Static routes seemed that don't work if CP is active… why?
-
This is the problem.
- CP+Radius working 100%
- I add static routes.
- I login into CP and Internet is fully functional
- Static routes don't work. ping hosts on the others subnets don't work
then
- I turn off CP
- Internet is fully functional and ping host on the others subnets works!! so static routes works!!
why??? :-[ :'(
sorry about my poor english :P
-
Can you provide a traceroute when cp is turned off and when cp is turned on from a client behind the cp interface to such a host? Also please provide some networdiagram (can be in ascii) about the interfaces of the pfSense and the static route and so on?
-
Of course!!!
Static routes:
wan 10.4.0.0/16 10.100.0.4 (ISP VPN router) I change it to LAN and does the same
wan 172.20.0.0/16 10.100.0.3 (ISP VPN router) I change it to LAN and does the sameifconfig:
lan ip 10.1.3.254/16
wan ip 10.100.0.254/16Tracert is ok when CP is off (10.1.3.254, 10.100.0.254, 10.100.0.4,…,10.4.0.1) but when is on, the packets dont cross to 10.100.0.254, only to 10.1.3.254
No rules on firewall, only defaults10.100.0.1 (Internet) 10.100.0.2 (ISP VPN VoIP) 10.100.0.3 (ISP VPN) 10.100.0.4 (ISP VPN)
| | | |
| | | |
-------------------------------------|------------------------------------
|
10.100.0.254
pfSense
10.1.3.254
|
|
LAN 10.1.0.0/16thanks a lot ;)
-
Can you try a traceroute from the webgui? I guess that one will work regardless of the cp being enabled? It only fails when behind the cp enabled interface, right?
-
Yes! it's work from the webgui. Only hosts on the LAN don't work…
-
:'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'(
-
no solution?? :(
So, I can't use CP…
Anyone have the same problem???