Netgate 8200 MAX VLAN & Switch Configuration Issue
-
I already checked with Wireshark, and there are no VLAN 27 tags being sent.
-
@smsigroupit said in Netgate 8200 MAX VLAN & Switch Configuration Issue:
I already checked with Wireshark, and there are no VLAN 27 tags being sent.
Are the other VLAN tags (31, 32, 33, 34) sent? Did you upgrade from 24.11 and if yes can revert to that version to see if that is an issue of 25.7 only?
I'm not sure how support works with Netgate. Either see if @stephenw10 (a Netgate employee) does know of some quirks with VLANs and the 8200. I'd be surprised since it's a very basic feature (which I use on almost every pfSense installation I got, but I don't own a 8200) but you never know. Or open a ticket with Netgate.
-
-
@smsigroupit just a remark: I'm still baffled that on the switch it allows not tagged VLAN 1 traffic on ports that have PVID set to 27. That really should not happen.
-
Update:
I already tried reverting to version 24.11, but the issue still persists.Thank you.
-
I also tested by changing the interface to igc1 for both LAN and VLAN, but the problem remains.
Thank you!
-
@smsigroupit said in Netgate 8200 MAX VLAN & Switch Configuration Issue:
I also tested by changing the interface to igc1 for both LAN and VLAN, but the problem remains.
Have you got another switch you can try?
-
@patient0 said in Netgate 8200 MAX VLAN & Switch Configuration Issue:
@smsigroupit said in Netgate 8200 MAX VLAN & Switch Configuration Issue:
I also tested by changing the interface to igc1 for both LAN and VLAN, but the problem remains.
Have you got another switch you can try?
I will test the setup using another switch and provide an update afterward.
Thank you!
-
I already tested the setup using another switch, but the issue still persists.
-
@smsigroupit on another note: you have setup all the necessary firewall rules (one allow all rules at least) on the VLAN interfaces, I assume?
