OpenVPN All Traffic Routing

serialdie

I have been searching the forum and I have not found a clear answer.

I am trying to get all my openvpn clients to pass threw all traffic threw the openvpn server.

What do I need to do?

All clients are connected right now but all of the internet traffic goes threw there local LAN and out to there ISP.

I put in custom options push "redirect-gateway def1" and all of there internet stops…. they can ping the openvpn router but they can not browse the internet.

I am using pfsense as the openvpn server.

Any Ideas?

TIA!

serialdie

Ok so now I have

push "route 10.30.2.0/255.255.255.0";push "redirect-gateway def1";push "dhcp-option DNS 10.30.2.1"

And still the client is unable to get out to the internet.
We can ping each other back and forward but the client does not have internet access.

Any ideas please?

I do have under Outbound NAT the following:

Interface	Source	Source Port	Destination	Destination Port	NAT Address	NAT Port	Static Port	Description	

WAN  	 10.30.5.0/32	 *	                      *	                      *	                          *	          *	             NO

jimp

This is probably because they aren't getting NAT applied.

Enable manual/advanced outbound NAT. Add an outbound NAT rule like the one for LAN that will match the subnet of your VPN clients.

serialdie

jimp,

As all ways thanks for your help!

So it should look like this?

jimp

The part of the screen I'd need to see is too small to make out for sure, but if that second rule is your VPN client subnet it should be OK.

serialdie

OK I am going to give it a try.

Thank You!

serialdie

Thanks it worked!