OpenVPN to LAN subnet partially working
-
Hi, I'm trying to make an Open VPN access to allow multiple remote users to access LAN subnet and, mainly, work with remote IPSEC VPN.
My setup:
LAN-192.168.10.0/24–--WAN--->Internet<----OpenVPN Remote Cli-172.16.1.0/24
| |
--IPSEC VPN srvr 10.0.2.100--This is the OpenVPN server configuration:
Remote Access (SSL/TLS + User Auth)
TUN
interface: WAN
local port: 1194
IPv4 Tunnel Network: 172.16.1.0/24
IPv4 Local Network: 192.168.10.0/24With this setup I'm able to establish OpenVPN connection and ping the lan subnet 192.168.10.0/24 from two clients but I'm not able to ping the remote IPSec server in any way.
In the firewall rules I don't see any block, I see PASS from source 172.16.1.2 (the first address assigned to remote OpenVPN client) to remote server I'm pinging 10.0.2.100I also tried
IPv4 Tunnel Network: 192.168.10.0/24
IPv4 Local Network: 10.0.2.0/24but in this case only the first connected client is able to ping only the pfsense lan address 192.168.10.250 and the remote IPsec server.
It's obvious that I'm missing something but I'm really new and don't know exactly how to configure it.
Maybe I can keep this configuration:
IPv4 Tunnel Network: 172.16.1.0/24
IPv4 Local Network: 192.168.10.0/24and add a phase2 to IPSec Client (and server but I'll have to ask cause I'm not managing it) with 172.16.1.0/24 as local subnet.
Any help would be much appreciated. Thanks