SquidGuard package TEST
-
Yes - this wrong code. I fix this near time
-
Has development on this stopped?
-
A couple of issues that I am seeing:
MINOR
The run status always says STOPPED
When you install SquidGuard, it does not require Squid. dependency failure?PROBLEMS
After installing SquidGuard the first thing I do is download the latest blacklist.On the General Settings tab
I click on ENABLE and I click the checkbox to enable the BLACKLIST. I click on SAVEI click on the TIMES tab and create an entry for ALWAYS
I click on the DEFAULT tab. I set the default time to ALWAYS. I click on porn and I click to deny access. I click SAVE. Under Default Redirect I put 403. I go back to the General Settings tab and click APPLY.
Then I try to see a porn page that exists in the /var/db/squidGuard/porn/domains file. It was not blocked.
RECOMMENDATIONS
On the General Settings tab, under Blacklist, pls add the appropriate fields to allow automated updates (monthly, weekly, daily) and allow a few preset locations (Shalla Secure Services, MESD, etc). I am borrowing ideas from the urlfilter developed by Marco Sondermann for IPCop. -
A couple of issues that I am seeing:
MINOR
The run status always says STOPPED
When you install SquidGuard, it does not require Squid. dependency failure?PROBLEMS
After installing SquidGuard the first thing I do is download the latest blacklist.On the General Settings tab
I click on ENABLE and I click the checkbox to enable the BLACKLIST. I click on SAVEI click on the TIMES tab and create an entry for ALWAYS
I click on the DEFAULT tab. I set the default time to ALWAYS. I click on porn and I click to deny access. I click SAVE. Under Default Redirect I put 403. I go back to the General Settings tab and click APPLY.
Then I try to see a porn page that exists in the /var/db/squidGuard/porn/domains file. It was not blocked.
RECOMMENDATIONS
On the General Settings tab, under Blacklist, pls add the appropriate fields to allow automated updates (monthly, weekly, daily) and allow a few preset locations (Shalla Secure Services, MESD, etc). I am borrowing ideas from the urlfilter developed by Marco Sondermann for IPCop.ok
squid must be installed to squidguard works
second … it's necessary download blacklists to squidguard works...
if you want an block everytime it's not necessary use time definition ..
let'me know more about your issue .
-
2 dhipo: Thanks for you replay. :)
BlackList not obligatory. You can use you own destination rules;
–-----------------------
In the near future finally place corrections for "transparent proxy problem"
I have to do(make) one uncomfortable thing, which will require reconfiguring the package when change internal IP (will need click Button "Apply") :) -
ok …
customized destinations can be combined with default blacklists.use blacklists mean .. to block sites ... you need or blacklists, or custom destinations , or both ..
-
Here I have the same: squidguard installed and configured but do not block porn site taken on file /var/db/squidGuard/porn/domains…
My config is the most simple possible, no time, only default acl blocking porn...
any idea?
srs
-
Please answer on some question:
- you install package from official list ?
- you don't update blacklist from internet? (if update - where blacklist url)
- what url's non blocked?
ps
need check exists this url on block list or no. -
Please answer on some question:
- you install package from official list ?
- you don't update blacklist from internet? (if update - where blacklist url)
- what url's non blocked?
ps
need check exists this url on block list or no.- Yes, package installed from official list
- Yes, downloaded black list from internet (http://squidguard.mesd.k12.or.us/blacklists.tgz)
- I tested with one url taken from the file /var/db/squidGuard/porn/domains, line 600000, if I'm not wrong; it should work for any of that urls, isnt??
thanks
ps: its strange, cause it seems SG is running: my processor load is up to 51% (dual core, pentium D)!!!
-
Also
- squidGuard started (looking main package page for this or Services menu)?
- squid transparent mode?
- and can you post squidGuard config? (from 'Log' page) (to pm for example)
-
Also
- squidGuard started (looking main package page for this or Services menu)?
- squid transparent mode?
- and can you post squidGuard config? (from 'Log' page) (to pm for example)
- Squidguard running, from services menu
- proxy in transparency mode since before sg
- here goes the config:
/usr/local/etc/squidGuard/squidGuard.conf
============================================================
SquidGuard configuration file
This file generated automaticly with SquidGuard configurator
(C)2006 Serg Dvoriancev
email: dv_serg@mail.ru
============================================================
logdir /var/squidGuard/log
dbhome /var/db/squidGuardacl {
default {
pass none
redirect http://127.0.0.1/sgerror.php
}
}There is something wrong with this config, here I cannot see my source (Lan) and any configuration about blacklist…
is there any way of reseting sg config?
-
My liken 'transparent mode'.
Can you tomorrow continue checking?
I know this problem. Believe solve this problem.
Thanks. Good night. -
My liken 'transparent mode'.
Can you tomorrow continue checking?
I know this problem. Believe solve this problem.
Thanks. Good night.I can check tomorrow, It would be nice to help; only tell me what to do.
thanks and good night!
-
Hi
Please Enable View GIU Log option & press 'Save' button,
Then press 'Apply' button and get to my PM 'Web GUI log (Last 50)' content and
result squidGuard config from last (Log) page -
19.03.2008 11:56:14 : sg_reconfigure_user_db: STOPPED; User destinations list empty
What is mean?
-
19.03.2008 11:56:14 : sg_reconfigure_user_db: STOPPED; User destinations list empty
What is mean?
In Destinations page you have Empty item(s)
One from domains, expressions, urls must be defined.