Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    OPT1 to LAN bridge broken in nano image 20/08/09 + missing getopt for athctrl.sh

    1.2.3-PRERELEASE-TESTING snapshots - RETIRED
    2
    3
    2.1k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • D
      df
      last edited by

      I'm using pfSense-1.2.3-2g-20090820-1453-nanobsd.img
      Testing with two alix 2D3 + cm9 and 2D3 + dcma82, bios 0.99h

      First, i noticed that athctrl.sh misses getopt ..

      Second, assume you set OP1(WLAN) as bridged to LAN, having approriate rule to allow all from WLAN to ANY, than wireless clients get an IP adress (either from pfsense, if dhcpd is enabled on LAN, or from another dhcpd on the LAN); wireless clients can ping any hosts on LAN, connect to them (ie ssh to LAN unixes), but they cannot access any services on the pfsense server (cannot access the gui, cannot get dns resolver, cannot reach any "outside of LAN" hosts)

      WLAN config is pretty simple: hostap mode, wpa2, allow intra-BSS, channel 3, ifconfig on pfsense reports ath0 as "associated"

      Now, if i simply revert the bridge to normal static ip mode for the WLAN interface, than everything works as expected ..

      Can someone try to reproduce the setup and report your findings ?

      (Ans possibly add getopt to next snapshots ;)

      Best regards.

      1 Reply Last reply Reply Quote 0
      • C
        cmb
        last edited by

        I asked Scott to add getopt.

        Paste the contents of ifconfig while bridged

        1 Reply Last reply Reply Quote 0
        • D
          df
          last edited by

          Aha, i had, by some unknown way (and trust me i tried to figure how) managed last sunday to get the brdige running .. and it did, untill tonight
          The alix did not reboot in between, but same behaviour :
          I can reach my servers on LAN fine, but i cannot ping nor traceroute to the pfsense LAN IP
          Therefore, i have no access to the net .. since i cannot reach the gw …

          Note :
          Alix 2D3 (bios 0.99h)
          Same snapshot as before
          dhcpd is enabled on LAN
          WLAN (OPT2, ath0) bridged to LAN (vr0)
          WAN on vr2, static IP
          PPTPD on WAN

          Below is my ifconfig:

