SquidGuard package TEST
-
http://diskatel.narod.ru/squidguard/squidguard.zip is not working .. was removed ? the site was in russian .. i cant understand …
-
http://diskatel.narod.ru/squidguard/squidguard.zip is not working .. was removed ?
Click on "save target as" does work however.
-
it's not working … i use wget .... and error 404 is file not found ....
lucky!! -
Hi all
Sorry, now i can't update sources.
Plz waite 1-2 day's - i will repair this.
Thanks -
Yeah, you seem right. Sorry!
I can DL the file but the zip archive is corrupt.Well, it just DLs the HTML page and saves it as the archive. Sorry for the confusion here!
-
This worked
(1) http://diskatel.narod.ru/pfSense/packages/pkg_config.xml
(2) http://diskatel.narod.ru/pfSense/packages/squidGuard-1.2.0_1.tbz
but squidGuard-1.2.0_1.tbz need correct - i tomorrow update
Also you can prepare squidGuard-1.2.0_1.tbz file too - need unpack, remove squid from 'expected packages' list and pack to back.
If take standart port from FreeBSD - this install latest version squid and system will have 2 squid versions (very bad >:()
Sorryps You may need update only you local pkg_config.xml form (1) source and all other's will downloaded and installed automaticly.
-
When you are ready please send all of the needed bits to coreteam@pfsense.com and we will integrate this package into our master package area.
-
When you are ready please send all of the needed bits to coreteam@pfsense.com and we will integrate this package into our master package area.
OK
Now i catch bugs gui and fix specificity work SG. -
Updated new _http://diskatel.narod.ru/pfSense/packages/squidGuard-1.2.0_1.tbz
Now this package not need squid on installation (i remove this settings from this port)
May be possible uninstall/reinstall squid without deinstallation squidGuard.
–-----------------------------
Updated new version sources files. I rebuild core gui for faster work.
Plz anybody test new installation too.1\. Need install local xml-rpc. How - pls looking for this topic http://forum.pfsense.org/index.php/topic,312.0.html 2\. Download pkg_config.xml for this package from http://diskatel.narod.ru/pfSense/packages/pkg_config.xml and put them to you xml-rpc. If all placed correct - in package list you looking one package -squidGuard 3\. Install this package. -
Found problems first installation
- config not autocreate
- blacklist not scanned&updated
For fix - need in gui install (upload) blacklist and Apply changes
PS i near time fix this problems for auto update on first installation -
Ok
Ready for test ;) -
i'm testing now …. instalations sounds good .. upload blacklist good.... interface good... some tip .... change the name on pfsense menu to other different of proxy server... hummm may be content filtering ….
i still testing ....
-
when configuration was done on filter , the line of redirector appears on squid … right .. .good ...
but the contents of /usr/local/etc/squidGuard/squidGuard.conf are same on all situations ... no changes were made on file .... every time is look like this :more /usr/local/etc/squidGuard/squidGuard.conf
============================================================
SquidGuard configuration file
This file generated automaticly with SquidGuard configurator
(C)2006 Serg Dvoriancev
email: dv_serg@mail.ru
============================================================
logdir /var/squidGuard/log
dbhome /var/db/squidGuardacl {
default {
pass none
redirect http://127.0.0.1/sgerror.php
}
} -
i find the error ,
when you define an time in acl , default or other acls , the config shows only that above squidguard.conf, if no time is used in acl ,,, evething is fine ,, -
other typos
when click save on squid properties, this remove the line of redirector on squid.conf, and the filter stops working …
if you click the button start of squidguard in "Status > Services " menu , this hangs squid an stop then all.
-
Notation: If exists error in configuration data, Configurator maked small default config with DenyAll access. All error's posts in log on the firts page webGUI.
This is default block config.# ============================================================ # SquidGuard configuration file # # This file generated automaticly with SquidGuard configurator # # (C)2006 Serg Dvoriancev # email: dv_serg@mail.ru # ============================================================ logdir /var/squidGuard/log dbhome /var/db/squidGuard acl { default { pass none redirect http://127.0.0.1/sgerror.php } }If You have this config - pleace looking Log on first page squidGuard gui (checkbox must be checked). Latest errors added when Apply button pressed
ps I planing add 'ERROR config DATA' notification on first page .Thanks for you test - i will analyze bugs
–---------------------------------
BagBeer - beer for real programmer's -
when click save on squid properties, this remove the line of redirector on squid.conf, and the filter stops working ...i know this problem, but temporary no see way to solve(only hack squid GUI src :( ).
Now after change squid config need press Apply button in squidGuard gui. This renew all config's.if you click the button start of squidguard in "Status > Services " menu , this hangs squid an stop then all.OK, thanks
-
just an idea …. why don't you install squid togheter with squidguard, an proxy complete solution with filtering, and people can decide if they want only a proxy , they use squid or if want content filtreing proxy they will use your package ...
i am running on a new trouble ....
the message says
The url_rewriter helpers are crashing too rapidly, need help!
and squid crash ...
and idea ?
-
Need Log list, SG config and more information about
(log - from 1 page SG gui)PS How you name of package 'Proxy Content filter'?
Word 'proxy' must exists in name, what makes it easy to understand -
ok … NAME .. Proxy Content Filter .. great..
the error on squid were because package db3 was missing ..... an pkg_add -r db3 solves all ...
now in production ...
