CP and squid

[hoba]

Squid and CP won't work together. Search the forum, it has been discussed before.

[majedalanni]

Its work just with transparent squid  ??? ??? ???

Icant make it work without squid :o :o :o

any idea?

[hoba]

It's a design limitation currently. Unless you have a transparent squid in front of the WAN of the CP enabled interface it won't work I think.

[trendchiller]

Ok, how do i understand this now…

Captive portal does not work anyway with squid transparent installed... ?

I have squid installed and it works, BUT:

Only IP-Filtering works, no MAC-Filtering and I do NOT see the auth page nor am I redirected to it.

I'm using CP with WLAN ATH0 Atheros Chipset...

Any ideas or normal behaviour thet MAC auth dows not work and redirect does not occur with squid ?

[hadi57]

hi majedalanni

i have the following setup and every thing works fine with me since i started using pfsense with all previous versions untill 1.2:

squid = transparent

cp:
enable captive portal: checked
interface: lan
disable concurrent logins: checked
local user manager: selected

all done

hadi57

[Justinw]

I've had success using it in this manner as well just to confirm.

[mlemmo]

The problem I am having is with CP and squid trans. ON

any addresses set for unauth access, they will  return a squid error unless you are authenticated

thanks

-Mark

[mhab12]

I'm now using CP & transparent squid together.  Actually squid is bound to two different interfaces on my box and it still works great.

[capitangiaco]

I use pfsense as captive portal + squid in transparent mode:
is there the way to make work msn and skype ?

thanks

Giacomo

[hadi57]

hi

all applications are working with my clients, my setup is as follows:

squid page general settings:
proxy interface: lan
allow users on interface: checked
transparent proxy: checked
enabled logging: checked, "useful for squid report"

squid cache management:
keep all with default values and modify as per your computer specifications
enabled offline mode: checked

captive portal:
enable captive portal checked
interface: lan
idel timeout: 10 minutes
concurrent user logins: checked
authentication: local user manger "make sure you add users

all done

all applications should be working with your clients

good luck