In/Out errors :(
-
Hello all,I have got still problems with ath0(In/Out errors and low RX rate). I use CM9 over reduction mini-PCI to PCI and antenna number 1.
Do you know where can be mistake please in conf. files? Thank .Ladislav–-----------------------------------------------------------------------------------------------------
Interface statusWLAN_1 interface (ath0)
Status associated
DHCP down
MAC address 00:0b:6b:4e:40:b5
Media autoselect mode 11g <hostap>Channel 4
SSID LadaWerneman3
In/out packets 7582/9931 (1.17 MB/9.38 MB)
In/out errors 217898/5
Collisions 0
Bridge (bridge0) learning
sysctl dev.ath.0
dev.ath.0.%desc: Atheros 5212
dev.ath.0.%driver: ath
dev.ath.0.%location: slot=13 function=0
dev.ath.0.%pnpinfo: vendor=0x168c device=0x0013 subvendor=0x185f subdevice=0x1012 class=0x020000
dev.ath.0.%parent: pci1
dev.ath.0.smoothing_rate: 95
dev.ath.0.sample_rate: 10
dev.ath.0.countrycode: 0
dev.ath.0.regdomain: 0
dev.ath.0.slottime: 9
dev.ath.0.acktimeout: 29
dev.ath.0.ctstimeout: 29
dev.ath.0.softled: 0
dev.ath.0.ledpin: 0
dev.ath.0.ledon: 0
dev.ath.0.ledidle: 2700
dev.ath.0.txantenna: 1
dev.ath.0.rxantenna: 1
dev.ath.0.diversity: 0
dev.ath.0.txintrperiod: 5
dev.ath.0.diag: 0
dev.ath.0.tpscale: 0
dev.ath.0.tpc: 0
dev.ath.0.tpack: 63
dev.ath.0.tpcts: 63
dev.ath.0.rfsilent: 1
dev.ath.0.rfkill: 1
dev.ath.0.monpass: 24==========================================================================================
Here is my /cf/conf/config.xml
<pfsense><version>2.9</version>
<lastchange><theme>pfsense</theme>
<system><shellcmd>sysctl dev.ath.0.rxantenna=1;sysctl dev.ath.0.txantenna=1;sysctl dev.ath.0.diversity=0</shellcmd>
<afterfilterchangeshellcmd>sysctl dev.ath.0.rxantenna=1; sysctl dev.ath.0.txantenna=1;sysctl dev.ath.0.diversity=0</afterfilterchangeshellcmd>
<optimization>normal</optimization>
<hostname>pfsense</hostname>
<domain>local</domain>
<username>admin</username>
<password>$1$4XzahCD4$ISqQQcMiFDFI0Zpy9T0x/1</password>
<timezone>Etc/UTC</timezone>
<time-update-interval><timeservers>pool.ntp.org</timeservers>
<webgui><protocol>http</protocol>
<port><certificate><private-key></private-key></certificate></port></webgui>
<disablenatreflection>yes</disablenatreflection>
<ssh><authorizedkeys></authorizedkeys></ssh>
<enablesshd>yes</enablesshd>
<enableserial><maximumstates><shapertype><dnsallowoverride></dnsallowoverride></shapertype></maximumstates></enableserial></time-update-interval></system>
<interfaces><lan><if>fxp0</if>
<ipaddr>192.168.1.1</ipaddr>
<subnet>24</subnet>
<media><mediaopt><bandwidth>100</bandwidth>
<bandwidthtype>Mb</bandwidthtype></mediaopt></media></lan>
<wan><if>fxp1</if>
<mtu>1500</mtu>
<blockpriv><media><mediaopt><bandwidth>100</bandwidth>
<bandwidthtype>Mb</bandwidthtype>
<disableftpproxy><ipaddr>dhcp</ipaddr>
<dhcphostname><spoofmac></spoofmac></dhcphostname></disableftpproxy></mediaopt></media></blockpriv></wan>
<opt1><if>ath0</if>
<wireless><standard>11g</standard>
<mode>hostap</mode>
<protmode>rtscts</protmode>
<ssid>LadaWerneman3</ssid>
<channel>4</channel>
<authmode></authmode>
<txpower>99</txpower>
<distance>1200</distance>
<wpa><macaddr_acl></macaddr_acl>
<auth_algs>1</auth_algs>
<wpa_mode>1</wpa_mode>
<wpa_key_mgmt>WPA-PSK</wpa_key_mgmt>
<wpa_pairwise>CCMP TKIP</wpa_pairwise>
<wpa_group_rekey>60</wpa_group_rekey>
<wpa_gmk_rekey>3600</wpa_gmk_rekey>
<passphrase><ext_wpa_sw></ext_wpa_sw></passphrase></wpa>
<wep><enable><key><value>nhknnnk</value></key></enable></wep>
<apbridge><enable></enable></apbridge></wireless>
<descr>WLAN_1</descr>
<bridge>lan</bridge>
<enable><ipaddr>dhcp</ipaddr>
<subnet>32</subnet>
<gateway><spoofmac><mtu><disableftpproxy><dhcphostname></dhcphostname></disableftpproxy></mtu></spoofmac></gateway></enable></opt1></interfaces>
