Setup PKI VPN between pfsense and OSX (viscosity)
-
I've never had so much difficulty setting something up that appears to be simple. All of the doc's that I get redirected to refer to pfsense v2.0, so I can't seem to find a good step by step tutorial.
I've run the commands found here, and they've created the following file list
total 54
-rw-r–r-- 1 root wheel 4022 Apr 16 20:52 01.pem
-rw-r--r-- 1 root wheel 3905 Apr 16 20:55 02.pem
-rw-r--r-- 1 root wheel 3971 Apr 16 21:18 03.pem
-rw-r--r-- 1 root wheel 1322 Apr 16 20:52 ca.crt
-rw------- 1 root wheel 887 Apr 16 20:52 ca.key
-rw-r--r-- 1 root wheel 3905 Apr 16 20:55 client1.crt
-rw-r--r-- 1 root wheel 692 Apr 16 20:55 client1.csr
-rw------- 1 root wheel 891 Apr 16 20:55 client1.key
-rw-r--r-- 1 root wheel 245 Apr 16 20:55 dh1024.pem
-rw-r--r-- 1 root wheel 3971 Apr 16 21:18 frodo.crt
-rw-r--r-- 1 root wheel 822 Apr 16 21:18 frodo.csr
-rw------- 1 root wheel 887 Apr 16 21:18 frodo.key
-rw-r--r-- 1 root wheel 382 Apr 16 21:18 index.txt
-rw-r--r-- 1 root wheel 20 Apr 16 21:18 index.txt.attr
-rw-r--r-- 1 root wheel 20 Apr 16 20:55 index.txt.attr.old
-rw-r--r-- 1 root wheel 241 Apr 16 20:55 index.txt.old
-rw-r--r-- 1 root wheel 3 Apr 16 21:18 serial
-rw-r--r-- 1 root wheel 3 Apr 16 20:55 serial.old
-rw-r--r-- 1 root wheel 4022 Apr 16 20:52 server.crt
-rw-r--r-- 1 root wheel 692 Apr 16 20:52 server.csr
-rw------- 1 root wheel 887 Apr 16 20:52 server.keyWhich files do I need to put in the pfsense server config area, and which files do I need to input into Viscosity? I've tried what I 'think' is correct, but I keep getting rejected.
-
Server:
ca.crt
server.crt
server.key
dh1024.pemClient:
ca.crt
client1.crt
client1.key -
@kpa:
Server:
ca.crt
server.crt
server.key
dh1024.pemClient:
ca.crt
client1.crt
client1.keyWorked like a champ thanks (PS - Client1 was actually "frodo" in my situation)