Cant access any computers on domain

afvadmin

so i should push the default gateway of the domain i want to connect to so that the vpn client has the same default gateway as the domain

Cry Havok

You need to ensure 2 things:

On your network, either the VPN server is the default gateway, or the servers know how to reach the VPN client
The VPN client knows how to reach the servers on the network

In other words, basic routing. It sounds like you've done (2) since you can ping "the dns" (which I'm guessing is your DNS server on the network).

afvadmin

the vpn server which would be pfsense is the gateway it is the one responsible for distributing the dhcp addresses to the client, also isnt a vpn suppose to allow you to be able to ping ip addresses from the lan subnet which would automatically allow you to ping the dns server, and to ensure this i pushed the dns server and domain name to the client .

NB i tried using the push "redirect-gateway def1" to push the gateway to the client , i ended up with the ip address of the pfsense box which is 192.168.xxx.5 as the default gateway on the client

Cry Havok

Your single, massive, sentence is hard to read. I think you're saying that your VPN server is your gateway?

VPN servers only provide connectivity between 2 networks by "hiding" the bit in between. Basically, you can treat a VPN as you would a router - but that means you need to make sure your basic networking is in place.

You are using different IP ranges for your VPN, local network and client network?

afvadmin

the lan subnet is 192.168.0.0 the cleint is 10.10.10.0

Cry Havok

And what are you using for the VPN?

afvadmin

the ip of the vpn is 192.168.200.0

afvadmin

ok so what i needed was to bridge the connections of the vpn to the lan or create a wins server , went with bridging since it is better for most programs, so now i can access shares on the network and i have read access but i dont have write access eg a zipped file will copy to the mapped drive and it will take like forever to unzip

BrianBonnell

Enable NETBIOs on the VPN connections. I did this and now I can access my entire domain.

afvadmin

ok ill try this today sorry about taking so long to answer have been really tied up in work and school, ok well my vpn is bridged

afvadmin

ok still cant access im trying to run a program of the server i have the access to view the shared folder but jus cant run the program i even installed the program pointed it to the ip address of the server so it would get its data from the server and the program fails to run as a matter a fact i cant even install a program from the network share do you think this is a windows server problem or it just cant be fixed cause open vpn stats for certain programs you either have to build a samba or wins server or bridge the connection and i went with bridging an still cant get through i even entered custom options so that the vpn connection would have an ip just like the domain is there any setting i overlooked or anything on my dns server i have to do

Cry Havok

Can you:

a) See the share from the VPN?
b) Connect to the share from the VPN?
c) See the contents of files on the share from the VPN?
d)
1) Ping the server from the LAN?
2) Ping the server from the VPN?

afvadmin

Can you:

a) See the share from the VPN?
yes

b) Connect to the share from the VPN?
yes i mapped a drive

c) See the contents of files on the share from the VPN?
yes i can copy files from the shared folder

d)
1) Ping the server from the LAN?
yes

2) Ping the server from the VPN?
yes

only thing is cant run a program from the vpn and cant copy to the vpn i think ill give the authentication in open vpn with the ldap service

Cry Havok

When you say "to the vpn" - exactly what do you mean? You've already said you can connect to, and use, shares at the far end of the VPN so there's no obvious problem.

afvadmin

what i mean is if i copy a file the the vpn i usually get an error ill try it again to give you the exact code i had it written down somewhere

Cry Havok

Sounds like a file/share permissions error on the server - nothing to do with the VPN since you can copy files off of the share.

Are you authenticating to the file server?

Does it work, copying a file to the file server, from the local network?

afvadmin

honestly i dont think im authenticating i tried to get the authentication going with the ldap authentication post but it may be my pfsense version is to old cause i cant add the needed packages

Cry Havok

No, not authentication to pfSense, authentication to the file server - the 2 are completely unrelated.

When you connect to the file server, do you have to specify a username and password?

afvadmin

im on a domain, and i am the administrator i can simply browse the network, if i use an alternate user on the computer which is not on the domain then it does ask for user name and password

Cry Havok

And from the VPN?