<staticroutes><pppoe><username><password></password></username></pppoe>
<pptp><username><password><local></local></password></username></pptp>
<bigpond><dyndns><type>dyndns</type>
<username><password></password></username></dyndns>
<dhcpd><lan><enable><range><from>192.168.1.100</from>
<to>192.168.1.199</to></range></enable></lan></dhcpd>
<pptpd><mode><redir><localip></localip></redir></mode></pptpd>
<ovpn><dnsmasq><enable></enable></dnsmasq>
<snmpd><syslocation><syscontact><rocommunity>public</rocommunity></syscontact></syslocation></snmpd>
<diag><ipv6nat></ipv6nat></diag>
<bridge><syslog><nat><ipsecpassthru><enable></enable></ipsecpassthru></nat>
<filter><rule><type>pass</type>
<interface>opt1</interface>
<max-src-nodes><max-src-states><statetimeout><statetype>keep state</statetype>
<os><nosync><source>
<network>opt1</network><destination><any></any></destination>
<log><descr><gateway>opt1</gateway></descr></log></nosync></os></statetimeout></max-src-states></max-src-nodes></rule>
<rule><type>pass</type>
<descr>Default LAN -> any</descr>
<interface>lan</interface>
<source>
<network>lan</network><destination><any></any></destination></rule></filter>
<shaper><ipsec><preferredoldsa></preferredoldsa></ipsec>
<aliases><proxyarp><cron><minute>0</minute>
<hour></hour>
<mday></mday>
<month></month>
<wday></wday>
<who>root</who>
<command></command>/usr/bin/nice -n20 newsyslog
<minute>1,31</minute>
<hour>0-5</hour>
<mday></mday>
<month></month>
<wday></wday>
<who>root</who>
<command></command>/usr/bin/nice -n20 adjkerntz -a
<minute>1</minute>
<hour></hour>
<mday>1</mday>
<month></month>
<wday></wday>
<who>root</who>
<command></command>/usr/bin/nice -n20 /etc/rc.update_bogons.sh
<minute>/60</minute>
<hour></hour>
<mday></mday>
<month></month>
<wday></wday>
<who>root</who>
<command></command>/usr/bin/nice -n20 /usr/local/sbin/expiretable -v -t 3600 sshlockout
<minute>1</minute>
<hour>1</hour>
<mday></mday>
<month></month>
<wday></wday>
<who>root</who>
<command></command>/usr/bin/nice -n20 /etc/rc.dyndns.update
<minute>/60</minute>
<hour></hour>
<mday></mday>
<month></month>
<wday></wday>
<who>root</who>
<command></command>/usr/bin/nice -n20 /usr/local/sbin/expiretable -v -t 3600 virusprot
<minute>/60</minute>
<hour></hour>
<mday></mday>
<month></month>
<wday></wday>
<who>root</who>
<command></command>/usr/bin/nice -n20 /usr/local/sbin/expiretable -t 3600 snort2c
<minute>/5</minute>
<hour></hour>
<mday></mday>
<month></month>
<wday></wday>
<who>root</who>
<command></command>/usr/local/bin/checkreload.sh
<minute>/5</minute>
<hour></hour>
<mday></mday>
<month></month>
<wday></wday>
<who>root</who>
<command></command>/etc/ping_hosts.sh
<minute>/140</minute>
<hour></hour>
<mday></mday>
<month></month>
<wday>*</wday>
<who>root</who>
<command></command>/usr/local/sbin/reset_slbd.sh</cron>
<wol><installedpackages><miniupnpd><config><enable><iface_array><download><upload><overridewanip><logpackets><sysuptime><permdefault></permdefault></sysuptime></logpackets></overridewanip></upload></download></iface_array></enable></config></miniupnpd>
<package><name>Dashboard</name>
<descr>Adds pfSense dashboard that will be included with 1.3. This requires 1.2-BETA-2 or newer. WARNING! Cannot be deinstalled.</descr>
<category>System</category>
<config_file>http://www.pfsense.com/packages/config/dashboard/dashboard.xml</config_file>
<version>0.6.1</version>
<status>BETA</status>
<required_version>1.2-BETA-2</required_version>
<configurationfile>dashboard.xml</configurationfile></package>
<package><name>Developers</name>
<descr>Adds developers files such as GCC, etc to pfSense</descr>
<category>System</category>
<config_file>http://www.pfsense.com/packages/config/developers/developers.xml</config_file>
