WebConfigurator
-
ISP DNS www.test.com (for examle)
^
|
|
Wan public IP
^
|
|
|
pfsense <–-LAN 192.168.1.1/24
^
|sys
|
DMZ 192.168.2.1/24www.test.com have public IP tha is set as WAN port IP
on pfsense there is NAT for web server 192.168.2.2 <-> public ipfrom outside I can open web site using public IP
But from DMZ or LAN i get the webConfigurator doesn't matter i type Public IP/. hOW TO LOCK OPENING CONFIGURATOR when i type public IP in LAN net in browser?
Thank you
-
Check your Firewall > Rules
jigp
Davao City -
rulea are ok - allowing everything
I found solution - http://forum.pfsense.org/index.php?topic=4818.0
-
Inform me if you got it working :)
jigp
Davao City -
I changed port to 8080 and protocol to https.
when i typeing public IP in browser my site is not working. I need to type internal address os apache server and only then i get my site.It's little it sad becoause I use ISP's DNS and when I typing www.test.com it resolves public IP and not opnening site as described above. But :) still it is not opnening webConfigurator and I am half glad ))))).
-
How do you do this:
@Mabbus:on pfsense there is NAT for web server 192.168.2.2 <-> public ip
port forwarding or one-to-one nat?
If port forwarding then make sure "Disable NAT Reflection" is not checked in System->Advanced. -
Hows it working mabbus? Be sure your NAT is doing okay. Also try restarting firewall.
jigp
Davao City