Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Problem ppoe

    Scheduled Pinned Locked Moved
    1.2.3-PRERELEASE-TESTING snapshots - RETIRED
    11
    19
    10.2k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • H
      hrun
      last edited by

      Hi
      update to pfSense-Full-Update-1.2.3-20090218-2009
      cannot access internet using Ppoe anymore

      Feb 19 07:51:29 	kernel: sk0: link state changed to DOWN
Feb 19 07:51:28 	mpd: mpd: process 1883 terminated
Feb 19 07:51:26 	mpd: mpd: caught fatal signal term
Feb 19 07:51:26 	mpd: Warning: no secret for "BS105" found
Feb 19 07:51:26 	mpd: Using authname "BS105"
Feb 19 07:51:26 	mpd: Name: "BS105"
Feb 19 07:51:25 	php: /interfaces_wan.php: foreach if is wan
Feb 19 07:51:25 	php: /interfaces_wan.php: foreach if is lan
Feb 19 07:51:22 	mpd: Warning: no secret for "BS105" found
Feb 19 07:51:22 	mpd: Using authname "BS105"
      1 Reply Last reply Reply Quote 0
      • P
        patrickc
        last edited by

        I got hit with that this morning myself.
        I'm on the livecd for the stable version now and in comparing
        /var/etc/mpd.conf

        i see on the livecd

        set bundle authname "medonthackme@att.net"
        set bundle password "h4x0rsupREEM"

        my /var/etc/mpd.conf on my 1.2.3 used "set auth" and system logs showed that's not a valid command.
        I'm going to edit my mpd.conf and see if i can drop and reload the interface.

        my mpd.conf keeps getting overwritten, i'd like to find the source php script or whatever function writes to this file so i can change it there.
        still new to pfsense but loving it!

        ..i'll be back

        1 Reply Last reply Reply Quote 0
        • J
          jaybird
          last edited by

          Hi, it happened to me too. I can not connect to the Internet via PPPoE anymore since I installed yesterday’s and today’s pfSense-1.2.3.-Snapshots on my box. The earlier Snapshots worked just fine, though. Getting back to one of them solves the problem for me, but I am interested in a more future-oriented general solution for this shortcomings.

          I started testing those 1.2.3 snapshots in early February. Here I finally found a firewall distribution that worked out-of-the-box on my mini-itx computer based on the im-945gse-a motherboard. Other distributions, IPCop, Endian, SmoothWall to name a few, just failed to install or refused to work on my system, because they driver-wise lacked support for some hardware components. Seemingly the ethernet controllers and sata devices aren’t fully supported by linux-based and pre-FreeBSD-7.1 firewall distributions yet. FreeBSD 7.1 and pfSense 1.2.3 respectively did the trick for me – for some time at least.

          I kept my 1.2.3 pfSense box up to date, updating to the latest snapshot daily. Meanwhile I tried to learn by doing and by some googleing how to set up firewall rules, squid, squidguard and so on. Everything worked just fine based on all the snapshots I tried out till February 11.

          But: Since I upgraded from pfSense-1.2.3-20090211-1551 to the newer snapshots from February 18 and 19 my pfSense-Router/Firewall fails to connect to the Internet via PPPoE. My PPPoE configuration does not seem to be faulty. I kept it the same anyway and that way it worked perfectly on any 1.2.3.-Snapshot released before February 18.

          Since I am new to pfSense and FreeBSD I would appreciate any hints about which system-log-data I should post to help in trouble-shooting this issue.

          1 Reply Last reply Reply Quote 0
          • Y
            Yuregir
            last edited by

            Yes i have same problem too, i cannot connect pppoe, the service provider says username and password is wrong, when i connect my ethernet to laptop i can connect pppoe successfully.
            I downgraded to 1.2.2 now

            Regards
            Yuregir

            1 Reply Last reply Reply Quote 0
            • J
              jaybird
              last edited by

              Hi, the PPPoE problem persists. I just uploaded the firmware pfSense-Full-Update-1.2.3-20090223-1231 to my pfSense-1.2.3-snapshots-testing-box. As a consequence of this upgrade my PPPoE connection gets disconnected and I can not bring it up anymore.

