement a | (pipe) in the CLI so it's possible to show only specific information.
For example, if you do "show nat sessions" it should be nice to have the option "show nat sessions | match 10.0.0.1" to show only the entries matching 10.0.0.1.
match could also be grep or include. -
This post is deleted! -
@patrickv this feature introduced in 23.11.
-
@matlear DHCP relay is coming in 24.10.