pfSense Plus Software Version 24.11 is here!
-
Upgraded a SG-4100 successfully, no problems what so ever.
Thanks Netgate team.
-
Upgraded a 2100 and 8200, so far so good.
-
Updated my 5100, all went smoothly. All pkgs restarted. I'm still on dhcp ISC so I guess I'll have to bite the bullet and upgrade that.
-
I was wondering how much did change from 24.11-RC?
Since I'm a few thousand kilometers away from the pfSense router and only back in April, it be a shame to loose it right now (especially my WG route to home) :).
Is there a way to know what changed between RC and release, the release notes are - I think - pretty much the same.
-
Installed on SG-6100 went OK. The only issue I see at this time is that the dashboard System Services Status widget is showing Wireguard as down.
I have checked the Wireguard connection and it looks OK, it is connected. I have tried a reboot (also tried a cold start) and no change. I have tried starting Wireguard from the widget play button. So it looks like the widget has an issue, not wireguard itself.
Cheers
Steve
-
@FollyDude-0 Coming from RC, also had this once and before that a problem with unbound. After disabling the RAM-Disk and a third reboot, no problem so far. Probably a good idea to disable the RAM-Disk (and my specific settings with it) in the first place before the upgrade.
-
Install and restart at my 4100 worked.
But Squid and SquidGuard services do not start. Starting button at UI also does not work.
Anybody else with this problem ?
-
Upgraded a 6100 without issues - it also upgraded/reinstalled all packages without errors (pfBlockerNG, FreeRadius, TFTP, LLDPD.
Going to try out KEA DHCP now.....
-
@keyser said in pfSense Plus Software Version 24.11 is here!:
Going to try out KEA DHCP now.....
The switch to KEA DHCP has so far introduced no issues other than it starts handing new leases out (with no prior lease on record) - meaning clients will change their IP address at next renewal.
I dunno if it will cause IP conflicts down the line with new clients getting IPs from still working ISC leases belonging to continuously active clients.But it upgraded with all settings kept - including static leases.
I enabled Dynamic DNS and Early Dynamic DNS registration. Seems to works quite flawless this far :-)
-
@keyser I seem to no longer be able to edit my replies in this forum.... a little annoying with "quote" error in my last response
-
Upgraded the first of many 2100's and it went flawlessly albeit it does take some time :-)
Like my 6100 it upgraded with pfBlockerNG, Freeradius, NUT, TFTP, LLDP packages running - all without issues.
I also moved to KEA DHCP4 backend after the upgrade, end experienced no problems on this box either. Seems like an overall good upgrade package. Let's see how it behaves the coming weeks.
-
Upgraded 5100 without issues.
Packages running include avahi, ntpd and nut. Switched to KEA DHCP no issues. Run external Unbound DNS on docker synology.
No issues experienced.
Great update. Thank you team. -
@mwatch I put on 24.11-RC version a couple of days ago and everything was working great. So, this morning it said 24.11 was available and I thought it should work great since the RC is running so well. I upgraded and my Dell PC no longer worked. I could not ping my LAN interface. I assumed my license expired but it did not warn me. So, I pulled the NIC and installed it in an older Dell PC using 2.7.2
-
Upgraded my custom box yesterday without drama and immediatly switched to using Kea.
(Intel i5-8365U CPU @ 1.60GHz / 16GB memory / 2.5Gb igc)
No issues at all, noticed slight connection improvements showing up on the monitoring graphs.
I looked back to my monthly data and a previous reboot just over a week ago made no difference so something changed for the better in this upgrade for me.
-
@delphin_007 has this issue resolved ?
-
Update carried out on my 8200, just a little scared because it took pkusieurs perides of “20 seconds” more for me to get the login page again.
All's well for now.
THANK YOU to all the team and happy new year!!!!
-
@SwissSteph said in pfSense Plus Software Version 24.11 is here!:
Update carried out on my 8200, just a little scared because it took pkusieurs perides of “20 seconds” more for me to get the login page again.
All's well for now.
THANK YOU to all the team and happy new year!!!!
Update carried out on my 8200, just a little scared because it took several periods of “20 seconds” longer for me to get the login page again.
All's well for now.
THANK YOU to the whole team and happy new year! !!!
Modified my text for a better translation (sorry)
And a question, can we switch to “KEA” having “pfBbockerNG” trasparently or do we have to wait for a “tuto”!? Thanks again!
I started with two "no-name" pfsense, one for use at home and the other as a backup in case of problems (which can happen when you're new to pfsense).
... And now I'm living with a Netgate 8200
... And sorry for my bad English... -
@SwissSteph said in pfSense Plus Software Version 24.11 is here!:
And a question, can we switch to “KEA” having “pfBbockerNG” trasparently or do we have to wait for a “tuto”!? Thanks again!
I have switched to KEA after 24.11 on alll my boxes without any issues. All of them runs pfBlockerNG so no tutorial needed - I just switched and have not done any additional config apart from enabling dynamic DNS registration.
-
Am I just missing it or do the DHCP logs not show IP/MAC on IP registrations when you switch to Kea on 24.11?
-
Thank you for your message and confirmation that “everything should go smoothly”.
