RIP $100 {awarded}

billm

OK, it's not complete and not yet in the package XML, but I just committed a RIP package
http://cvstrac.pfsense.com/chngview?cn=12526

I'm not sure I caught whether the machine you'd run this on is a full install or embedded. If it's full, then all that should be needed for you to be able to test is to get the package info moved into the package XML.

–Bill

pcatiprodotnet

Hi Bill,
I run imbedded CF versions. If you prefer, I'll attempt to find some free time at work one day and do a full install on an extra pc and test. As far as what RIP features we desire, we'll be happy if pfSense is simply capable of fully & correctly communicating with other RIP enabled routers/devices (such as RIP versions: V1, V2 broadcast & V2 Multicast).
Thank you,
-Pete

billm

@pcatiprodotnet:

Hi Bill,
I run imbedded CF versions. If you prefer, I'll attempt to find some free time at work one day and do a full install on an extra pc and test. As far as what RIP features we desire, we'll be happy if pfSense is simply capable of fully & correctly communicating with other RIP enabled routers/devices (RIP versions: V1, V2 broadcast, & V2 Multicast).
Thank you,
-Pete

It'd be easier if you can test with a full install. I've got no problem giving you a patch for embedded later once we've established that it works well. routed is already installed on all the embedded platforms so it's a matter of copying two files over and making a small change to fbegin.inc to enable it (I think - I haven't spent alot of time trying to make this work on embedded, so I may be missing a step, but OLSR is implemented as a package, so this should just hook in the same way).

–Bill

pcatiprodotnet

I haven't the time to personally test this any time soon. If anyone interested could test this pfSense RIP with even your home router (assuming it has RIP), I can go ahead and award this bounty.
Thanks, -pc

sullrich

Do other devs count? I would love to help Bill get some loving, too ;)

pcatiprodotnet

Of course!
Thanks, -pc

billm

@pcatiprodotnet:

Of course!
Thanks, -pc

Thanks, I'll work on wrapping this up this weekend then. Just been waiting for you to have time to be able to test ;)

–Bill

billm

@billm:

@pcatiprodotnet:

Of course!
Thanks, -pc

Thanks, I'll work on wrapping this up this weekend then. Just been waiting for you to have time to be able to test ;)

–Bill

OK, routed package posted. It has the following features:
Supports RIP v1 and RIP v2
Allows you to choose which interface to run RIP on (the version is global, can't choose per interface)
Allows you to set a RIP v2 password (this will apply to all RIP enabled interfaces)

Some of the items I wanted to add (individual settings per interface) weren't an option with our current package code. It was my understanding this wasn't a requirement. If the package is considered acceptable, I'd be willing to create a patch to enable this functionality on an embedded install (packages only work on full installs).

–Bill

tunge2

this a nice package!

billm

@tunge2:

this a nice package!

Working for you tunge2 ?

–Bill

buraglio

it installs and starts for me.
root 77143 0.0 0.8 1356 956 ?? Ss 11:54PM 0:00.30 /sbin/routed

I also see packets on the wire:

[buraglio@precious:~ ] sudo tcpdump -i en1 -vvv -s 1500 port 520 <3045>
tcpdump: listening on en1, link-type EN10MB (Ethernet), capture size 1500 bytes
00:00:48.897769 IP (tos 0x0, ttl 1, id 11754, offset 0, flags [none], length: 92) 192.168.209.1.router > rip2-routers.mcast.net.router: [udp sum ok]
RIPv2, Response, length: 64, routes: 3
Simple Text Authentication data: password
AFI: IPv4: 192.168.209.0/27, tag 0x0000, metric: 1, next-hop: self
AFI: IPv4: dhcp-74-136-192-0.insightbb.com/19, tag 0x0000, metric: 1, next-hop: self
0x0000: 0202 0000 ffff 0002 7061 7373 776f 7264
0x0010: 0000 0000 0000 0000 0002 0000 c0a8 d100
0x0020: ffff ffe0 0000 0000 0000 0001 0002 0000
0x0030: 4a88 c000 ffff e000 0000 0000 0000 0001
00:01:18.899978 IP (tos 0x0, ttl 1, id 725, offset 0, flags [none], length: 92) 192.168.209.1.router > rip2-routers.mcast.net.router: [udp sum ok]
RIPv2, Response, length: 64, routes: 3
Simple Text Authentication data: password
AFI: IPv4: 192.168.209.0/27, tag 0x0000, metric: 1, next-hop: self
AFI: IPv4: dhcp-74-136-192-0.insightbb.com/19, tag 0x0000, metric: 1, next-hop: self
0x0000: 0202 0000 ffff 0002 7061 7373 776f 7264
0x0010: 0000 0000 0000 0000 0002 0000 c0a8 d100
0x0020: ffff ffe0 0000 0000 0000 0001 0002 0000
0x0030: 4a88 c000 ffff e000 0000 0000 0000 0001

It starts and stops from the gui.
I'll bounce the box and hopefully get another RIP enabled device on tomorrow.

nb

sullrich

Ship it!

j/k

buraglio

Sorry for the delay, I finally got around to bouncing this box that's running routed and found that it was not running after a restart. /usr/local/etc/rc.d/ did not have a startup script for routed which would pobably explain it. I reinstalled the pkg which of course restarted the service but there was still no startup script so I don't expect it to be running after a restart.
So if it operates as I'm reading it should a simple startup script should start it and begin forwarding packets among the connected nets (since the box is acting as a router). I don't have anything else that runs rip close by that I can test with to see but as I saw before it's at least talking as I'd expect it to.

This worked at the most basic level (starting and stopping the service) on my box:

–snip

#!/bin/sh

rc_start() {
/sbin/routed
}

rc_stop() {
/usr/bin/killall routed
}

case $1 in
start)
rc_start
;;
stop)
rc_stop
;;
restart)
rc_stop
rc_start
;;
esac

---snip

--nb

billm

Gah, thanks, I'll get that added.

–Bill

billm

@billm:

Gah, thanks, I'll get that added.

–Bill

Bah, this showed a bug in package startup, thanks, fixed now in HEAD. Waiting on Scott to sync the change back to RELENG_1 (although now we've gotta check the known working packages to make sure I didn't just break them…doh!)

--Bill

pcatiprodotnet

Has anyone verifed RIP as working and communicating routes with other RIP devices yet?
Thanks, -pc

billm

@pcatiprodotnet:

Has anyone verifed RIP as working and communicating routes with other RIP devices yet?
Thanks, -pc

Not that I'm aware of.

–Bill

sullrich

Can someone please verify that this pacakge works so we can close out this bounty? Thanks!

billm

Since nobody is interested in providing feedback on this package, I've pulled it from RELENG_1. If there's not feedback on it during our next beta cycle it won't make it into 1.1 either.

–Bill

diegoc

Hi all

have installed this package in 3 pf in my test lab, and configured with RIP v2, all the pfs work in routing mode, without NAT, But when i go to Diagnostics -> Routes, there is nothing. I have to do something else, to get this package working?