<version>0.1</version>
<status>BETA</status>
<required_version>1.2-BETA-2</required_version>
<configurationfile>developers.xml</configurationfile></package>
<package><name>phpSysInfo</name>
<website>http://phpsysinfo.sourceforge.net/</website>
<descr>PHPSysInfo is a customizable PHP Script that parses /proc, and formats information nicely. It will display information about system facts like Uptime, CPU, Memory, PCI devices, SCSI devices, IDE devices, Network adapters, Disk usage, and more.</descr>
<category>System</category>
<version>2.5.3</version>
<status>Beta</status>
<required_version>1.0</required_version>
<depends_on_package_base_url>http://www.pfsense.com/packages/All</depends_on_package_base_url>
<depends_on_package>mbmon-205_3.tbz</depends_on_package>
<config_file>http://www.pfsense.com/packages/config/phpsysinfo/phpsysinfo.xml</config_file>
<configurationfile>phpsysinfo.xml</configurationfile></package>
<package><name>pfflowd</name>
<website>http://www.mindrot.org/pfflowd.html</website>
<descr>pfflowd converts OpenBSD PF status messages (sent via the pfsync interface) to Cisco NetFlow datagrams. These datagrams may be sent (via UDP) to a host of one's choice. Utilising the OpenBSD stateful packet filter infrastructure means that flow tracking is very fast and accurate.</descr>
<category>Network Management</category>
<config_file>http://www.pfsense.com/packages/config/pfflowd.xml</config_file>
<depends_on_package_base_url>ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6-stable/All</depends_on_package_base_url>
<depends_on_package>pfflowd-0.6.tbz</depends_on_package>
<version>0.6</version>
<status>Stable</status>
<required_version>1.0</required_version>
<configurationfile>pfflowd.xml</configurationfile>
<maintainer>nick@buraglio.com</maintainer></package>
<package><name>ntop</name>
<website>http://www.ntop.org/</website>
<descr>ntop is a network probe that shows network usage in a way similar to what top does for processes. In interactive mode, it displays the network status on the user's terminal. In Web mode it acts as a Web server, creating an HTML dump of the network status. It sports a NetFlow/sFlow emitter/collector, an HTTP-based client interface for creating ntop-centric monitoring applications, and RRD for persistently storing traffic statistics.</descr>
<category>Network Management</category>
<depends_on_package_base_url>http://www.pfsense.org/packages/All/</depends_on_package_base_url>
<depends_on_package>ntop-3.2_2.tbz</depends_on_package>
<version>3.2_2</version>
<status>BETA</status>
<required_version>1.0</required_version>
<config_file>http://www.pfsense.com/packages/config/ntop.xml</config_file>
<configurationfile>ntop.xml</configurationfile></package>
<package><name>Lightsquid</name>
<descr>High perfomance web proxy Report. Required squid.</descr>
<website>http://lightsquid.sf.net/</website>
<category>Network</category>
<version>1.7.1_1</version>
<maintainer>dv_serg@mail.ru</maintainer>
<depends_on_package_base_url>http://ftp.lv.freebsd.org/pub/FreeBSD/ports/packages/All/</depends_on_package_base_url>
<depends_on_package>lightsquid-1.7.1_1.tbz</depends_on_package>
<status>Beta1</status>
<required_version>1.2</required_version>
<config_file>http://www.pfsense.com/packages/config/lightsquid/lightsquid.xml</config_file>
<configurationfile>lightsquid.xml</configurationfile></package>
<package><name>bandwidthd</name>
<website>http://bandwidthd.sourceforge.net/</website>
