UNMAP failed on Boot
-
Good afternoon,
The following error is occurring only on each boot time of this new pfSense installation. Should I be concerned or should it be ignored?
(da0:pvscsi0:0:0:0): UNMAP failed, switching to WRITE SAME(16) with UNMAP BIO_DELETE
(da0:pvscsi0:0:0:0): UNMAP. CDB: 42 00 00 00 00 00 00 00 08 00
(da0:pvscsi0:0:0:0): CAM status: SCSI Status Error
(da0:pvscsi0:0:0:0): SCSI status: Check Condition
(da0:pvscsi0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB)
(da0:pvscsi0:0:0:0): Command byte 7 is invalid
(da0:pvscsi0:0:0:0): Error 22, Unretryable errorApparently the system is running well, without any major changes in the logs.
Environment details:
PfSense CE 2.8
File System ZFS
VMware ESXi, 8.0.3, 24022510
SCSI Paravirtual Controler
Hard Disk Thick Provision Lazy Zeroed
Datastore VMFS 6
VM function: FW/GW of a one thousand user wifi networkI've found some reports of similar errors but none of the answers seem to apply to the characteristics of my environment.
Thank you,
Geovane
-
Hi,
Today I installed a new VM for a different purpose, with the same pfSense/Disk/Virtualization features, and the exact same error occurred on the new machine.
Geovane
-
-
@geovaneg It may not be related but whilst the PVSCSI is traditionally more performant, i've used the LSILogic SAS controller on my installs without issue. I believe it is also mentioned in the docs.