Captive portal html and images….

lir

yeah i think i've booted up several times since, but, even weirder…
i've had running until a few minutes ago BETA-2, i manually upgraded to beta4 and ofcourse rebooted...

it didn't help to my unplesant surprise :(
i found this thread to be somewhat related to my problem i think: http://forum.pfsense.org/index.php?topic=916.0

sullrich

We are running exactly this at work and it works fine….

lir

well im runing "BETA4 built on Mon May 8 23:15:38 UTC 2006" (upgraded from beta-2)
and i've shown you my html file, still it's not working.

lets try to debug it together cause i can honestly say that something isn't right.
here is some output i can give you off of my head:

ls -al /usr/local/captiveportal/

total 48
drwxr-xr-x 2 root wheel 512 May 16 15:22 .
drwxr-xr-x 16 root wheel 512 Apr 23 14:15 ..
-rwxr-xr-x 1 root wheel 14120 Jan 2 23:46 index.php
-rwxr-xr-x 1 root wheel 14120 May 16 14:28 index.php.test
lrwxr-xr-x 1 root wheel 27 May 16 15:22 logo.GIF -> /var/db/cpelements/logo.GIF
lrwxr-xr-x 1 root wheel 27 May 16 15:22 logo.JPG -> /var/db/cpelements/logo.JPG
lrwxr-xr-x 1 root wheel 27 May 16 15:22 logo.PNG -> /var/db/cpelements/logo.PNG
lrwxr-xr-x 1 root wheel 27 May 16 15:22 logo.bmp -> /var/db/cpelements/logo.bmp
lrwxr-xr-x 1 root wheel 27 May 14 11:40 logo.jpg -> /var/db/cpelements/logo.jpg
-rw-r–r-- 1 root wheel 10049 Jan 15 03:33 radius_accounting.inc
-rw-r--r-- 1 root wheel 4255 Jan 15 03:33 radius_authentication.inc

can you check the sizes?
like of index.php - maybe its still outdated...

im open to try everything please.

thanks,
lir.

sullrich

I am about to reinstall the work image and see what happens.

lir

ok cool
i dont think it has anything to do with that cause i was runing beta-2 before and it didnt work either.
its not that the upgrade to beta-4 messed it but sure, give it a shot.

im waiting,

sullrich

Beta2 didnt work, it was fixed after this.

Gertjan

Just hopping in here ….

Did a 'sync' today (after a complet new setup from a LiveCD version Beta 4) - and - again - images aren't take neither.

I've getting the same problem (actually - I never saw it working).

Tested last week already (was already on Beta 4 that date - it just came out) with a bare index.htm portal page (like the one mentionned above):
This was a no go - no images are shown.

Still, they (and the links) are present.

Again, I re-installed from a "CD V4" - and sync-ed.

A solution for me is: use a private external web site - take the link to the image 'over there', throw in the link on the portal page, authorize the IP of that web server on the corresponding Portal-Tab, and I reached my goal !

Can I have 'your' version ;)

If not - very impressed by the product - it just rocks.

Juve

I'm using beta4 like you and everything is ok, including use of HTTPS.
I had several problems on beta2, It couldn't display images but all my problems are gone since that time.

Have you monitored the filter output, nothing is blocked ? in the HTML output that you obtain in your browser all is fine ?

Gertjan

@Juve:

Have you monitored the filter output, nothing is blocked ? in the HTML output that you obtain in your browser all is fine ?

Like 'upstairs' :


Welcome to Free ISP

![](pfsense.jpg)

Please enter your username and password to log-on to the system.

The link in /usr/local/captiveportal named pfsense.jpg is present 'by default'.
It's point to an image that is present also (all this is a gift from the compagny ;-)).

IE7 doesn't show the image - just a small red cross.

So, about the source in my web browser - what I had in Ultra Edit showed up in ….. Ultra Edit (second window) when I asked IE7 to show me the source....

(Don't worry, used Firefox also).

What do you mean by '…monitored the filter output, nothing is blocked ?' ? Do I have to add the pfSense server Portal IP as 'accepted' ?
I'll try a 'permit all' on the OPT1 firewall interface - if it's that what you mean.

lir

So I'm seeing that others are having this problem just as well…
How about we try to fix it?

I have the Beta4 CD right here but it's no fun re-installing.
I'd like to know where is the problem.

Gertjan

@lir:

So I'm seeing that others are having this problem just as well…
How about we try to fix it?

Urgent : Tried this morning and integrated this line :

It worked !!!!

When I converted my opther png file in jpg format - it show up also…

The good thing : it work - and for lir : search ! - the pb is on your side, as it was on mine. Beta 4 works (never had a doubt about it, Sullrich ;-) ).
The bad new : sorry about losing your time about this && I don't know what I did to make it work, normally I track changes I applied - this time I can't give a clue…

Anyway - one happy user here.....