<descr>BandwidthD tracks usage of TCP/IP network subnets and builds html files with graphs to display utilization. Charts are built by individual IPs, and by default display utilization over 2 day, 8 day, 40 day, and 400 day periods. Furthermore, each ip address's utilization can be logged out at intervals of 3.3 minutes, 10 minutes, 1 hour or 12 hours in cdf format, or to a backend database server. HTTP, TCP, UDP, ICMP, VPN, and P2P traffic are color coded.</descr>
<category>System</category>
<version>2.0.1.1</version>
<status>BETA</status>
<required_version>1.0</required_version>
<depends_on_package_base_url>ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6.2-release/All/</depends_on_package_base_url>
<depends_on_package>bandwidthd-2.0.1.tbz</depends_on_package>
<config_file>http://www.pfsense.org/packages/config/bandwidthd/bandwidthd.xml</config_file>
<configurationfile>bandwidthd.xml</configurationfile></package>
<package><name>iperf</name>
<website>http://dast.nlanr.net/Projects/Iperf/</website>
<descr>Iperf is a tool for measuring maximum TCP and UDP bandwidth, reminiscent of ttcp and nettest. It has been written to overcome the shortcomings of those aging tools. Iperf can also test UDP bandwidth, loss, and jitter.</descr>
<category>Network Management</category>
<config_file>http://www.pfsense.com/packages/config/iperf.xml</config_file>
<depends_on_package_base_url>ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6-stable/All</depends_on_package_base_url>
<depends_on_package>iperf-2.0.2_1.tbz</depends_on_package>
<version>2.0.2_1</version>
<status>ALPHA</status>
<required_version>1.0</required_version>
<configurationfile>iperf.xml</configurationfile></package>
<package><name>squid</name>
<descr>High performance web proxy cache.</descr>
<website>http://www.squid-cache.org/</website>
<category>Network</category>
<version>2.6.5_1-p15</version>
<status>BETA</status>
<required_version>1.0</required_version>
<maintainer>fernando@netfilter.com.br seth.mos@xs4all.nl</maintainer>
<depends_on_package_base_url>http://www.pfsense.org/packages/All</depends_on_package_base_url>
<depends_on_package>squid-2.6.5.tbz</depends_on_package>
<depends_on_package>squid_radius_auth-1.0.8.tbz</depends_on_package>
<config_file>http://www.pfsense.org/packages/config/squid/squid.xml</config_file>
<configurationfile>squid.xml</configurationfile></package>
<package><name>darkstat</name>
<website>http://dmr.ath.cx/net/darkstat/</website>
<descr>darkstat is a network statistics gatherer. It's a packet sniffer that runs as a background process on a cable/DSL router, gathers all sorts of statistics about network usage, and serves them over HTTP.</descr>
<category>Network Management</category>
<depends_on_package_base_url>http://www.pfsense.org/packages/All/</depends_on_package_base_url>
<depends_on_package>darkstat-3.0.619.tbz</depends_on_package>
<depends_on_package>gettext-0.14.5_2.tbz</depends_on_package>
<version>3.0.619</version>
<status>Stable</status>
<required_version>1.0</required_version>
<maintainer>geekgod@geekgod.com</maintainer>
<config_file>http://www.pfsense.com/packages/config/darkstat/darkstat.xml</config_file>
<configurationfile>darkstat.xml</configurationfile></package>
<package><name>routed</name>
<descr>RIP v1 and v2 daemon - NOTE: As of 3/18/2007 this package is no longer necessary, it's included in pfSense base and will be removed when 1.0.1 is no longer the current release.</descr>
<website>http://www.pfsense.com/</website>
<maintainer>billm@pfsense.org</maintainer>
<category>Network Management</category>
<version>1.1</version>
<status>Stable</status>
<required_version>1.0</required_version>
<config_file>http://www.pfsense.com/packages/config/routed/routed.xml</config_file>
<configurationfile>routed.xml</configurationfile></package><menu>
<name>phpsysinfo</name>
<tooltiptext>Status
<url>/pkg_edit.php?xml=phpsysinfo.xml&id=0</url></tooltiptext> </menu><menu>