              While the PPPoe connection refuses to work with that February 23 pfSense-1.2.3-Snapshot, in my system log appear these two lines, obviously concerning an authentication problem:

              mpd: mpd: empty auth name

              mpd: Warning: no secret for "" found

              I edited /var/etc/mpd.conf – there I find two lines concerning my authname and password. My Username and Password do appear here exactly and correctly like I wrote them into the PPPoE configuration menu for the WAN Interface.

              PPPoE connection worked with earlier snaphots up to pfSense-1.2.3-20090211-1551. So I compared my mpd.conf. from February 11 to that of February 23. They differ in just two lines.

              set bundle authname "my_adsl_username#0001@t-online.de"
              set bundle password "my_adsl_password" (Feb 11)

              set auth authname "my_adsl_username#0001@t-online.de"
              set auth password "my_adsl_password" (Feb 23)

              Any hints how to solve this PPPoE / MPD / WAN configuration issue or at least how to help in solving it are welcome.

              Regards,

              jaybird

              WAN interface (em1) Status up
              PPPoE down

              Media 10baseT/UTP <half-duplex>In/out packets 70/236 (4 KB/8 KB)
              In/out errors 0/0
              Collisions 0

              Last 50 system log entries

              Feb 23 20:59:17 mpd: AUTHPROTO PAP
              Feb 23 20:59:17 mpd: MAGICNUM 3783f113
              Feb 23 20:59:17 mpd: MRU 1492
              Feb 23 20:59:17 mpd: AUTHPROTO PAP
              Feb 23 20:59:17 mpd: MAGICNUM 3783f113
              Feb 23 20:59:17 mpd: MRU 1492
              Feb 23 20:59:17 mpd: MAGICNUM 692e687b
              Feb 23 20:59:17 mpd: mpd: empty auth name
              Feb 23 20:59:17 mpd: Warning: no secret for "" found
              Feb 23 20:59:19 mpd: mpd: empty auth name
              Feb 23 20:59:19 mpd: Warning: no secret for "" found
              Feb 23 20:59:21 mpd: mpd: empty auth name
              Feb 23 20:59:21 mpd: Warning: no secret for "" found
              Feb 23 20:59:56 php: /interfaces_wan.php: foreach if is lan
              Feb 23 20:59:56 php: /interfaces_wan.php: foreach if is wan
              Feb 23 20:59:58 mpd: mpd: caught fatal signal term
              Feb 23 21:00:00 mpd: mpd: process 251 terminated
              Feb 23 21:00:02 mpd: mpd: pid 1122, version 3.18 (root@freebsd7-releng_1_2_3-pre-testing.pfsense.org 17:34 22-Feb-2009)
              Feb 23 21:00:02 kernel: em1: link state changed to DOWN
              Feb 23 21:00:02 mpd: set auth: unknown command. Try "help".
              Feb 23 21:00:02 mpd: set auth: unknown command. Try "help".
              Feb 23 21:00:04 kernel: em1: link state changed to UP
              Feb 23 21:00:07 check_reload_status: rc.linkup starting
              Feb 23 21:00:17 mpd: MRU 1492
              Feb 23 21:00:17 mpd: MAGICNUM 89e4aa92
              Feb 23 21:00:17 mpd: MRU 1492
              Feb 23 21:00:17 mpd: AUTHPROTO PAP
              Feb 23 21:00:17 mpd: MAGICNUM 7905e29a
              Feb 23 21:00:17 mpd: MRU 1492
              Feb 23 21:00:17 mpd: AUTHPROTO PAP
              Feb 23 21:00:17 mpd: MAGICNUM 7905e29a
              Feb 23 21:00:17 mpd: MRU 1492
              Feb 23 21:00:17 mpd: MAGICNUM 89e4aa92
              Feb 23 21:00:17 mpd: mpd: empty auth name
              Feb 23 21:00:17 mpd: Warning: no secret for "" found
              Feb 23 21:00:19 mpd: mpd: empty auth name
              Feb 23 21:00:19 mpd: Warning: no secret for "" found
              Feb 23 21:00:21 mpd: mpd: empty auth name
              Feb 23 21:00:21 mpd: Warning: no secret for "" found
              Feb 23 21:00:33 check_reload_status: reloading filter
              Feb 23 21:00:34 dnsmasq[466]: exiting on receipt of SIGTERM
              Feb 23 21:00:35 dnsmasq[1396]: started, version 2.45 cachesize 150
              Feb 23 21:00:35 dnsmasq[1396]: compile time options: IPv6 GNU-getopt BSD-bridge ISC-leasefile no-DBus no-I18N TFTP
              Feb 23 21:00:35 dnsmasq[1396]: no servers found in /etc/resolv.conf, will retry
              Feb 23 21:00:35 dnsmasq[1396]: no servers found in /etc/resolv.conf, will retry
              Feb 23 21:00:35 dnsmasq[1396]: read /etc/hosts - 2 addresses
              Feb 23 21:00:36 dhcpd: Internet Systems Consortium DHCP Server V3.0.5
              Feb 23 21:00:36 dhcpd: Copyright 2004-2006 Internet Systems Consortium.
              Feb 23 21:00:36 dhcpd: All rights reserved.
              Feb 23 21:00:36 dhcpd: For info, please visit http://www.isc.org/sw/dhcp/

