Traffic shaper changes [90% completed, please send money to complete bounty]

tomdchi · Jul 16, 2008, 5:50 PM

bug?

I have am trying to use the penalty box feature and added an alias to it during the wizard setup. It does not look like that it is working. The penalty box used to have its own que and I finaly noticed that it was added to the qotherslow. I am not seeing any traffic going through this que even though there are people using ip's associated with the alias.
Anything special I need to do?

Thanks,
Tom

eri-- · Jul 16, 2008, 6:20 PM

Try to see if you are overridng the selection with a policy/rule on the interfaces tab.
Since the wizard creates a ruleset but you have to be careful when adding rules on the interfaces since they override every rule on the floating tab that does not have quick checked.

Read previous posts where i go in detail about this.
If you are doing this for optional interfaces too please check posts before cause you need to apply a fix for that
till the new update goes out after the move to FreeBSD 7 has settled.

Ermal

tomdchi · Jul 17, 2008, 1:30 AM

That was it! I missed the quick part in reading the posts.

Thanks!
Tom

JustinHoMi · Aug 2, 2008, 6:39 PM

Could the total bounties received be posted in the first post?

What will be required to get this included in pfsense 1.2.1?

dvserg · Aug 3, 2008, 5:14 PM

@JustinHoMi:

Could the total bounties received be posted in the first post?

What will be required to get this included in pfsense 1.2.1?

You can look 1.2.1 beta

JustinHoMi · Aug 5, 2008, 10:38 PM

Huh?

trendchiller · Aug 10, 2008, 6:44 PM

1.2.1 will be a version to fix up the bugs from 1.2 and introduce FreeBSD 7

No features will be added…

far182 · Aug 12, 2008, 5:53 AM

I would love to contribute. Can I get a confirmation that there is an embedded version of the new shaper for people who contribute?

eri-- · Aug 12, 2008, 8:48 AM

yes.

far182 · Aug 12, 2008, 2:49 PM

This sounds great. Also, at some point will this make it into the public product? Or will this always be private?

eri-- · Aug 12, 2008, 2:56 PM

You decide :P read before posting just showing respect for an endless thread going more endless.

This thread is the only documentation available about the new shaper and buring it with posts is not doing any good.

far182 · Aug 13, 2008, 9:58 PM

I just sent $100 to paypal@chrisbuechler.com. Looking forward to the PM with instructions on where to get the new shaper. :)

I know it's a small token, but I will try to help and contribute more when I can. Personally, I would like to see this made available to everyone. This way it can be tested and improved faster. Personally, I will be testing this on my home Embedded router with 1.2 Release. My ultimate goal would be to set this up in our work production environment (many locations). I would prefer to wait until it's in a RELEASE version before putting it into production.

What kind of donation would be big enough to make this public and part of the RELEASE? Basically, very very very stable. I might be able find some contributors.

I have read through every thread on this post, but for testing I was hoping I might get some help with configuring for my test environment. Please let me know how it's recommended to configure the shaping using my setup. I have a ALIX3 with LAN, WAN, and WIFI. I have a 6mb/768Kb DSL. Right now I have the WIFI disabled as I was warned that shaping doesn't work with 3 interfaces. Right now (with 1.2 RELEASE) I have a nice shaping configuration for my LAN & WAN. Basically VOIP is put on highest priority. I have also put all HTTP/HTTPS traffic into another queue and made it low priority. Here is my config (attached):

P.S. I want to bridge my WIFI with my LAN.

Thank You!

djamp42 · Aug 14, 2008, 3:49 PM

I think I can throw some money into this if..

Traffic Shaper works with MultiWAN

And

Captive Portal works with MultiWAN

Also

I need to be able to load share across uneven links, (Cable modem, and a T1 for example).

Also fail over of traffic should one link go down be automatic.

Let me know if this is possible and I'll see what i can offer.

Adam

heiko · Aug 14, 2008, 5:19 PM

I hope, Ermal will released a new build, if 1.21 is out and stable…. :)

JustinHoMi · Aug 15, 2008, 1:30 AM

@far182:

What kind of donation would be big enough to make this public and part of the RELEASE? Basically, very very very stable. I might be able find some contributors.

I would like to hear an answer to this question too.

far182 · Aug 15, 2008, 5:20 AM

Well I guess my paypal account (verified one) lost my credit card I had in there. So it's waiting until my eCheck clears on the 18th for the $100. Bottom line is that the $100 is on it's way. For now, I added my credit card back in (into paypal) and just donated another $25 via PayPal. It says it's been sent.

Thanks again for the fantastic work! I look forward to access to the updated image. I get a new PFSense ALIX box tomorrow and would love to be able to load it up with the new stuff.

Thank You

far182 · Aug 20, 2008, 11:59 PM

Hi Ermal.

Anychance I can get the new shaper tonight? That would be great!

Thank You

djmizt · Aug 21, 2008, 1:49 AM

Ermal

can you post the current build date ..im running on build date Mar 18 21:13:51 UTC 2008

I know this is way behind but this is what i got from your old pm for the link

can you pm me the new link ..non of my shaping is working and I dont want to fudge it too much because its a production box ..i have a test box now that i can load any new builds ..thanks

eri-- · Aug 25, 2008, 9:46 PM

I was on vacation and will update you all soon.

kapara · Aug 27, 2008, 7:53 AM

Contributed $50. I have no real need for it but would like to play with the functionality. Thanks for the effort. It looks like this feature has really helped many people here.