Make an wifi network (opt adapter)
-
I am having the hardest time getting an OPT network getting to the internet.
I am running version 1.2.3-RC1 built on Fri Apr 17 20:57:54 EDT 2009, I am posting here because this is working with 1.2.3 as far as I know.my pfsense has 4 nics: LAN (192.168.1.1), WAN (DHCP), WAN2 (DHCP), and OPT2 (10.0.0.1). I have internet access on LAN with load balancing.
LAN can ping OPT2 | OPT2 can ping LAN. My OPT2 Clients can even resolve DNS Names.OPT2 Client example IP address settings are: 10.0.0.x with sub net mask 255.255.255.0, default gateway 10.0.0.1, and DNS server 10.0.0.1
below are example of my firewall settings for a visual understanding.
Sorry its such a noob question but I can't seem to get any internet connectivity on the OPT2, I can only ping hosts on the LAN at most. To add to it, if I enable Squid transparently on the OPT2 address then I can access internet sites.
![lan firewall.JPG](/public/imported_attachments/1/lan firewall.JPG)
![lan firewall.JPG_thumb](/public/imported_attachments/1/lan firewall.JPG_thumb)
![wifi firewall.JPG](/public/imported_attachments/1/wifi firewall.JPG)
![wifi firewall.JPG_thumb](/public/imported_attachments/1/wifi firewall.JPG_thumb) -
Did you set the Advanced outbound NAT settings to manual?
-
Need to allow DHCP for your Wireless Interface
http://forum.pfsense.org/index.php/topic,11300.0.html
![Picture 1.png](/public/imported_attachments/1/Picture 1.png)
![Picture 1.png_thumb](/public/imported_attachments/1/Picture 1.png_thumb) -
Thank you. Got it working.