              /var/etc/mpd.conf

              pppoe:
              new -i ng0 pppoe pppoe
              set iface route default
              set iface disable on-demand
              set iface idle 0
              set iface up-script /usr/local/sbin/ppp-linkup
              set bundle disable multilink
              set auth authname "my_adsl_username#0001@t-online.de"
              set auth password "my_adsl_password"
              set bundle no noretry
              set link keep-alive 10 60
              set link max-redial 0
              set link no acfcomp protocomp
              set link disable pap chap
              set link accept chap
              set link mtu 1492
              set ipcp yes vjcomp
              set ipcp ranges 0.0.0.0/0 0.0.0.0/0
              set ipcp enable req-pri-dns
              set ipcp enable req-sec-dns
              open iface</half-duplex>

              1 Reply Last reply Reply Quote 0
              • Y
                Yuregir
                last edited by

                maybe  changing  "set auth" to "set bundle" in mpd.conf work

                set bundle authname "my_adsl_username#0001@t-online.de"
                set bundle password "my_adsl_password"
                ?

                1 Reply Last reply Reply Quote 0
                • J
                  jaybird
                  last edited by

                  Hi,

                  it seems like the new interfaces.inc file was to blame. I have just changed these lines in my interfaces.inc – /etc/inc/interfaces.inc --.

                  Where it said:

                  set auth

                  I changed it "back" to:

                  set bundle

                  After applying this somewhat quick & dirty change to the interfaces.inc file, PPPoE connection works again on today's 1.2.3-snapshot!

                  Regards,
                  jaybird

                  1 Reply Last reply Reply Quote 0
                  • J
                    jaybird
                    last edited by

                    Hi again,

                    I have just re-applied my previously posted workaround for that PPPoE problem to the newest snapshot I could get:

                    pfSense-Full-Update-1.2.3-20090223-1749

                    Yes, it works.

                    Bringing the PPPoE connection up again involved the following:

                    Diagnostics: Edit File

                    Save/Load from path: /etc/inc/interfaces.inc

                    Now looking for lines saying:

                    set auth

                    (I found four "set auth" lines in my interfaces.inc)

                    Then changing every instance of set auth in interfaces.inc to:

                    set bundle

                    Save these changes to: /etc/inc/interfaces.inc

                    Interfaces: WAN

                    PPPoE configuration

                    save

                    (Yes, save it again.)

                    Status: Interfaces

                    PPPoE

                    connect

                    (waiting some 30 seconds…)

                    Done!

                    And accordingly (things change back to):

                    WAN interface (em1) 
                    Status up 
                    PPPoE up

                    Loaded text from /var/etc/mpd.conf

                    pppoe:
                    new -i ng0 pppoe pppoe
                    set iface route default
                    set iface disable on-demand
                    set iface idle 0
                    set iface up-script /usr/local/sbin/ppp-linkup
                    set bundle disable multilink
                    set bundle authname "my_adsl-username#0001@t-online.de"
                    set bundle password "my_adsl_password"
                    set bundle no noretry
                    set link keep-alive 10 60
                    set link max-redial 0
                    set link no acfcomp protocomp
                    set link disable pap chap
                    set link accept chap
                    set link mtu 1492
                    set ipcp yes vjcomp
                    set ipcp ranges 0.0.0.0/0 0.0.0.0/0
                    set ipcp enable req-pri-dns
                    set ipcp enable req-sec-dns
                    open iface

                    Any suggestions, feedback or comments on this issue is most welcome. I wonder if some of you tried that trick described above, and if there are known yet better solutions for the PPPoE problem at this time.

