Cap. port. on total local configuration.
-
Hello,
This is my configuration :
version RC1
WAN = 192.168.1/24
LAN = 192.168.0/24
WLAN = 192.168.2/24 (=OPT1)Fix IP for all psfense interfaces = .1
Cap. port. is active for WLAN interface.
So, I am working without a real internet connection, so without DNS servers.
CAp. port. is working fine with the WiFi connection if I call in a webbrowser the adress 192.168.1.1 (with is the local WAN interface, so I receive a login window for the pfsense login).
Problem is that the cap. port. login isn't comming up if f.e. I use http://www.doesnmatherwithadress.com
I know WLANIP:8000 is an option but I what it having working also for those users how don't know anything about the configuration/network.Someone an idee ?
Thanks. -
You have to use the dns-forwarder of the pfsense for the wireless clients. Otherwise it can't redirect to the captive portal page. Set up your LAN DNS server at system>general and assign the wireless clients the pfsense wlan IP (done by default). Also uncheck "block private IP ranges" at interfaces>wan.