<name>pfflowd</name>
<tooltiptext>Modify pfflowd settings.</tooltiptext>
Services
<configfile>pfflowd.xml</configfile>
<url>/pkg_edit.php?xml=pfflowd.xml&id=0</url>
</menu><menu>
<name>ntop Settings</name>
<tooltiptext>Set ntop settings such as password and port.</tooltiptext>
Diagnostics
<url>/pkg_edit.php?xml=ntop.xml&id=0</url>
</menu><menu>
<name>ntop</name>
<tooltiptext>Access ntop</tooltiptext>
Diagnostics
<url>http://$myurl:3000</url>
<depends_on_service>ntop</depends_on_service>
</menu><menu>
<name>Proxy report</name>
<tooltiptext>Proxy server statistic report</tooltiptext>
Status
<url>/pkg_edit.php?xml=lightsquid.xml&id=0</url>
</menu><menu>
<name>BandwidthD</name>
<tooltiptext>Services
<url>/pkg_edit.php?xml=bandwidthd.xml&id=0</url></tooltiptext> </menu><menu>
<name>States New</name>
<tooltiptext>States by Paul Taylor</tooltiptext>
Diagnostics
<url>diag_new_states.php</url>
</menu><menu>
<name>iperf</name>
<tooltiptext>Run iperf in client or server mode.</tooltiptext>
Diagnostics
<configfile>iperf.xml</configfile>
</menu><menu>
<name>Proxy server</name>
<tooltiptext>Modify the proxy server's settings</tooltiptext>
Services
<url>/pkg_edit.php?xml=squid.xml&id=0</url>
</menu><menu>
<name>Darkstat Settings</name>
<tooltiptext>Setup darkstat specific settings</tooltiptext>
Diagnostics
<url>/pkg_edit.php?xml=darkstat.xml&id=0</url>
</menu><menu>
<name>RIP</name>
Services
<configfile>routed.xml</configfile>
<url>pkg_edit.php?xml=routed.xml&id=0</url>
</menu><phpsysinfo><config><hidepicklist><sensorprogram>on</sensorprogram>
<showmountpoint>on</showmountpoint>
<showinodes>on</showinodes>
<loadbar>on</loadbar>
<showerrors>on</showerrors></hidepicklist></config></phpsysinfo>
<service><name>pfflowd</name>
<rcfile>pfflowd.sh</rcfile>
<executable>pfflowd</executable></service>
<service><name>ntop</name>
<rcfile>ntop.sh</rcfile>
<executable>ntop</executable></service>
<service><name>bandwidthd</name>
<rcfile>bandwidthd.sh</rcfile>
<executable>bandwidthd</executable></service>
<service><name>iperf</name>
<executable>iperf</executable></service>
<service><name>squid</name>
<rcfile>squid.sh</rcfile>
<executable>squid</executable>
<description>Proxy server Service</description></service>
<service><name>darkstat</name>
<rcfile>darkstat.sh</rcfile>
<executable>darkstat</executable></service>
<ntop><config><password>dana</password>
<passwordagain>dana</passwordagain>
<interface_array>opt1</interface_array></config></ntop>
<bandwidthd><config><active_interface>opt1</active_interface>
<skipintervals>2</skipintervals>
<graphcutoff>3</graphcutoff>
<promiscuous>on</promiscuous>
<outputcdf>on</outputcdf>
<recovercdf>on</recovercdf>
<filter><drawgraphs>on</drawgraphs>
<meta_refresh>150</meta_refresh></filter></config></bandwidthd>
<darkstat><config><interface_array>opt1</interface_array></config></darkstat></installedpackages>
<revision><description>/interfaces_opt.php made unknown change</description>
<time>1192184466</time></revision>
<widgets><sequence>system_information-div:col1:show,carp_status-div:col1:close,cpu_graphs-div:col1:close,installed_packages-div:col1:close,interface_statistics-div:col1:show,interfaces-div:col1:show,ipsec-div:col2:close,load_balancer_status-div:col2:close,log-div:col2:close,services_status-div:col2:close,traffic_graphs-div:col2:show</sequence>
<traffic_graphs-config>WAN_graph-config:show,LAN_graph-config:hide,WLAN_1_graph-config:show,refreshInterval=3</traffic_graphs-config></widgets></wol></proxyarp></aliases></shaper></syslog></bridge></ovpn></bigpond></staticroutes></lastchange></pfsense></hostap> -
is there a resolution to this problem? …or should i just ignore these errors since i don't have any problems with connection speed or stability?