                    Regards,
                    jaybird

                    1 Reply Last reply Reply Quote 0
                    • G
                      grandrivers
                      last edited by

                      worked like a charm for me nice to have ppoe back agin

                      pfsense 2.4 super micro A1SRM-2558F
                      C2558 8gig ECC  60gig SSD
                      tripple Wan dual pppoe

                      1 Reply Last reply Reply Quote 0
                      • S
                        ssbaksa
                        last edited by

                        Confirmed. It works now.

                        Sasa

                        1 Reply Last reply Reply Quote 0
                        • Y
                          Yuregir
                          last edited by

                          im glad its working
                          thanks jaybird

                          1 Reply Last reply Reply Quote 0
                          • P
                            podilarius
                            last edited by

                            Had the sma problem and this fixed the issue. Could a dev fix this in the code?

                            1 Reply Last reply Reply Quote 0
                            • A
                              andrewpc
                              last edited by

                              also had this problem in latest snapshot.  workaround implemented in interfaces.inc while waiting for fix. Thanks

                              1 Reply Last reply Reply Quote 0
                              • C
                                cmb
                                last edited by

                                Fixed, thanks.

                                1 Reply Last reply Reply Quote 0
                                • P
                                  pipis9242
                                  last edited by

                                  I want to  report that using :

                                  1.2.3-PRERELEASE-TESTING-VERSION
                                  built on Thu Mar 5 07:23:55 EST 2009

                                  the problem persists , in order the situation to  be fixed you have to edit /etc/inc/interfaces.inc
                                  and change set auth instances to  set bundle

                                  so the fix AINT WORKING

                                  1 Reply Last reply Reply Quote 0
                                  • S
                                    saintpaul
                                    last edited by

                                    @pipis9242:

                                    1.2.3-PRERELEASE-TESTING-VERSION
                                    built on Thu Mar 5 07:23:55 EST 2009

                                    so the fix AINT WORKING

                                    Try again with

                                    1.2.3-PRERELEASE-TESTING-VERSION
                                    built on Fri Mar 6 17:16:59 EST 2009

                                    It seems the patch was first applied to that version. I had the same problems with the version you mentioned, but the latest build fixed it.

                                    1 Reply Last reply Reply Quote 0
                                    • C
                                      cmb
                                      last edited by

                                      @pipis9242:

                                      I want to  report that using :

                                      1.2.3-PRERELEASE-TESTING-VERSION
                                      built on Thu Mar 5 07:23:55 EST 2009

                                      the problem persists , in order the situation to  be fixed you have to edit /etc/inc/interfaces.inc
                                      and change set auth instances to  set bundle

                                      so the fix AINT WORKING

                                      Yes it is working. Evidently I needed to state that I didn't go back in time to fix it, look at the time of my post and the time of your snapshot… Changes aren't going to magically appear in snapshots that were built 14-15 hours prior.

                                      1 Reply Last reply Reply Quote 0
                                      • P
                                        pipis9242
                                        last edited by

                                        YES IT IS WORKING :)

                                        a. SaintPaul : thank you  for your suggestion

                                        I tried : 1.2.3-PRERELEASE-TESTING-VERSION
                                                    built on Sat Mar 7 02:11:11 EST 2009

                                        and works fine

                                        b. cmb : thank you for your fix , I appreciate your efforts, concerning "Changes aren't going to magically appear in snapshots that were built 14-15 hours prior" , consider that Internet is Global and there is a term called "time difference" , the thing i did after reading your post in this thread was to test the latest available snapshot, sorry if i was misunderstood.

                                        1 Reply Last reply Reply Quote 0
                                        • P
                                          podilarius
                                          last edited by

                                          Thank you very much cmb.

                                          1 Reply Last reply Reply Quote 0
                                          • First post
                                            Last post