WebGUI is VERY SLOW
-
Is this normal? It is just that everything takes a good minute or two to load up on the webconfigurator. It seems too slow considering it is on a 100mb card. I don't get it, did i do something wrong???
-
no, not normal. Can you ping the firewall from your pc? what is the response time?
-
Depends on the speed of your hardware, but taking that long to load up a page definitely doesn't sound normal. A 266 MHz WRAP is substantially faster than a "minute or two" to load up pages. If you're running a 486 or something, that might be expected.
-
Check for duplex mismatches, etc.
-
Ok, i checked it out, and i can ping it all day long at less than 1 ms. So, i don't think it is a network latency issue. However, i should point out that this is a router on stick config aka 1 network card with 4 interfaces.
The hardware is pretty good:
P3 933MHz
256MB RAM
and i have it installed to a small 4gig hard drive (it was already installed)Everything is full duplex into an HP Procurve.
-
Sounds like access to your drive is very slow.
-
I am starting to think that too now… ill play with it a bit more. I backed up my config so i can easily try other mediums.
thanks for the help guys.
-
Easiest test is to run from livecd and rebench.