-
Hello covex and all,
I have got still many In/Out errors on WLAN(ath0),I tried wlan card in by another PCI slots.I have got reduction mini-PCI to PCI this http://www.i4wifi.cz/?cls=stoitem&stiid=190 and mini-PCI card CM9Please help me. Ladislav
WLAN1 interface (ath0)
Status associated
DHCP down
MAC address 00:0b:6b:4e:35:b5
Media autoselect mode 11g <hostap>Channel 6
SSID LadaWerneman3
In/out packets 4518/5459 (895 KB/3.82 MB)
In/out errors 72552/0
Collisions 0
Bridge (bridge0) learningathstats
3563 tx management frames
157 tx frames discarded prior to association
2 tx stopped 'cuz no xmit buffer
33 tx discarded empty frame
97 tx failed 'cuz FIFO underrun
25 long on-chip tx retries
831 tx failed 'cuz bogus xmit rate
122 tx frames with rts enabled
3511 tx frames with an alternate rate
515 tx frames with 11g protection and bursting
49652 rx failed 'cuz of FIFO overrun
5 rx failed 'cuz frame too short
3021 rx management frames
3624 beacon setup failed 'cuz no mbuf
379591708 beacons transmitted
35 periodic calibration failures
1 rate control checks
1 tx used alternate antenna
Antenna profile:
[2] tx 3617 rx 4607
[3] tx 3 rx 0configuration from shell
sysctl dev.ath.0
dev.ath.0.%desc: Atheros 5212
dev.ath.0.%driver: ath
dev.ath.0.%location: slot=15 function=0
dev.ath.0.%pnpinfo: vendor=0x168c device=0x0013 subvendor=0x185f subdevice=0x1012 class=0x020000
dev.ath.0.%parent: pci1
dev.ath.0.smoothing_rate: 95
dev.ath.0.sample_rate: 10
dev.ath.0.countrycode: 0
dev.ath.0.regdomain: 0
dev.ath.0.slottime: 20
dev.ath.0.acktimeout: 48
dev.ath.0.ctstimeout: 48
dev.ath.0.softled: 0
dev.ath.0.ledpin: 0
dev.ath.0.ledon: 0
dev.ath.0.ledidle: 2700
dev.ath.0.txantenna: 1
dev.ath.0.rxantenna: 1
dev.ath.0.diversity: 0
dev.ath.0.txintrperiod: 5
dev.ath.0.diag: 0
dev.ath.0.tpscale: 0
dev.ath.0.tpc: 0
dev.ath.0.tpack: 63
dev.ath.0.tpcts: 63
dev.ath.0.rfsilent: 1
dev.ath.0.rfkill: 1
dev.ath.0.monpass: 24</hostap> -
Same thing with my pfsense box using TP-LINK TL-WN551G (atheros 5212).
Tried changing transmit power, channel, diversity, rx/txantenna … got the same big amount of error packages.
The wifi card is working just fine under winxp. I suppose it's a driver issue. -
Now tried IPCOP using the same wifi card and everything works perfect 0/0 errors.
I'll be waiting for a future version with a better wifi driver, pfsense is just better than ipcop. -
Now tried IPCOP using the same wifi card and everything works perfect 0/0 errors.
I'll be waiting for a future version with a better wifi driver, pfsense is just better than ipcop.Try FreeBSD and submit a bug report to the respective list. This will help it get attention. Simply waiting will result in no action and you just hope that someone happens to fix whatever issue there is.
PS: 99% of the time the errors are caused by the antenna setting. Make sure it using the right antenna.
-
Now tried IPCOP using the same wifi card and everything works perfect 0/0 errors.
I'll be waiting for a future version with a better wifi driver, pfsense is just better than ipcop.Try FreeBSD and submit a bug report to the respective list. This will help it get attention. Simply waiting will result in no action and you just hope that someone happens to fix whatever issue there is.
PS: 99% of the time the errors are caused by the antenna setting. Make sure it using the right antenna.
I am having in/out errors on a Atheros 5212 based PCI card. Here is athstats
athstats
80321 tx management frames
1232 tx frames discarded prior to association
2 tx stopped 'cuz no xmit buffer
900 tx failed 'cuz FIFO underrun
24742 tx failed 'cuz bogus xmit rate
1138 tx frames with rts enabled
79321 tx frames with an alternate rate
5242 tx frames with 11g protection
151167 rx failed 'cuz of FIFO overrun
