Senao bridges

[javi.ar]

Hello I have problems to connect Senao brdiges to pfSense with senao cards NL2511CD 200mw & Soekris 4511, 80211b, with WEP 64bits , without WEP works fine but when I place WEP, does not attach to AP.
If I use some other soft it does work, does anybody knows a trick?
Here is the output…
$ ifconfig -v wi0
wi0: flags=8943 <up,broadcast,running,promisc,simplex,multicast>mtu 1500
inet6 fe80::202:6fff:fe35:3a07%wi0 prefixlen 64 scopeid 0x7
ether 00:02:6f:35:3a:07
media: IEEE 802.11 Wireless Ethernet autoselect mode 11b <hostap>(DS/2Mbps <hostap>)
status: associated
ssid velonet channel 11 (2462) bssid 00:02:6f:35:3a:07
stationname "FreeBSD WaveLAN/IEEE node"
authmode SHARED privacy MIXED deftxkey 1
wepkey 1:40-bit powersavemode OFF powersavesleep 100 txpowmax 100
rtsthreshold 2346 mcastrate 1 fragthreshold 2346 -pureg protmode OFF
-wme -burst ssid SHOW -apbridge dtimperiod 1 bintval 100

does anybody see anything unusual?? thanks in advance</hostap></hostap></up,broadcast,running,promisc,simplex,multicast>

[lsf]

Try authmode open.