Help with wireless please

PC_Arcade

The status of the bridge is reported at status>interfaces. What does it look like at your setup?

Seems OK :```
Bridge (bridge0) learning

on both LAN and Wireless interfaces

> Btw, you only can bridge a wireless interface to something else if it is in AP-mode

Yep, I'm in Access point mode

> and all bridge interfaces have to be uplinked (in your case LAN and WLAN).

Can you explain this bit in a little more detail please?

hoba

An interface in AP-mode is always up. However if you unhook the LAN interface (disconnect cable) and this link is down the bridge won't work anymore.

PC_Arcade

Aah, I see, no - that never happens pfsense is wired into the switch which is never off nor unplugged.

Is there anything else that could explain the behaviour?

hoba

What version are you running? Maybe try the latest releng snapshot.

PC_Arcade

@hoba:

What version are you running? Maybe try the latest releng snapshot.

I am already (more or less : 1.0.1-SNAPSHOT-02-14-2007) :'(

Would posting my config here be a sensible thing to do so it can be checked for stupidity?

hoba

The mainproblem is that I can't test anything atm as I don't have my lab at my fingertips for the next few days/weeks. If you come to IRC (freenode, channel ##pfsense) and open up your administration at WAN and send me the logindetails I could take a look at your config.

PC_Arcade

I've not had much luck catching you online hoba, is there any way I can allow you access to my webgui so you can have a poke about and see if there's anything obvious?

hoba

Maybe we live in very contrary timezones? I'm usually online evening and nighttimes central european time. Give it one more try ;)

PC_Arcade

Will do :)

I'm in the UK so we shouldn't be that disparate.

PC_Arcade

reinstalled this morning as requested.

There seems to be a problem with the build server though, it's running 3 days behind. The most recent build there is : 1.0.1-SNAPSHOT-02-21-2007 - built on Sun Feb 25 14:57:29 EST 2007.

is there any other means of getting the snapshot with the wireless changes commmitted?

hoba

You have to look at the build date, not the version number. It should be the new version.

PC_Arcade

Well, the build date says sunday the 25th which was 3 days ago

sullrich

http://snapshots.pfsense.com/FreeBSD6/RELENG_1/updates/pfSense-Full-Update-1.0.1-SNAPSHOT-02-27-2007.tgz

PC_Arcade

Updated to the latest snapshot, and I'm still having the same problem :(

hoba

We just committed a newer RAL driver. Please test in some hours with the new build.

PC_Arcade

Will do, thanks Hoba :)