1 rx failed 'cuz frame too short
58247 rx management frames
51043 beacon setup failed 'cuz no mbuf
195044131 beacons transmitted
219 periodic calibration failures
1307 tx used alternate antenna
Antenna profile:
[2] tx 38946 rx 40764
[3] tx 41701 rx 36158I am trying to change the antenna settings, but it does not allow me to change it. Actually the rxantenna changes between 1 and 2 every so often:
sysctl dev.ath.0
dev.ath.0.%desc: Atheros 5212
dev.ath.0.%driver: ath
dev.ath.0.%location: slot=8 function=0
dev.ath.0.%pnpinfo: vendor=0x168c device=0x001a subvendor=0x1113 subdevice=0xee24 class=0x020000
dev.ath.0.%parent: pci1
dev.ath.0.smoothing_rate: 95
dev.ath.0.sample_rate: 10
dev.ath.0.countrycode: 0
dev.ath.0.regdomain: 96
dev.ath.0.slottime: 9
dev.ath.0.acktimeout: 23
dev.ath.0.ctstimeout: 23
dev.ath.0.softled: 0
dev.ath.0.ledpin: 0
dev.ath.0.ledon: 0
dev.ath.0.ledidle: 2700
dev.ath.0.txantenna: 0
dev.ath.0.rxantenna: 1
dev.ath.0.diversity: 0
dev.ath.0.txintrperiod: 5
dev.ath.0.diag: 0
dev.ath.0.tpscale: 0
dev.ath.0.tpc: 0
dev.ath.0.tpack: 63
dev.ath.0.tpcts: 63
dev.ath.0.monpass: 24sysctl dev.ath.0
dev.ath.0.%desc: Atheros 5212
dev.ath.0.%driver: ath
dev.ath.0.%location: slot=8 function=0
dev.ath.0.%pnpinfo: vendor=0x168c device=0x001a subvendor=0x1113 subdevice=0xee24 class=0x020000
dev.ath.0.%parent: pci1
dev.ath.0.smoothing_rate: 95
dev.ath.0.sample_rate: 10
dev.ath.0.countrycode: 0
dev.ath.0.regdomain: 96
dev.ath.0.slottime: 9
dev.ath.0.acktimeout: 23
dev.ath.0.ctstimeout: 23
dev.ath.0.softled: 0
dev.ath.0.ledpin: 0
dev.ath.0.ledon: 0
dev.ath.0.ledidle: 2700
dev.ath.0.txantenna: 0
dev.ath.0.rxantenna: 2
dev.ath.0.diversity: 0
dev.ath.0.txintrperiod: 5
dev.ath.0.diag: 0
dev.ath.0.tpscale: 0
dev.ath.0.tpc: 0
dev.ath.0.tpack: 63
dev.ath.0.tpcts: 63
dev.ath.0.monpass: 24When I try to change the antenna to 0, it keeps changing back to 1 and 2. Any help is greatly appreciated.
-
I'm curious, change your rxbug and txbuf to 2000 instead of 40 and 100 by default.
sysctl hw.ath
hw.ath.hal.version: 0.9.17.2
hw.ath.hal.dma_brt: 2
hw.ath.hal.sw_brt: 10
hw.ath.hal.swba_backoff: 0
hw.ath.dwell: 200
hw.ath.calibrate: 30
hw.ath.outdoor: 1
hw.ath.xchanmode: 1
hw.ath.countrycode: 0
hw.ath.regdomain: 0
hw.ath.rxbuf: 4000
hw.ath.txbuf: 4000 -
I try that tonight. Will let you know the results. Thanks
-
Hey GoldServe
How do I change the values? When I do sysctl hw.ath.txbuf=2000 it says
sysctl: oid 'hw.ath.txbuf' is read only
Same for the rxbuf
-
Thanks GoldServe
I added "hw.ath.txbuf=3000" and "hw.ath.rxbuf=6000" on loader.conf and almost no In/Out Errors. And the WiFi is rock solid. Thanks again.
-
Eh?? Please test for a while and report back. This is very interesting.
-
Eh?? Please test for a while and report back. This is very interesting.
Wifi is still working solid. No random disconnections.
In the last 24 hours I have only 180740/0 In/Out errors. Before the change, this number was at least 10 times larger.
Lets see if this works permanently.
-
The errors are creeping up again. Here is the latest athstat with rxbuf and txbuf at 3000 and 6000 respectively
athstats
9269 tx management frames
275 tx frames discarded prior to association
262 tx failed 'cuz FIFO underrun
2121 tx failed 'cuz bogus xmit rate
1754 tx frames with rts enabled
7519 tx frames with an alternate rate
212 tx frames with 11g protection
483679 rx failed 'cuz of FIFO overrun
2 rx failed 'cuz frame too short
4119 rx management frames
113640 beacon setup failed 'cuz no mbuf
614465541 beacons transmitted
410 periodic calibration failures
75 tx used alternate antenna
Antenna profile:
[2] tx 5749 rx 4174
[3] tx 3530 rx 2081Any suggestions? Also, the dev.ath.0.rxantenna keeps switching from 1 to 2 and back?