PS: one thing : showing a preview with the "View current page" on the Captive portal setup page doesn't show any of these local images - but a try 'on the Portal side' (and that's whats count) showed them all !!!).

hoba

I did split the installationproblems to another thread in the right board: http://forum.pfsense.org/index.php?topic=1251.0

PLEASE DON'T HIJACK THREADS!!! Thanks.

lir

i managed to overcome the fresh install problem which was problematic by upgrading to beta-4 using the firmware upgrade
on an already installed beta-4 system from fresh (it had some errors during install).

so i can get on the webgui and everything but im having the exact same problems again with the captive portal not showing
any images. i tried rebooting, i tried to remove all images and then reupload them… still i cant see them.

any ideas please?
(so now im on beta4)

Gertjan

Try this line (the image should already be there)


[![](pfsense.jpg)](http://www.pfsense.com)

lir

thanks will do.
ill report back

lir

Okey so I'm still having the problem even with that link but I managed to over come it.

here are the files…

cd /usr/local/captiveportal/

ls -al

total 46
drwxr-xr-x 2 root wheel 512 May 24 07:34 .
drwxr-xr-x 16 root wheel 512 May 21 06:25 ..
-rwxr-xr-x 1 root wheel 14120 Jan 2 23:46 index.php
lrwxr-xr-x 1 root wheel 27 May 24 07:31 logo.GIF -> /var/db/cpelements/logo.GIF
lrwxr-xr-x 1 root wheel 27 May 24 07:31 logo.JPG -> /var/db/cpelements/logo.JPG
lrwxr-xr-x 1 root wheel 27 May 24 07:31 logo.PNG -> /var/db/cpelements/logo.PNG
lrwxr-xr-x 1 root wheel 27 May 24 07:31 logo.bmp -> /var/db/cpelements/logo.bmp
-rw-r--r-- 1 root wheel 10049 Jan 15 03:33 radius_accounting.inc
-rw-r--r-- 1 root wheel 4255 Jan 15 03:33 radius_authentication.inc

and here are the files on /var/db/cpelements

ls -al /var/db/cpelements/

total 200
drwxr-xr-x 2 root wheel 512 May 24 07:33 .
drwxr-xr-x 9 root wheel 512 May 24 07:32 ..
-rw-r--r-- 1 root wheel 11359 May 24 07:31 logo.GIF
-rw-r--r-- 1 root wheel 11033 May 24 07:31 logo.JPG
-rw-r--r-- 1 root wheel 4880 May 24 07:31 logo.PNG
-rw-r--r-- 1 root wheel 169798 May 24 07:31 logo.bmp

so i figured out that i can see the file only if it's located on /usr/local/captiveportal and with no link or anything, like this:
-rw-r--r-- 1 root wheel 11033 May 24 07:33 logo.jpg

SO... thats the fix.

jeroen234

thats no bug thats normal captive working
if you ask for www.google.com it redirecting the www.google.com ip to youre pfsense ip until youre accepted

if portal is on and you have jpg logo.jpg then all these jpg's are the same until youre cleard

www.google.com/logo.jpg
www.msn.com/logo.jpg
www.hotmail.com/logo.jpg
etc etc

so you must make links to root in youre captive portal webpage

will work for all the links

ps. never use uppercase in filenames (logo.JPG) webservers and webbrowsers don't like that
only lowercase

lir

you didnt understand the problem the way i presented it.
i said that when i upload files it puts a link in /usr/local/captiveportal of them that points to /var/db/cpelements
thats what happens when i upload images from the admin gui.
this way it DOES NOT WORK. no matter if its upper case, lower case or without a case.

if i try manually to ssh to the machine and leave the filename at /usr/local/captiveportal (no links), just put the actual logo.jpg file
in /usr/local/captiveportal and doesnt make a link out of it then its just fine.

DrNo

Could someone explain how to fix this image issue to a BSD lamen?

I am very unfamiliar with BSD command line arguments and am having problems copying my logo.png into the '/usr/local/captiveportal/' directory so it will show correctly on my capture portal. Every time I try to copy my 'logo.png' file from either the '/var/db/cpelements' dir or the '/tmp' dir (I used the GUI to upload it there) I am met with a "Read-only file system" error.

I am running BETA 4 embedded on a WRAP equiped with a 128MB CF card. If someone could take a minute or two to explain the commands I need to know and the steps I need to take to resolve this issue, I would greatly appreciate it.

Thnx in advance,

-DrNO

sullrich

@DrNo:

Could someone explain how to fix this image issue to a BSD lamen?

I am very unfamiliar with BSD command line arguments and am having problems copying my logo.png into the '/usr/local/captiveportal/' directory so it will show correctly on my capture portal. Every time I try to copy my 'logo.png' file from either the '/var/db/cpelements' dir or the '/tmp' dir (I used the GUI to upload it there) I am met with a "Read-only file system" error.

I am running BETA 4 embedded on a WRAP equiped with a 128MB CF card. If someone could take a minute or two to explain the commands I need to know and the steps I need to take to resolve this issue, I would greatly appreciate it.

Thnx in advance,

-DrNO

None of this is required. Simply upload the image to the element manager. It will handle everything.