Block Outgoing traffic if Openvpn goes down
-
Hi,
congratulations to PFSense. I like it, even if i have a small Problem:
I'am trying to block outgoing traffic if my OpenVPN not works. My config actually is:
WAN - WWW Gateway
LAN - "OpenVPN only Area"Is there any way to enable a firewall rule like
- LAN net * * * * none Default allow LAN to any rule
- WAN net * LAN net * * none Default allow wan to lan rule
TCP/UDP * * * * * none block all rest
depending on the OpenVPN Status. It should work like this:
OpenVPN OK -> rule is enabled, all traffic can pass through
OpenVPN NOK -> rule disabled, all outgoing lan traffic is blockedGreetings
Shareria -
* WAN net * LAN net * * none Default allow wan to lan rule
O___o !!
-
Haven't done this, but you could try to make openvpn to your gateway or route by lan rule and after that rule block anything.
-
@ericab: My WAN is behind another HW-router
@Metu: I tried to make a Gateway but i havent a static openvpn ip and i cant inster an alias as gateway