Website behind PFsense firewall not visable from the internet
-
I hope there is someone that can help me
I have the following setup
static IP from my ISP
modem which routes all traffic to the PFsense box IP adres 10.0.0.13
connected to the PFsense box with two subnets
my LAN IP range from 192.168.1.x
and a DMZ IP range from 192.168.2.x
I have setup the firewall NAT
Port forwarding
WAN TCP 25 (SMTP) 192.168.2.10 (ext.: 10.0.0.13) 25 (SMTP)
WAN TCP 80 (HTTP) 192.168.2.10 (ext.: 10.0.0.13) 80 (HTTP)
WAN TCP 21 (FTP) 192.168.2.10 (ext.: 10.0.0.13) 21 (FTP)1:1
WAN 10.0.0.13/32 192.168.2.10/32 dmzthe Firewall rules
WAN
- RFC 1918 networks * * * * * Block private networks
- Reserved/not assigned by IANA * * * * * Block bogon networks
TCP * * 192.168.2.10 25 (SMTP) * NAT
TCP * * 192.168.2.10 80 (HTTP) * NAT
TCP * * 192.168.2.10 21 (FTP) * NAT
DMZ
TCP/UDP DMZ net * 195.121.1.34 53 (DNS) *
TCP/UDP DMZ net * 195.121.1.66 53 (DNS) *I enabled the NAT reflection
But the website with ip adress 192.168.2.10 isn't visable from the internet
I can see it from my lan
Can somebody please tell me what i did wrongMartin
-
the Firewall rules
WAN
- RFC 1918 networks * * * * * Block private networks
Turn this off in the WAN settings page and try again.
db
-
removed that rule
still nothing -
Is your modem doing NAT? Then you will have to tell the modem to forward those same ports to internal IP address 10.0.0.13 as well.
By the way, I don't think this is your issue, but 1:1 automatically forwards every incoming port to a single internal IP, so it's redundant to forward certain ports when 1:1 is set up for the same server.
db
-
Oke found the problem
I hard resetted the modem and now everything works fineThanks for the reply's