SquidGuard package TEST
-
i will reinstall in 6 or 7 day my fpsense for somes reasons :
single CPU >> two CPU
harddrive >> 2GB compact flash
3x 3c905B >> 4x 3c905B
ATX motherboard MSI >> industrial SBC motherboard
PC case ATX >> industrial SBC chassis (like MGE ES8+ case's)
ATX power supply >> industrial SBC power supply
and the must !
2x 128MB sdr PC133 >> 4x 256MB PC100 ecc regI have killed pfsense (error, files missing maybe harddrive) … i stop all my work for 6-7 days in pfsense and squidguard !
And i want to change all my network's ip adresses ... so i must reflect !
-
squidguard was broken when i upraded snapshot firmware …
-
-
and could you reinstall it ?
i think the best will be delete SG, reboot, reinstall SG and reboot … and see ...
-
I need 1-2 days for test this on Beta 2
-
This problem happens becose of SG package not in official list
When firmware upgrade finished - processed update all packages prom www.pfsense.com. And not found SG package …Need manual add xml and inc files to /usr/local/pkg or deinstall package before and install after upgrade firmware
-
with full new install of 1.2beta2, my squid is unstable, it start, it stop when it want …
light and/or guard, can't resolve the problem ... -
on 1.2beta2 :
boot pfsense ok
start pfsense oK
install squid ok
configure squid ok
start squid ok
install squidguard ok
configuration squidguard ok
service squidguard ok
install lightsquid ok
configure lightsquid ok
test lightsquid okrestart all services : ok
reboot fpsense …. ok
service squid start ok
service squiguard start : no exist
package lightsquid : uninstalledI love !!!
-
this is after upgrade firmware?
-
No, i have burn a 1.2b2 cdrom, boot with it … install into computer ... and configure and then, after a last reboot, install package !
EDIT : On one other computer, with 1.0.1 updated to 1.2b2 ... the problem is there too ! (uninstall all package, reboot, update et install new package)
-
I found problem .. after each reboot my packages proccess reinstallation ???
Thanks for this bug. Fix wil be near time. -
Package reinstallation OR uninstall :
dashboard : reinstall
squiguard : uninstall
lightsquid : uninstallall other packages … no problems ... (nmap, states_new, snort and squid, phpsysinfos)
-
Package reinstallation OR uninstall :
dashboard : reinstall
squiguard : uninstall
lightsquid : uninstallall other packages … no problems ... (nmap, states_new, snort and squid, phpsysinfos)
this may be global bug
-
i think …
-
where can we do a bug report ?
-
-
no bug report needed !!!
look here :
http://forum.pfsense.org/index.php/topic,5388.0.html -
Hello guys, first I'd like to congratulate you for the excellent work (i've read the entire topic) on squidguard;
2nd, I'd like to know when can we expect to have SG on the main package list of Pfsense? in 1.2 final release can we expect SG? I may be wrong, but SG seems fine to be included in pfsense main package list today, with 1.2-beta2 out…. how about it??
I know you can tell me that I always may install it manually, as you have done, but I'm new on pfsense and bsd culture and would not like to damage my install (as it would certainly happen)
congratulations one more time and please, that you may consider place SG on main packages now :D
thanks a lot
srs
-
hi all,
i was out a few days, because was sick with gripe, but i back …..i'm running SG in 1.2-BETA-1-TESTING-SNAPSHOT-07-02-2007
built on Wed Jul 4 20:13:49 EDT 2007
but som tricks was necessary.
before upgrade must be copy the global.inc (the modified version to install SG)
to global.inc.something
i did upgrade.. on reboot SG was broken...
copy again global.inc.something to global.inc(the modified version to install SG)..
go to Instaled packages and reinstall...
works good ... -
still dont understand how to install SG on 1.2-beta-x…. :'(
how can we expect this package in official packages list, within pfsense, for other users to test??
thanks
srs