-
neonsigns, could you post your config file (sysctl)… or at least a section of it with wifi settings you did
i tried g and a, different settings from this thread and still getting tons of in/out errors (btw, "a" mode produces less of'em :-) -
sysctl hw.ath
hw.ath.hal.swba_backoff: 0
hw.ath.hal.sw_brt: 10
hw.ath.hal.dma_brt: 2
hw.ath.hal.version: 0.9.17.2
hw.ath.txbuf: 3000
hw.ath.rxbuf: 6000
hw.ath.regdomain: 0
hw.ath.countrycode: 0
hw.ath.xchanmode: 1
hw.ath.outdoor: 1
hw.ath.calibrate: 30
hw.ath.dwell: 200sysctl dev.ath.0
dev.ath.0.%desc: Atheros 5212
dev.ath.0.%driver: ath
dev.ath.0.%location: slot=8 function=0
dev.ath.0.%pnpinfo: vendor=0x168c device=0x001a subvendor=0x1113 subdevice=0xee24 class=0x020000
dev.ath.0.%parent: pci1
dev.ath.0.smoothing_rate: 95
dev.ath.0.sample_rate: 10
dev.ath.0.countrycode: 0
dev.ath.0.regdomain: 96
dev.ath.0.slottime: 9
dev.ath.0.acktimeout: 48
dev.ath.0.ctstimeout: 48
dev.ath.0.softled: 0
dev.ath.0.ledpin: 0
dev.ath.0.ledon: 0
dev.ath.0.ledidle: 2700
dev.ath.0.txantenna: 0
dev.ath.0.rxantenna: 1
dev.ath.0.diversity: 0
dev.ath.0.txintrperiod: 5
dev.ath.0.diag: 0
dev.ath.0.tpscale: 0
dev.ath.0.tpc: 0
dev.ath.0.tpack: 63
dev.ath.0.tpcts: 63
dev.ath.0.monpass: 24athstats
10033 tx management frames
522 tx frames discarded prior to association
498 tx failed 'cuz FIFO underrun
3071 tx failed 'cuz bogus xmit rate
2491 tx frames with rts enabled
7547 tx frames with an alternate rate
212 tx frames with 11g protection
1084420 rx failed 'cuz of FIFO overrun
3 rx failed 'cuz frame too short
4277 rx management frames
266364 beacon setup failed 'cuz no mbuf
1822425091 beacons transmitted
932 periodic calibration failures
77 tx used alternate antenna
Antenna profile:
[2] tx 6512 rx 4668
[3] tx 3542 rx 2093ifconfig -v ath0
ath0: flags=8943 <up,broadcast,running,promisc,simplex,multicast>mtu 1500
inet6 fe80::213:f7ff:fe1f:bffb%ath0 prefixlen 64 scopeid 0x2
ether 00:13:f7:1f:bf:fb
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>status: associated
ssid NWIFI channel 11 (2462) bssid xx:xx:xx:xx:xx:xx
authmode WPA1+WPA2/802.11i privacy MIXED deftxkey 3
TKIP 2:128-bit
TKIP 3:128-bit powersavemode OFF powersavesleep 100 txpowmax 33
txpower 63 rtsthreshold 2346 mcastrate 1 fragthreshold 2346 bmiss 7
pureg protmode OFF -wme burst ssid SHOW apbridge dtimperiod 1
bintval 100 -countermeasures</hostap></up,broadcast,running,promisc,simplex,multicast> -
can you please try by forcing the media manually?
-
I have read somewhere that in freebsd, you can disable te bgscan via ifconfig ath0 -bgscan but it's not available in 6.2. Maybe someone can port over 6.3 and see if this helps.
-
I've the same problem about tons of IN/OUT errors. I also have a wifi card based on Atheros 5212.
I've been trying pfSense with the new txbuf and rxbuf and disconnections happen 8-9 hours later the first association instead of every 2 hours as usually occurs without that change in /boot/loader.conf
In my case those parameters in loader.conf make less OUT errors and few IN errors, but unluckily it doesn't solve the problem. Disconnections shouldn't occur due to the short distance between pfSense wifi antenna and client one.
It has been a year wifi connection have disconnection every 2-3 hours :(
As I've said, today wifi connection lasted 9 hours and then disconnection. I bet it will get disconnected with 9 hours from now.
I tought about a problem with hostapd, but now I think that is more driver related.
Moreover, I've two configurations and all of them have wifi cards based on Atheros chipset from different producers: I have the same problem reported in this thread with them. :-\What can we do? My wifi cards aren't faulty and I think yours, too. How can we report this problem to the maintainer of FreeBSD wireless drivers? Developers, we need your help! ::)
-
Hi neonsigns and all,your /boot/loader.conf looks like this ?
autoboot_delay="1"
kern.ipc.nmbclusters="0"
"hw.ath.rxbuf=6000"
"hw.ath.txbuf=3000"