          vr0: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
          options=280b <rxcsum,txcsum,vlan_mtu,wol_ucast,wol_magic>ether 00:0d:b9:15:69:0c
          inet 10.0.33.254 netmask 0xffffff00 broadcast 10.0.33.255
          inet6 fe80::20d:b9ff:fe15:690c%vr0 prefixlen 64 scopeid 0x1
          media: Ethernet autoselect (100baseTX <full-duplex>)
          status: active
          vr1: flags=8802 <broadcast,simplex,multicast>metric 0 mtu 1500
          options=280b <rxcsum,txcsum,vlan_mtu,wol_ucast,wol_magic>ether 00:0d:b9:15:69:0d
          media: Ethernet autoselect (none)
          status: no carrier
          vr2: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
          options=280b <rxcsum,txcsum,vlan_mtu,wol_ucast,wol_magic>ether 00:0d:b9:15:69:0e
          inet6 fe80::20d:b9ff:fe15:690e%vr2 prefixlen 64 scopeid 0x3
          inet xxx.xxx.xxx.xxx netmask 0xffffff00 broadcast 82.235.179.255
          media: Ethernet autoselect (100baseTX <full-duplex>)
          status: active
          ath0: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
          ether 00:0b:6b:2d:e6:7e
          inet6 fe80::20b:6bff:fe2d:e67e%ath0 prefixlen 64 scopeid 0x4
          media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>status: associated
          ssid Dune channel 3 (2422 Mhz 11g) bssid 00:0b:6b:2d:e6:7e
          authmode WPA1+WPA2/802.11i privacy MIXED deftxkey 3 TKIP 2:128-bit
          TKIP 3:128-bit txpower 31.5 scanvalid 60 bgscan bgscanintvl 300
          bgscanidle 250 roam:rssi11g 7 roam:rate11g 5 protmode RTSCTS burst
          dtimperiod 1
          pflog0: flags=100 <promisc>metric 0 mtu 33204
          pfsync0: flags=41 <up,running>metric 0 mtu 1460
          pfsync: syncdev: lo0 syncpeer: 224.0.0.240 maxupd: 128
          enc0: flags=41 <up,running>metric 0 mtu 1536
          lo0: flags=8049 <up,loopback,running,multicast>metric 0 mtu 16384
          inet 127.0.0.1 netmask 0xff000000
          inet6 ::1 prefixlen 128
          inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8
          bridge0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
          ether ee:c3:50:ff:1b:65
          id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
          maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200
          root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
          member: vr0 flags=143 <learning,discover,autoedge,autoptp>ifmaxaddr 0 port 1 priority 128 path cost 200000
          member: ath0 flags=143 <learning,discover,autoedge,autoptp>ifmaxaddr 0 port 4 priority 128 path cost 370370
          ng0: flags=8890 <pointopoint,noarp,simplex,multicast>metric 0 mtu 1500
          ng1: flags=8890 <pointopoint,noarp,simplex,multicast>metric 0 mtu 1500
          ng2: flags=8890 <pointopoint,noarp,simplex,multicast>metric 0 mtu 1500
          ng3: flags=8890 <pointopoint,noarp,simplex,multicast>metric 0 mtu 1500
          ng4: flags=8890 <pointopoint,noarp,simplex,multicast>metric 0 mtu 1500
          ng5: flags=8890 <pointopoint,noarp,simplex,multicast>metric 0 mtu 1500
          ng6: flags=8890 <pointopoint,noarp,simplex,multicast>metric 0 mtu 1500
          ng7: flags=8890 <pointopoint,noarp,simplex,multicast>metric 0 mtu 1500
          ng8: flags=8890 <pointopoint,noarp,simplex,multicast>metric 0 mtu 1500
          ng9: flags=8890 <pointopoint,noarp,simplex,multicast>metric 0 mtu 1500
          ng10: flags=8890 <pointopoint,noarp,simplex,multicast>metric 0 mtu 1500
          ng11: flags=8890 <pointopoint,noarp,simplex,multicast>metric 0 mtu 1500
          ng12: flags=8890 <pointopoint,noarp,simplex,multicast>metric 0 mtu 1500
          ng13: flags=8890 <pointopoint,noarp,simplex,multicast>metric 0 mtu 1500
          ng14: flags=8890 <pointopoint,noarp,simplex,multicast>metric 0 mtu 1500
          ng15: flags=8890 <pointopoint,noarp,simplex,multicast>metric 0 mtu 1500
          ng16: flags=8890 <pointopoint,noarp,simplex,multicast>metric 0 mtu 1500</pointopoint,noarp,simplex,multicast></pointopoint,noarp,simplex,multicast></pointopoint,noarp,simplex,multicast></pointopoint,noarp,simplex,multicast></pointopoint,noarp,simplex,multicast></pointopoint,noarp,simplex,multicast></pointopoint,noarp,simplex,multicast></pointopoint,noarp,simplex,multicast></pointopoint,noarp,simplex,multicast></pointopoint,noarp,simplex,multicast></pointopoint,noarp,simplex,multicast></pointopoint,noarp,simplex,multicast></pointopoint,noarp,simplex,multicast></pointopoint,noarp,simplex,multicast></pointopoint,noarp,simplex,multicast></pointopoint,noarp,simplex,multicast></pointopoint,noarp,simplex,multicast></learning,discover,autoedge,autoptp></learning,discover,autoedge,autoptp></up,broadcast,running,simplex,multicast></up,loopback,running,multicast></up,running></up,running></promisc></hostap></up,broadcast,running,promisc,simplex,multicast></full-duplex></rxcsum,txcsum,vlan_mtu,wol_ucast,wol_magic></up,broadcast,running,simplex,multicast></rxcsum,txcsum,vlan_mtu,wol_ucast,wol_magic></broadcast,simplex,multicast></full-duplex></rxcsum,txcsum,vlan_mtu,wol_ucast,wol_magic></up,broadcast,running,promisc,simplex,multicast>

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.