Route LAN and OPT
-
Hi All. I have the following setup:
(WAN) –--pfsense ---LAN ---192.168.200.0/24 --switch ---W2k8, DHCP, DNS, Radius, etc.
|
|
opt - 10.0.0.1/16
|
|----switch --- Mikrotik Routerboard - 10.0.0.10
|
|
laptop - 10.0.0.35I'm trying to route LAN and OPT. I believe I've configured appropriate rules (basically to allow anything from LAN to OPT and from OPT to LAN)....but:
1. Laptop hardwired as in diagram, can ping Mikrotik @ 10.0.0.10.
2. Laptop hardwired as in diagram, can ping 10.0.0.1 and 192.168.200.1, 192.168.200.2, etc.3. Laptop wireless with 192.168.200.101 address can ping 192.168.200.1, and 10.0.0.1.
4. Laptop wireless with 192.168.200.101 CANNOT ping 10.0.0.10 (nor connect via Winbox)5. Mikrotik can ping 10.0.0.1 (static route in Mikrotik of 0.0.0.0 via 10.0.0.1)
6. Mikrotik cannot ping 192.168.200.1Firewall logs show traffic is allowed and going between LAN and OPT (it'll show pings from laptop to mikrotik), but the requests still time out.
Should copying the default rule from the LAN interface be sufficient enough? I'll delete my rules on OPT and try that if it's suggested.
Thanks in advance!
-
plz post your rules! and you should the only bridge options for have 'opt1' set to (lan) and the 'type' set to static