Site to Site with stunnel package
-
hello everybody,
i want to connect two companies with a normal openvpn site to site connection.
One Company is located at a small town in china, so here is the problem.
The openvpn traffic will be blocked by the chinese firewall because of deep packet inspection.
So i setup a site to site connection using a ssl wrapper like stunnel. pfsense has a package for this usage.
My problem is, that the established openvpn connection broke after a few seconds or minutes.
I have configured one site as server and one site as client.
Is it possible in general to get such a setup to work stable? Or is the package stunnel not usable for site to site connections?
Maybe one of you guys have the same setup or more experiences :-
Thanks in advance for your input!
Niklas -
Finally it works now, the tunnel is up and seems to be stable!
The solution is not so clear, i reset all the settings and start from scratch.
But i have one more issue, maybe you have an idea.
I can not ping from Site A to Site B, but the ping works from site B to A.
I have configured the routes between the two sites via openvpn server config page.
The routes are in the routing table on both sites.I have ping the opvpn interfaces directly from the two pfsense appliances. Same procedure, Site A can not ping Site B but the other way works.
So Site A has the openvpn ip 192.168.1.1 and Site B has the ip 192.168.1.2.
Does anyone have some tips? -
Finally it works now, the tunnel is up and seems to be stable!
The solution is not so clear, i reset all the settings and start from scratch.But i have one more issue, maybe you have an idea.
I can not ping from Site A to Site B, but the ping works from site B to A.
I have configured the routes between the two sites via openvpn server config page.
The routes are in the routing table on both sites.I have ping the opvpn interfaces directly from the two pfsense appliances. Same procedure, Site A can not ping Site B but the other way works.
So Site A has the openvpn ip 192.168.1.1 and Site B has the ip 192.168.1.2.
Does anyone have some tips?Dear Sir
i have the same issue can you please support us with your configuration
my solution with the attachment .
my Site A have
Wan addr 192.168.1.12
Lan addr 192.168.10.1Site B have
Wan addr 192.168.1.13
Lan addr 192.168.12.1i didnt know how to setup the Stunnel
i appreciate you help
-
& if you please can you tell me if i want to connect to my PFsense VPN server thorugh remote vpn from country such egypt , like china the run DPI to block OpenVPn , how can i use stunnels from pfsense or should i use stunnel App from https://www.stunnel.org/downloads.html
if so can you tell me steps plz
many thanks
i appreciate your help
-
If you please can tell me where is my mistake :) :) :) :)
i used private ips for example only , in production i use public ips on both sites
-
i have the same issue , can any one here help please
-
Any updates please