Dhcpd failing in 1.2.3-RC3 built on Tue Sep 8 00:18:28 UTC 2009
-
Dhcpd failing in 1.2.3-RC3 built on Tue Sep 8 00:18:28 UTC 2009.
Anyone else having this issue.
Sep 9 14:12:11 dhcpd: Internet Systems Consortium DHCP Server V3.0.7
Sep 9 14:12:11 dhcpd: Copyright 2004-2008 Internet Systems Consortium.
Sep 9 14:12:11 dhcpd: All rights reserved.
Sep 9 14:12:11 dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
Sep 9 14:12:11 dhcpd: vr2: not found
Sep 9 14:15:53 dhcpd: Internet Systems Consortium DHCP Server V3.0.7
Sep 9 14:15:53 dhcpd: Copyright 2004-2008 Internet Systems Consortium.
Sep 9 14:15:53 dhcpd: All rights reserved.
Sep 9 14:15:53 dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
Sep 9 14:15:53 dhcpd: vr2: not foundFixed it by doing an up-grade to built on Tue Sep 8 23:17:53 UTC 2009.
James
-
Looks like it had a config for a network card that was missing from the system at the time it was running.
A reboot may have fixed that if it was having trouble detecting the NIC, or it could have been something in that update.
-
Looks like it had a config for a network card that was missing from the system at the time it was running.
A reboot may have fixed that if it was having trouble detecting the NIC, or it could have been something in that update.
DHCPD is not working in mine. I even used the latest snapshot using automatic update to point to :
http://snapshots.pfsense.org/FreeBSD_RELENG_7_2/pfSense_RELENG_1_2/.updaters
I looked up under Status Services and it says DHCPD is stopped and is in red. Repeated click of start /play is also not able to fix this problem.
Service
Description
Status
dnsmasq DNS Forwarder
Running
[Restart Service] [Stop Service]
ntpd NTP clock sync
Running
[Restart Service] [Stop Service]
dhcpd DHCP Service
Stopped -
Anything reported in Status -> System logsĀ DHCP tab?
-
Anything reported in Status -> System logsĀ DHCP tab?
Here is what I found as repetition (a few times):
Oct 4 23:21:28 dhcpd: Internet Systems Consortium DHCP Server V3.0.7
Oct 4 23:21:28 dhcpd: Copyright 2004-2008 Internet Systems Consortium.
Oct 4 23:21:28 dhcpd: All rights reserved.
Oct 4 23:21:28 dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
Oct 4 23:21:28 dhcpd: Wrote 0 deleted host decls to leases file.
Oct 4 23:21:28 dhcpd: Wrote 0 new dynamic host decls to leases file.
Oct 4 23:21:28 dhcpd: Wrote 0 leases to leases file.
Oct 4 23:21:28 dhcpd: Listening on BPF/fxp1/00:02:b3
ad:50/192.168.3/24
Oct 4 23:21:28 dhcpd: Sending on BPF/fxp1/00:02:b3ad:50/192.168.3/24
Oct 4 23:21:28 dhcpd: Sending on Socket/fallback/fallback-net
Oct 4 23:21:28 dhcpd: There's already a DHCP server running -
Anything reported in Status -> System logsĀ DHCP tab?
Strange, that now DHCPD is up as per Status >> Services
But it is not serving IP address to any machines on the lan.
Any suggestions?
-
From the shell see if there is really a dhcpd running:
# ps ax | grep dhcpdIf so, kill every copy..
Is there a file containing the pid of a dhcp left over from a previous run of dhcpd?
# lsĀ /var/dhcpd/var/run/dhcpd.pidIf so, delete it:
# rm /var/dhcpd/var/run/dhcpd.pidThen restart dhcpd (Uncheck the "Enable" box on the appropriate tab(s) under Services -> DHCP Server then click on Save, then check the box and click on Save)
Does dhcp service now work?
-
This did the trick. I think this is working now.Ā Here is the output from issuing those commands (I used pfsense DIAGNOSTICS >> COMMAND to do that):
$ ps ax | grep dhcpd 39290Ā ??Ā IĀ Ā Ā 0:00.00 /usr/local/sbin/dnsmasq --all-servers -l /var/dhcpd/v 39410Ā ??Ā SĀ Ā Ā 0:00.00 sh -c ps ax | grep dhcpd 39412Ā ??Ā SĀ Ā Ā 0:00.00 grep dhcpd $ lsĀ /var/dhcpd/var/run/dhcpd.pid /var/dhcpd/var/run/dhcpd.pid $ rm /var/dhcpd/var/run/dhcpd.pid -
I'm having the same problem. I rebooted and it still wasn't working right. There were no dhcpd processes running according to ps but the logs said "There's already a DHCP server running." but when I deleted the PID file and unchecked the "Enable DHCP server on LAN interface" box, saved, then rechecked and saved it started working fine again.
Mine's a pretty plain installation. I'm using the captive portal, have the nut package installed, use the traffic shaper, have one WAN, one LAN and one OPT interface, use https for accessing pfsenseā¦. that's about all the configuring i've done that I can think of.
I'll check it out a bit more tonight when nobody is needing access to the internet and post my findings, if any.
Mark
Edit: Forgot to mention, i'm using 1.2.3-RC3 built on Tue Oct 6 01:32:12 UTC 2009
Second edit: Perhaps the PID file doesn't get removed when the process is killed?
-
I suspect that if dhcpd is terminated by the operating system due to a programming bug (for instance accessing 'forbidden' memory) or a misdirected kill the .pid file won't be deleted. Then when dhcpd starts again it will see the .pid file and assume there is another copy of the dhcpd process running in the system.
Perhaps there is a .core file present which might be able to be used to further diagnose the problem.
If dhcpd is stopped through the recommended means it should delete the .pid file allowing it to be restarted such that service is resumed
-
Well, I rebooted again and the problem didn't rear it's ugly head. The PID file was deleted and replaced by the system after reboot. I checked for any core files but there are none. I'm wondering if in my case it was just a glitch. I had updated from 1.2.3 RC2 just before I had this issue so maybe that had something to do with it. Either way i'm going to say that i'm good for now but i'll post again if it crops up again. Thanks guys.
